The first launch of the electric scooter Xiaomi 1S: Full instructions with photos and tips

Why Xiaomi is the Right Startup 1S important for safety and durability

Xiaomi Mi Electric Scooter 1S — One of the most popular compact vehicles for the city, but its first run is often accompanied by errors. Improper assembly, ignoring calibration or neglecting settings in the application can lead to unstable battery operation, false brakes or even a controller breakdown in the first months of operation.

In this article, we will analyze the entire process – from unpacking the box to a test trip – taking into account the unique features of the model. 1S (Unlike the basic version without the letter "S"), such as an improved regenerative braking system and an updated BMS-You will also learn how to avoid the common mistakes that 80% of newcomers make when they first turn on.

If you bought a used scooter or it lay for a long time without using - at the end of the article there is a separate section with instructions for "resuscitation" of the battery and resetting the settings to the factory.

Unpacking and checking the configuration Xiaomi 1S

Before the first launch, you need to make sure all the elements are in place and not damaged. - Xiaomi's standard box 1S must:

• 🛴 Scooter folded (with protective film on the display)
• 🔌 Charger (29,4V, 1,5A) European-fork
• 🔧 Multifunction key (for folding the steering wheel and adjusting)
• 📄 Warranty card and brief instructions in 5 languages (including Russian)
• 🔄 4 spare screws for mounting the steering wheel (often lie in a separate bag)

What if something is missing? If there is no charger or key in the box, it is an excuse to go to the store within 14 days (under consumer law), screws and instructions can be purchased separately, but the absence of a charger or key makes the scooter unusable.

Pay attention to the appearance of the scooter:

• 🔍 Wheels should not have dents or cracks. Check the pressure (normal: 35-40 PSI front-and-front 40-45 PSI back-to-back).
• 🛡️ Frame - inspect welded seams for rust (relevant for used models).
• 🔋 Battery compartment - the cover should close tightly without backlash.

⚠️ Warning: If there are traces of falls on the scooter (scratches on the steering wheel or chips on plastic), this may indicate hidden damage to the controller or battery. In this case, before the first start, be sure to check the battery voltage with a multimeter (normal: 36-42V).

Assembly and preparation for first inclusion

Unlike newer models (e.g. Xiaomi Pro 2 or 4 Lite), the 1S The steering wheel is folded and requires fixation:

1. Open the scooter by pressing the folding lever (located at the base of the steering column).
2. Put the steering wheel in the groove before you click. Make sure the locking pin enters the hole.
3. Use a multifunction key to tighten the 4 screw on the steering column (moment of tightening: 5-7 Nm. Don't pull over - it could damage the thread!
4. Check the back-up: get behind the wheel and swing it back and forth. 1-2 mm.

After assembly of the steering wheel, you need to adjust the height. The optimal height of the steering wheel is defined as: stand on a scooter, your hands should be slightly bent at the elbows (angle). ~120°). For adjustment:

1. Relax the clamp screw on the steering column (use the key).
2. Raise or lower the steering wheel to the desired level.
3. Tighten the screw back (puffing moment: 4-5 Nm).

Unpack and check the complete set|Collect and lock the steering wheel|Adjust the height of the steering wheel|Check the tire pressure.|Examine for damage-->

Important nuance: If you bought a used scooter, be sure to check if the controller settings are not knocked down. To do this, turn on the scooter (press the power button for 3 seconds) and look at the display. If chaotic symbols are burning instead of the usual icons or the scooter does not respond to gas, you will need to reset the settings (instructions in the section below).

First switching on and calibration of electronics

Before the first launch of Xiaomi 1S You have to calibrate the system, and that's going to help you avoid problems with false brakes or uneven acceleration:

1. Place the scooter on a flat surface (asphalt or tiles). Avoid carpets or irregularities.
2. Press the power button for 3 seconds until the display lights up. "Mi" will appear on the screen.
3. Without releasing the power button, press the brake lever (left on the steering wheel) and hold both buttons for another 5 seconds until the display blinks twice.
4. Release both buttons. The scooter will sound, calibration complete.

If the calibration fails (the display fails to blink or the scooter fails to make sound), repeat the process. If the problem persists, this may indicate:

• 🔋 Battery discharge (charge below 10%).
• 🛠️ Failure of the brake sensor (check the wiring under the steering wheel).
• 🔧 Controller failure (reflashing will be required).

After successful calibration, check the operation of all buttons:

⚠️ Warning: If the scooter spontaneously accelerates or brakes after calibration, this is a sign of malfunction of the hall sensors in the engine!

Recharge the battery before the first trip

Xiaomi battery 1S has a capacity of 275 Wh (36V, 7800 mAh) and requires the right first charge to extend its lifespan:

• 🔌 Use only the original charger (29,4V, 1,5A). Charges from other models (for example, M365 or Pro) may damage the battery.
• ⏳ The first charge should last at least 5-6 Even if the indicator shows 100% earlier.
• 🌡️ Charge at temperature 10-25°C. Charging in the cold or heat reduces the battery life on the 30%.
• 🔋 Do not leave the scooter on charging for more than 8 hours - this can lead to overcharging.

Step-by-step charging process:

1. Connect the charger first to the scooter, then to the socket (this protects against voltage surges).
2. The indicator on the charge should burn red (charging is going) or green (fully charged).
3. On the scooter display, an animation of charging (running strips) will appear.
4. After completing the charging, first turn off the charging from the socket, then from the scooter.

If the indicator on the charger does not burn or flashes, this indicates a problem:

• 🔌 Faulty charger (check on another scooter).
• 🔋 The charger connector on the scooter is damaged (look for oxidation).
• 🛠️ Faulty. BMS-Controller (diagnosis required).

💡

If the scooter has not been used for a long time (more) 3 months), complete 2-3 Complete discharge/charging cycles to restore battery capacity.

Setting up the Mi Home mobile application

For full use of Xiaomi 1S You need to connect it to the official Mi Home app (available for Android and iOS:

• 📊 Track mileage, speed and charge level in real time.
• 🔧 Configure driving modes (Eco, Standard, Sport).
• 🔒 Install PIN-stealer-code.
• 🛠️ Update the firmware (relevant for 2021 models and newer).

Instructions for connection:

1. Download and install Mi Home from the official store (App Store or Google Play).
2. Sign up or sign in to your Xiaomi account.
3. Press "Add device" → Select the category "Transport" → "Electric scooter" → "Mi Electric Scooter 1S".
4. Turn on Bluetooth on your phone and follow the instructions on the screen.
5. When the app asks, press the power button on the scooter for 5 seconds until you hear the beep.

After connecting, it is recommended to perform the following settings:

First Trip: Safety Rules and Testing

Before your first trip, check:

• 🛡️ Protective gear: helmet (required!), elbow pads and knee pads. Statistically, 70% of scooter injuries are due to the absence of a helmet.
• 🚦 Place to test: choose an empty parking lot or a quiet street without cars!
• 📱 Phone: put it in your pocket or backpack.Police traffic is prohibited by traffic rules.

Testing procedure:

1. Stand on the scooter, one foot on the platform, the other on the ground. Press the power button to turn it on.
2. You can press the gas (right lever) very easily, and the scooter has to move smoothly, and if it twitches, you need to recalibrate.
3. Test the brakes: accelerate to 5 km/h and smoothly press the brake lever. The scooter must stop without jerking.
4. Check recovery: release the gas at a speed of 10 km / h - the scooter should smoothly brake the engine.

Typical Beginner Mistakes:

• ❌ A sharp press on the gas - leads to a fall back.
• ❌ Braking only with the rear brake - blocks the wheel and can cause skidding.
• ❌ Driving on a fully discharged battery reduces the battery life.

- Maximum speeds (more than 25 km/h).

- Brakes are sharp.

- Driving through deep puddles or mud.

This will extend the life of the engine and battery.-->

Troubleshooting at the first start

If the scooter is unstable, here are the most common problems and solutions:

How to Reset Xiaomi Settings 1S factory-to-factory:

1. Turn off the scooter.
2. Press the power button and the button "+" simultaneously.
3. Hold for 10 seconds until the display blinks 3 times.
4. Release the buttons. The scooter will give a double signal, the reset is complete.

⚠️ Warning: Resetting erases all user settings, including mileage and settings in the Mi Home app. After reset, you will need to recalibrate and connect to your phone.

FAQ: Frequent Questions About Xiaomi’s First Launch 1S