Xiaomi smartwatches are some of the most popular wearables on the market, but even power users sometimes have trouble adjusting time. The problem can be different: the watch shows the wrong time, does not sync with the phone or resets after an update. In this article, we will analyze all possible ways to set time on different models, from the budget Mi Band to the flagship Xiaomi Watch, and also consider typical errors and their solutions.
It's important to understand that the setup process depends on the device model, the firmware version, and even the regional settings of the smartphone. Some watches automatically tighten time from the Internet, others require manual adjustments. We'll go into each method in detail so you can choose the best option for your situation.
Why does Xiaomi watch show the wrong time?
Before you start setting up, you should understand the causes of the failure, most often the problem lies in one of the following factors:
- 📱 Lack of sync with smartphone – if communication between devices is broken, the watch can use internal data that over time “go away” from real time.
- 🌍 Wrong time zone – even when synchronized, the device may be targeting the wrong region, especially if you’ve recently traveled.
- 🔄 Failure after firmware updates – some versions of the software contain bugs that affect the operation of the system clock.
- 🔋 Battery discharge – at a critical charge level, the device can reset settings, including date and time.
Most of the time, the problem is solved by simple resynchronization, but sometimes deeper intervention is required. For example, owners of the Amazfit GTR 4 often find that the clock is “backlogged” by 1-2 hours due to an error in the automatic adjustment algorithm.
Method 1: Automatic time synchronization through the application
The simplest and most recommended method is to allow the watch to automatically receive time data from a connected smartphone, which works for all modern models, including the Mi Band 7 Pro, Xiaomi Watch S2 and Amazfit Bip 5.
- Make sure that the smartphone is on: 📶 Mobile Internet or Wi-Fi 📍 Geolocation (to determine the time zone) 🔄 Automatic date and time (in phone settings)
- Mi Band – Mi Fitness (formerly Mi Fit)
- Xiaomi Watch and Amazfit – Zepp Life (formerly Amazfit)
- Go to Device Profile → Settings → Date and time.
- Activate the option to sync time with your phone (or similar).
- Save the changes and restart the clock (press the power button for 10 seconds).
The Amazfit Bip U Pro and similar models may require a dedicated Amazfit Toolbox application (available on 4PDA) to manually configure, as standard software limits this feature.
What if there is no manual setting option in the menu?
Features of setting time on popular models
Each line of Xiaomi smartwatches has its own nuances in time management, and we have collected key differences in the table:
| Model | Autosynchronization | Manual setting | Frequent problems |
|---|---|---|---|
| Mi Band 5/6/7 | Yes (via Mi Fitness) | No (only through the engineering menu) | Resetting time after update |
| Xiaomi Watch S1/S2 | Yes (via Zepp Life) | Yeah (in clock settings) | Freeze during synchronization |
| Amazfit GTR 4 | Yes (via Zepp) | Yes (with limitations) | 1-2 hours backlog |
| Redmi Watch 2/3 | Yes (via Mi Fitness) | Partially (date only) | Wrong time zone |
For the Xiaomi Watch S2 and Amazfit GTR 4, there is an additional GPS synchronization feature that allows you to adjust time on satellite signals, which is useful for travelers, as it automatically updates the time zone when crossing borders.
💡
On the clock with AMOLED-screen (for example, Xiaomi Watch) S1 Pro) time may be lost due to energy saving mode. Turn off the "Screen is always on" option in the display settings if you encounter persistent failures.
Problem Solving: The clock doesn't sync or reset
If automatic synchronization doesn’t work and manual tuning doesn’t help, try the following steps:
⚠️ Attention: Before resetting your watch settings, back up your data in the application (Section Profile) → Backups: This will save your activity statistics, alarm settings and other personal data.
- 🔄 Reconnect the watch to your phone: Forget the device in your smartphone's Bluetooth settings. Remove the watch from the app (Profile) → Remove the device. Perform a new binding through QR-code.
Update the firmware:
Outdated software often causes malfunctions. Check for updates in the Device Profile → Software Update section.
Reset the clock settings:
On most models, this is done through Settings → System → Reset. After reset, you will need to re-synchronize.
Check the regional settings of the phone:
Sometimes the problem lies in the wrong region of the smartphone. Go to Settings of the phone → Additional → Language and region and select your country.
If none of these methods worked, the problem could be hardware, for example, on the Mi Band 4, there's a bug with an RTC chip that causes constant failures, and you just have to go to the service center.
Additional Tips for Precise Hours Operation
To minimize the risk of time disruption, follow these guidelines:
- 🔋 Watch the battery charge: at a level below 10% The clock may lose settings. Charge the device at least once in a while. 3-4 day-day.
- 📡 Regularly update the software: the manufacturer often fixes synchronization bugs in new firmware versions.
- ⏱️ Use alternative apps: For older models (for example, Mi Band 2) Notify & Fitness or Tools & Mi Band will suit – they offer advanced time settings.
- 🌐 Set up a backup. NTP-server: on some firmware (e.g., Zepp) OS) You can manually specify the time server for more accurate synchronization.
If the problem persists, try manually setting the Moscow time (UTC+3) without automatic adjustment.