The first launch of the electric scooter Xiaomi Pro: full instructions with photos and videos

Where to start: Preparing for the first launch

The Xiaomi Electric Scooter Pro (or Mi Electric Scooter Pro) is not just a transport, but a smart device with its own software. Its first run requires more attention than a conventional mechanical scooter. If you've just unpacked a box with the Mi logo, take your time to press the power button. First, make sure all components are in place and the device is ready for use.

Included with a scooter must be:

• 🔋 Charger (220V) → 42B, with a socket under the steering wheel)
• 🔧 Multifunction key (for folding the steering wheel and fixing)
• 📄 Warranty card and instructions in several languages (including Russian)
• 🛴 Additional screws for mounting the steering wheel (sometimes lie in a separate bag)

If something is missing, don’t turn on the scooter, first contact the seller. The absence of even a small part (for example, a screw) can lead to breakage when driving.

Before first turning on, check:

• 🔄 The condition of the wheels - they must rotate freely, without extraneous sounds
• 🔋 Battery level (indicator on the steering wheel when the power button is pressed)
• 🛠️ Whether all bolts are tightened (especially on the steering column and folding mechanism)

Xiaomi Pro comes with battery discharged to 30-40% — This is normal for lithium-ion batteries when stored.

Step 1: Charge before the first start

The first time a Xiaomi Pro scooter is turned on without fully charging is a major mistake that shortens battery life. Lithium-ion batteries (in this 474 Wh model) require proper initialization. Here's how to do it:

1. Put the charger on the scooter, then on the socket. Order matters. First, the socket on the steering wheel, then the plug on the grid.
2. Wait for the green light on the charger. The full charge cycle takes up 5-7 hours (depending on the level of discharge).
3. Don't interrupt the process, even if the light on the scooter shows 100% sooner, wait until the green light on the power supply lights up.

⚠️ Note: Using non-original chargers (even with suitable characteristics) can cause the battery to overheat or the protection to go off. Xiaomi Pro is equipped with a controller BMS, If the scooter is not charging, check it:

• 🔌 Correct connection of the connector (must be clicked)
• 🔋 Contact state (oxidation or dirt may interrupt the connection)
• 🔄 Try another outlet (probably a security machine worked)

Step 2: Assembly and adjustment of the scooter

Xiaomi Electric Scooter Pro comes in a semi-assembled form: the steering wheel is folded, and the front wheel can be fixed by transport screws. Here is how to properly assemble a scooter before the first launch:

1. Unlock the folding mechanism: Find the lever under the steering wheel (right or left, depending on the model). Press it and pull the steering wheel up to the click. Tighten the locking screw with the key from the kit (puffing moment — 4-6 N).
2. Check tire pressure: Optimal pressure for Xiaomi Pro — 35-45 PSI (2.4–3.1 Use a pressure gauge: too low pressure worsens coasting, high pressure worsens the risk of puncture.

Adjust the height of the steering wheel

• Relax the clamp under the steering wheel, set a comfortable height.
• Tighten the screw back (do not pull over - this can damage the folding mechanism).

⚠️ If the scooter was bought in winter and stored in the cold, before assembly give it to the owner. 2-3 The condensation inside the electronics can cause a short circuit on the first switch on.

Step 3: First Enable and Configure via Mi Home

Now that the scooter is assembled and charged, it's time to turn it on. The Xiaomi Pro's first run procedure is different from re-energizing - the device requires initialization. Here's a step-by-step instruction:

1. Turn on the scooter: Press the power button for 3 seconds (must sound the beep). The display will light up the battery indicators and the lock icon (locks).
2. Unlock the scooter: Press the power button briefly, the lock icon will disappear. If the scooter does not unlock, check if the child lock is activated (in some firmware it is on by default).

Connect to the Mi Home app

• Download the Mi Home app (available for iOS and Android).
• Sign up or sign in to your Xiaomi account.
• Click Add Add the device (+) → Electric scooter → Xiaomi Electric Scooter Pro.
• Follow the instructions on the screen (you will need to turn on Bluetooth and GPS).

After connecting in the application will be available:

• 📊 Travel statistics (distance, speed, energy consumption)
• 🔒 Setting up PIN-scooter-lock
• 🔄 Update of firmware (if a new version is available)
• 🛠️ Error Diagnosis (Flaw codes with decoding)

⚠️ Note: If the scooter is not connected to the application, try it:

• 🔄 Reboot the scooter (hold the power button for 10 seconds).
• 📱 Reinstall the Mi Home app (sometimes cache cleaning helps).
• 🔋 Make sure your battery level is above 20% (when Bluetooth is low, it may not work).

💡

If you already have other Xiaomi devices (like a smart lamp or a robot vacuum cleaner), add a scooter to the same Mi Home account.

Step 4: Testing and Test Trip

Before you go on your first trip, you need to check all the scooter systems. 5-10 You can keep the road from getting into trouble:

After the test, you can start a test trip, choose a flat area without obstacles (for example, an empty parking lot or a bike path).

• 🚦 Start with first speed (Eco mode in the Mi Home app).
• 🛑 Practice braking smoothly, without locking the wheels.
• 🔄 Try turning the steering wheel at low speed to feel manageable.

⚠️ Note: Avoid the first trips:

• 💦 Meadow and wet asphalt (risk of aquaplanning on narrow wheels).
• 🚧 Pits and bumps (depreciation Xiaomi Pro is not designed for extreme loads).
• 🏃‍♂️ Acceleration (protection against overheating of the engine may work).

💡

The first 100 km on a new scooter is a run-in period, during which time avoid maximum loads (high speed, overload by weight, frequent braking) and this will prolong the life of the battery and the engine.

Step 5: Set up ride profiles and update firmware

After a successful test trip, you can customize the scooter to your preferences. Xiaomi Pro supports three main driving modes, which differ in speed and power consumption:

The regime may be changed:

• Through the button on the steering wheel (double press switches modes).
• In the Mi Home app (Settings section) → Driving modes).

It is also recommended to update the firmware of the scooter to the latest version, which will fix possible bugs and improve stability.

1. Open Mi Home and select your scooter.
2. Go to Settings → Update firmware.
3. If a new version is available, click Update.
4. Wait until the scooter is completed (reboot automatically).

⚠️ Note: During the firmware update:

• 🔋 Do not turn off the scooter from charging (if the battery level is below 50%, connect the charger).
• 📶 Do not interrupt the connection to the phone (close to the router is not important – the update is via Bluetooth).
• ⏳ Do not use the scooter until the process is complete (may take up to 10 minutes).

Step 6: Care after the first start and operating tips

To make Xiaomi Electric Scooter Pro last, follow these care rules after the first launch:

• 🔋 Charging: Charge the battery after each use, even if you have passed all the time. 5-10 Do not leave the scooter unloaded for a long time (minimum) 20% Use only the original charger.
• 🧹 Cleaning: After riding in mud or rain, wipe the scooter with a wet cloth (no detergents!).Do not direct the jet of water to the electronics (especially the controller under the platform).
• 🛠️ Maintenance: Check tire pressure and bolt tightening every 500 km. Lubricate wheel bearings every 1000 km (use special lubricant for electric scooters).

Also pay attention to these nuances:

• 🌡️ Temperature: Operate the scooter at a temperature from -10°C +40°C. In the cold below -10°C battery loses to 30% The rods are hard, and the rubber becomes hard.
• 🚫 What not to do: Carry passengers (maximum load — 100 Driving in deep snow or sand (risk of overheating the engine) Charging the scooter immediately after driving (let the battery cool down). 15-20 minute).

💡

If you plan to store the scooter in winter, charge the battery to 60-70% And turn it off (if the model supports a removable battery), store it in a dry place at room temperature, and turn it on once a month. 10 minutes to maintain the battery's health.

Frequent errors in the first run and how to avoid them

Even experienced users sometimes make mistakes when first turning on Xiaomi Pro. Here are the most common problems and solutions:

If none of these solutions worked, contact Xiaomi Service Center. Don’t try to disassemble the scooter yourself, it will deprive you of warranty. In Russia and CIS countries, official service centers are in most major cities (the list can be found on the website mi.com).

FAQ: Frequent Questions About the First Launch