How to connect headphones Xiaomi Earbuds: a step-by-step guide

Xiaomi’s modern wireless headsets are deservedly popular for their excellent price-to-sound balance. However, the initial setup process may raise questions for those who are first encountering the brand’s ecosystem. Proper pairing is the foundation for a stable Bluetooth connection in the future.

In this article, we will take a look at all the steps of connection, from removing headphones from the case to solving common problems. You will learn how to activate detection mode and what to do if the device does not see the headset.

Preparation of headphones and smartphone for work

Before you start, make sure both devices are ready to interact, charge the case with the headphones at least 30-40% so that during the setup they do not suddenly turn off, which is critical, since discharging at the time of updating the configuration can lead to failures.

On your smartphone, you need to activate the wireless module. To do this, lower the notification curtain and click on the Bluetooth icon or go to the system settings. Make sure that geolocation (GPS) is enabled, since in modern versions of Android this requirement is necessary for correct peripheral scanning.

⚠️ Warning: If the phone is on Airplane mode, the wireless interfaces will not work.

It's also worth checking if one of the headphones is connected to the other device automatically.The background connection can interfere with the new pairing, so it's best to temporarily disable Bluetooth on a tablet or laptop if they've been previously used with this headset.

Step-by-step instructions for the first pairing

The connection process is almost identical to most models, whether Redmi Buds, Mi True Wireless or Xiaomi Earbuds. First, remove both headphones from the charger case. On many models, the indicators on the devices themselves or on the case will flash white, signaling readiness.

Open the Bluetooth menu on your smartphone and start searching for new devices. Your model name should appear on the list of available gadgets. Click on it to initiate the procedure. If the system requests a pairing confirmation, agree with it.

In some cases, manual activation of the mode (pairing) is required, touch the touch area of both headphones at the same time and hold for a few seconds until the indicator flashes at a different frequency, which moves the gadget into visibility mode forcibly.

After a successful connection, the phone's status bar will have a headphone battery icon, and the device list will have the words "Connected," and you can enjoy music or make calls.

Using the Xiaomi Earbuds app to customize

To unlock the full potential of the headset, it is recommended to install the official Xiaomi Earbuds or Mi Wear app (depending on the model and region), these utilities allow you not only to track the charge, but also to configure equalizer, touch control and noise reduction modes.

Download the app from the Google Play Store or App Store. Once launched, it will suggest adding a new device. Follow the on-screen instructions: the app will find your headphones if they are nearby and Bluetooth is active.

The app also resets headphones to factory if standard methods don't work, a powerful tool for diagnosing and fine-tuning the headset's behavior to your preferences.

💡

Check firmware updates in the app regularly – they often improve connection stability and noise reduction quality.

Features of connecting to iPhone and iOS

Owners of Apple technology may face nuances, because the iOS ecosystem has its limitations. Despite this, connecting Xiaomi Earbuds to an iPhone is quite simple, the process is similar to connecting any other Bluetooth headset.

Go to Settings → Bluetooth on your iPhone. Make sure the slider is active. Remove the headphones from the case and wait for their name to appear in the list of "Other devices." Click on the name to pair.

It’s worth noting that some features, such as a charge animation pop-up or detailed touch control settings through a native app, may not be available or work with limitations on iOS.

⚠️ Note: If the iPhone doesn’t see the headphones, try Forget the Device in the Bluetooth list and repeat the pairing procedure again.

For full management on the iPhone, you sometimes have to use third-party apps from the App Store, which emulate the functionality of the official Android utility. This allows you to change the settings of the equalizer and modes of operation.

Problem Solving: Headphones are not connected

It's not uncommon for one of the ears to be disconnected or for communication to be interrupted, often because the left and right channels are out of sync, and to fix this, you have to do a full reset.

Put the headphones in the case and leave the lid open. Find the function button on the case case case (usually located on the end or inside between the seats). Press it for 10-15 seconds until the indicator lights up in orange or flashes quickly.

Discharge procedure:


1. Put it in the case.




2. Press the 15 sec button.




3. Wait for the indicator to flash.




4. Remove the phone from the Bluetooth list.




5. Reconnect.

After reset, remove the device from the list of stored devices in the phone (“Forget the device”) and pair as the first time. This action clears the internal memory of the headset from configuration errors.

If the problem persists, check the charge of contacts in the case. Dirt or oxidation can prevent charging of one of the headphones, which does not turn on and does not go into pairing mode. Wipe the contacts with dry soft cloth.

Connection to a computer and other gadgets

Connecting to a PC or laptop requires a Bluetooth module. If your computer does not have an integrated module, you will need an external one. USB-Adapter. In the Windows operating system. 10/11 Go to the settings. → Devices → Bluetooth.

Activate your search and select your Xiaomi Earbuds from the list. Drivers are usually set up automatically. For macOS, the process is similar: system settings → Bluetooth. Computers often remember the device, so reconnecting is instantaneous.

When used with a TV or Smart TV, the algorithm is the same: turn on the search mode on the TV, put the headphones in pairing mode and select them from the list. The sound quality may depend on the codecs supported (AAC, SBC, aptX).

It is better to disable Bluetooth on unused gadgets for stability.

Frequently Asked Questions (FAQ)

💡

The key to a successful connection is to have clean contacts in the case and properly reset via the button press if the automatic pairing does not work.

Now you know how to plug Xiaomi Earbuds headphones into any device, and following these guidelines will ensure stable performance and high sound quality. Remember to update your firmware periodically through the app for new features.