Replacement of the strap on Xiaomi Mi Watch Lite: instructions with photos and tips

The Xiaomi Mi Watch Lite has become popular thanks to a combination of functionality and affordable price, but the standard silicone strap loses its appeal over time: stretch, get dirty or just get bored. Replacing the strap is one of the easiest procedures you can do yourself without going to the service center. However, even here there are nuances: from choosing a compatible model to properly removing the old strap without damaging the body.

In this article, we will look at all the steps of changing the strap, from tool preparation to fixing a new accessory, what types of mounts are used in the Mi Watch Lite, how to avoid common errors (such as damage to the latches), and what materials are better suited for everyday wear. And if you plan to experiment with design, we will tell you where to buy quality straps with a guarantee of compatibility.

Note: the procedure does not require special skills, but the models of 2020-2021 release uses a unique mount with side latches, which is different from the classic spring pins in mechanical watches. This means that the standard tools for replacing straps (for example, for the Apple Watch or Samsung Galaxy Watch) will not work here.

1.What straps are suitable for Xiaomi Mi Watch Lite?

Before buying a new strap, it is important to make sure it is compatible with your model. Xiaomi Mi Watch Lite (model number M2007J1SC) has a unique 18 mm wide mount with side latches that are fixed in the grooves of the case.

• ✅ Suitable straps with the marking "For Xiaomi Mi Watch Lite" or "18 mm with fast fast fast fast fastening".
• ✅ Compatible with the bands from Amazfit GTS (Some models and Huawei Watch GT 2e, But you need to check the photo fixing.
• ❌ Not suitable straps for Apple Watch, Samsung Galaxy Watch or classic watch with pins.
• ❌ Avoid straps 20mm or 22mm wide – they will hang or won’t fit into the grooves.

The manufacturer offers original straps in several colors (black, blue, pink, orange), but their range is limited. Alternatively, straps from third-party brands such as Barthel, V-MORO or UAG, which often offer more diverse materials:

When choosing, pay attention to the length of the strap: the standard version is suitable for the wrist 140-210 mm. If your wrist is thinner or wider, look for models with adjustment (for example, nylon with Velcro or metal with a lock).

Tools for strap replacement

You don't need any complicated devices to remove the old strap and install the new one, but some tools will make it much easier.

• 🔧 Plastic blade or mediator - for careful snapping of fasteners (metallic objects can scratch the body).
• 🔍 A magnifying glass or flashlight will help you see the mounting mechanism, especially if you are doing it for the first time.
• 🧴 Alcohol wipes - to clean the grooves of the case from dust and dirt before installing a new strap.
• ✂️ Scissors or cutters – only if the strap is fixed with pins (in the Mi Watch Lite is not used, but can be useful for other models).

If you are afraid of damaging the latches, you can buy a special key for Xiaomi straps (costs about 200-300). ₽ It's a plastic fork that you put in the groove and you carefully open the mounts.

⚠️ Attention! Do not use a knife or screwdriver to snap the strap, which can deform plastic latches or leave scratches on the watch body. If the mount does not lend itself, check if the grooves are clogged with dirt.

Before starting work, turn off the clock (press the button for 10 seconds) or put it into flight mode, which will prevent accidental pressing on the screen and resetting during manipulation.

💡

If you change your straps frequently, buy a set of plastic blades to repair your phones – they are thinner and more flexible than the mediators and won’t damage the case.

3. Step-by-step instruction: how to remove the old strap

The strap removal process on the Xiaomi Mi Watch Lite is different from the classic spring-pinned watch, which uses a fast fast fastening system where the strap is fixed by two side latches.

1. Place the watch on a flat surface with the screen down so as not to scratch the display.
2. Find a small lock button on the back of the strap (located at the base where the strap connects to the body) and press it towards the center of the clock before clicking.
3. Holding the lock, gently pull the strap away from the body. It should come out of the groove effortlessly. If it doesn't work, check if the button is fully pressed.
4. Repeat the action for the second side of the strap.

If the strap is not removed:

• 🔹 Check if the mechanism is not contaminated (wipe the grooves with an alcohol napkin).
• 🔹 Make sure you press the lock parallel to the body, not up or down.
• 🔹 Try to sway the strap slightly left-right without using force.

On some straps (especially non-original ones), the lock may be less noticeable, in which case use a plastic shoulder blade to gently tuck the strap on the side and find the button.

4. Installation of a new strap: nuances and errors

It's easier to install a strap than to remove it, but there are pitfalls here too, and the rule is that the straps must click, or the strap will fly over time.

1. Combine the slots of the new strap with the guides on the watch body. Make sure that the arrows on the strap (if any) look towards the screen.
2. Insert the strap into the groove to the point, then press it from top to bottom until you hear the snap of the lock.
3. Check the reliability of the mount by pulling the strap slightly over yourself, and if it doesn't move, it's done right.

Common errors in installation:

• ❌ Skewered strap -- if the grooves don't match, the lock won't snap. Correct position and try again.
• ❌ A weak click means that the lock button has not fully entered the groove. Press harder or check if the dirt is disturbing.
• ❌ Use of force: if the strap doesn't stand, don't push it. Better check the compatibility of the model again.

After installation, turn on the watch and check if the strap interferes with the sensors (for example, a heart rate sensor). If the watch has become less accurate to track the pulse, it may be too tightly tight or made of a material that blocks the signal (for example, metal).

5 How to care for a strap so it lasts longer

The life of the strap depends not only on the material, but also on the maintenance. Here are some tips to help maintain its appearance and functionality:

• 💧 Wash silicone straps with warm water and soap 1-2 times a week. Avoid aggressive detergents - they can make the material fragile.
• 🧼 Wash nylon straps by hand with a soft brush. Don't use the washing machine, it deforms the fabric.
• 👟 Rub the leather straps with a wet wipe and periodically apply a special skin cream!
• ⚡ Clean the metal straps with a toothbrush and paste. Use a polished napkin for shine.

If you exercise or sweat a lot, take off your watch and wipe the strap with an alcohol napkin, which will prevent bacteria from multiplying and odors. For silicone straps, you can use baking soda: apply a paste of soda and water, leave it for 10 minutes, then rinse.

⚠️ Attention! Do not dry the straps on the battery or in direct sunlight - this can lead to cracking of silicone or deformation of the skin. It is optimal to dry them at room temperature away from heat sources.

If the strap began to stretch (especially important for silicone models), you can try to "resuscitate" it with hot water:

1. Immerse the strap in boiling water for 1-2 minutes.
2. Take it out and let it cool (do not deform it in a hot state!).
3. After cooling, it will slightly shrink and last for several months.

6.Where to buy high-quality straps for Xiaomi Mi Watch Lite?

The original Xiaomi straps can be found in branded stores (for example, on the Mi Store or AliExpress in official sellers), but their range is limited.

When buying, pay attention to:

• 📏 The exact name of the model should be indicated by the description “Xiaomi Mi Watch Lite” or "M2007J1SC".
• 📸 Photo of the mount -- compare it to your strap. On non-original models, the latches may differ.
• ⭐ Customer reviews – especially pay attention to the comments about the reliability of fixation.

If you want to save money, look for lots marked "2 in 1" or "2 strap set" - often cheaper than buying individually, and also watch for sales on AliExpress (for example, during Black Friday or 11.11).

💡

Before buying a strap, be sure to check its width (18 mm for the Mi Watch Lite) and the type of attachment. Even visually similar straps may not fit due to the difference in the fixing mechanism.

FAQ: Frequent questions about changing the strap