Owning a Xiaomi fitness tracker is a convenient way to monitor health, but users often face the question of how to properly connect the device to the network. Charging Xiaomi Mi Band 4 has its own features that differ from standard smartphones or smartwatches. Mishandling contacts can lead to oxidation or even breakage of the device, so it is important to know the technical nuances.
In this article, we will discuss in detail the process of connecting the tracker to the power source, consider typical beginner errors and give tips for extending the battery life.
Charger design and contact search
The first thing to do before starting the procedure is to remove the tracker itself from the silicone strap.The Mi Band 4 capsule sits tightly in the pad, so a careful effort is required.Push the thumb on the convex part of the screen on the back side or use a special recess in the strap to push the module out.
And on the bottom of the capsule are two golden contacts, and they're the ones that transmit power. USB-It's a connector, unlike some of the competitors, and it uses a special cable that came with the gadget to connect.
The design of the cable is USB-The plug on one side and the plastic holder with two convex pins on the other, these pins should match perfectly with the grooves on the tracker. If you lost the original wire, you can get a universal counterpart, but the quality of the contact can vary.
- 🔌 The cable is shaped and not suitable for other models without adapters.
- 💡 Gold spots on the tracker must be kept clean for stable operation.
- ⚙️ Plastic holder locks the device, preventing accidental disconnection.
⚠️ Warning: Don't put too much effort into removing the tracker from the strap.A sharp jerk can damage the silicone or scratch the capsule body.
Step-by-step instructions for connecting to the network
The process of connecting to the grid is simple, but it requires attention to detail. USB-And the end of the cable is in any free port, and it could be a connector on a computer, a laptop, a power bank, or a smartphone adapter.
Then take the tracker capsule and attach it to the cable holder, and you should feel a slight click or a stop when the magnets or the shape of the plastic fixes the device, and make sure that the convex contacts on the cabal have entered the recess on the tracker.
If done correctly, the battery animation will appear on the Mi Band 4 screen and the indicator will light up. The screen may not immediately light up, sometimes you need to wait a couple of seconds for the system to recognize the current.
☑️ Connection check
In rare cases, the device may not respond the first time, so try to move the capsule slightly in the holder or wipe the contacts with dry cloth, and dust and sweat can create an insulating layer that prevents charging.
Status indication and charging time
Understanding light signals helps control the process. The Mi Band 4 tells the user the current status of the battery. Usually, green means that energy storage is underway, and red indicates a critically low level.
It takes 1 to 2 hours to fully charge the device, depending on the residual capacity. It is not recommended to keep the tracker on charging longer than necessary, although modern power controllers are able to cut off current when reaching 100%.
It's worth noting that while charging, the screen may occasionally go out to save energy, but when touching or raising the wrist, it should show the current percentage. If the screen doesn't light up at all, check the power source.
| Status of the indicator | Meaning | Action. |
|---|---|---|
| Burning green. | Charging's coming. | Wait for completion |
| Blinks red. | Battery's dead. | Connect to the network. |
| Burning green (100%) | Charge full. | Turn off the device. |
| It's not burning. | No contact. | Check the connection. |
💡
It is optimal to put a tracker on charging at night if you use it actively during the day, but it is better to do it an hour before bedtime to track the process.
Typical problems and methods of their solution
Sometimes users are faced with a situation where the fitness bracelet stops responding to the connection, the most common reason is the oxidation of contacts, because the device is worn on the wrist, it constantly gets sweat and moisture, which over time creates plaque.
To fix the problem, take a cotton swab, lightly moisten it with alcohol, or just use a dry soft cloth. Carefully wipe the gold patches on the tracker and the pins on the cable. Often after this procedure, charging resumes.
Another problem could be a software failure: If the device is "hanging," try restarting it through the menu or waiting for it to completely discharge, and then recharging again, and in critical cases, resetting to factory settings helps.
What do you do if the tracker is swelling?
It's also worth checking the cable itself. The wires often break at the base of the plug. Try to bend the cable slightly in different places during charging. If the indicator only lights up in a certain position, then the wire is damaged inside the insulation.
Use of alternative sources of nutrition
Many people wonder if it is possible to charge the Xiaomi Mi Band 4 from powerful fast-charging adapters.Theoretically, the device will take as much current as it needs, but practice shows that using older adapters with a current of 1A (5V 1A) is safer.
Charging from USB-The current is standard and won't hurt the power controller of the tracker, but it's slower than the network adapter.
There are wireless charging stations for the Mi Band 4, which are induction-based, and you don't have to take the tracker out of the strap all the time, which is convenient, but you have to buy these accessories separately.
- 💻 USB-The computer port is the safest but slowest option.
- 🔌 adapter 5V 1A — Optimal balance of speed and safety.
- ⚡ Fast-charging units (QC 3.0) - use with caution.
Prevention and extension of battery life
To make the Mi Band 4 battery last a long time, it is not recommended to allow it to be completely discharged to zero. Lithium polymer batteries are better able to tolerate frequent recharges than deep discharge cycles. Try to put the device on charge when the energy level drops to 15-20%.
Avoid extreme temperatures. Don't leave the tracker on charge in direct sunlight or in the cold. High temperatures accelerate the degradation of battery chemistry, and low temperatures temporarily reduce capacity.
If you plan to not use the bracelet for a long time, charge it to about 60% and turn it off.Storing a fully discharged device can lead to a deep discharge, after which it will be impossible to restore the battery.
⚠️ Warning: Never leave the tracker on charge in areas with high humidity, such as the bathroom.Water can get into the connectors and cause a short circuit.
Regularly update your firmware through the Mi Fit or Zepp Life app. Xiaomi engineers often release updates that optimize power consumption and improve the charge controller.
💡
Compliance with the temperature regime and the lack of full discharge are two main factors in the long life of your tracker battery.