How to turn off Xiaomi Mi Band: full instructions

Xiaomi fitness bracelet users often face a situation where you need to completely turn off the device, which may be necessary to reboot the system when the interface freezes, to save charge during long-term storage of the gadget or before sending it to service. However, unlike smartphones, there is no usual power button that you can hold to turn off.

The procedure for turning off the tracker depends on the specific model of your device and the version of the installed software. In early versions of firmware, the option may have been absent at all, requiring a complete discharge of the battery, while modern models of the Mi Band and Smart Band have a full menu of power management. Understanding the correct algorithm of actions will help to avoid unnecessary stress and potential errors when working with the device.

In this guide, we will take a look at how to turn off a smart wristband through the Mi Fitness app (formerly Zepp Life) or directly through the device’s menu, and we will look at the nuances for different generations of trackers and answer frequent questions that arise when using wearable electronics from the Chinese giant.

Features of nutrition management in different models

The evolution of the Mi Band line has led to different interfaces and logics. If you own a Mi Band 2 or Mi Band 3, you may not have a regular shutdown feature on the menu. In these devices, developers have relied on maximum autonomy and minimalism, leaving the user only standby.

Since the Mi Band 4, and especially the Mi Band 5, 6, 7 and 8, that has changed. AMOLED-In addition, the user can now initiate the process of completion through the settings on the wristband screen, and more complex operating systems have required the introduction of a full control menu.

It is important to understand that software reset and complete shutdown are different processes: reboot is necessary to clean RAM and eliminate minor software failures, while turning off completely turns off the device. For models with touch control (starting with version 4), the procedure has become intuitive, but requires accurate touches on the display.

• 🔋 Models without screen (Mi Band 1, 1S) They do not have a shutdown function and work until discharge.
• 📱 Monochrome screen devices (Mi Band 2, 3) often require discharging or flashing to completely shut down.
• ⌚ Modern Trackers (Mi Band) 4-8) have a built-in "Switch off" menu in the settings.
• 🔄 Reboot is available in almost all current models through the settings menu.

The hardware differences are also dictated by the way we interact, and if the old versions had a LED light and a vibrator as their only interface, the new models are full-fledged mini-smartphones on the wrist, which leaves an imprint on how we manage energy savings.

How to turn off Mi Band from the menu on the device

For current models like the Mi Smart Band 6, 7, 8 and their NFC versions, the easiest way is to use an integrated interface. You don't need a smartphone at hand, just a charged device is enough. This method is a standard and recommended by the manufacturer for a planned shutdown.

To do this, unlock the bracelet screen with a swipe or touch button. Then scroll through the main menu before searching for the Settings icon (usually a gear), inside this section, you need to find the item responsible for system functions. Depending on the firmware version, it can be called System, General or immediately Shutdown.

⚠️ Warning: Once the switch is selected, the device may request confirmation of the action. Do not interrupt the process until the screen is completely turned off.

In some versions of the software, the path may be slightly different, for example, in the Mi Band 7 you need to go to Settings → System → Shutdown. In earlier models, such as the Mi Band 4, this item can be hidden in the submenu or require prolonged pressing on a certain area of the screen, although the fourth model is characterized by the lack of an explicit off button in some firmware revisions.

If you can't find the switch off menu, your version of the software may be outdated.Firmware updates through the app often add new controls, including an improved power menu.Check for updates in the paired app.

It's worth noting that the shutdown process takes a few seconds, and at this point, the Xiaomi logo or the fad animation can be displayed on the screen, so don't try to use the sensor actively at this point so as not to bring down the command.

Use of Mi Fitness and Zepp Life

Many users search for the off button directly in the Mi Fitness mobile application interface (or Zepp Life for older models). However, the application functionality is focused primarily on synchronizing data and setting parameters, rather than direct control of hardware power.

However, you can reset or reconnect through the app, which indirectly affects the device. If the bracelet is stuck and does not respond to touch, sometimes removing the device from the Bluetooth list in the phone settings, and then re-pairing it, and this does not turn off the tracker physically, but restarts the communication module.

For deep customization and diagnosis, you can use third-party tools such as Notify for Mi Band or Tools & Mi. These applications available on Google Play often have advanced management functions, including hidden menu commands. However, using third-party software always carries risks, and the manufacturer is not responsible for the stability of work after such interventions.

• 📲 Official apps (Mi Fitness, Zepp Life) do not have a direct button to turn off".
• 🔗 Unbinding the device in the Bluetooth menu of the phone helps with hanging communications.
• 🛠 Third-party apps may have hidden power management features.
• 🔄 Resetting settings through the app can initiate a tracker reboot.

The main function of the application in the power context is to monitor the battery charge, and this is where you see the percentage of charge, and if the charge level drops below 10 percent, the system will start recommending that you put the device on charge, and at 0 percent, you will automatically shut down.

What to do if the bracelet is frozen and does not respond

When the touch screen stops responding to touch and the image freezes, it's not common, but it requires immediate intervention, in which case it's impossible to shut down the menu, and the first step is to try software reboot if the device is responsive.

For touch-controlled models (starting with the Mi Band 4), there is a hidden or explicit Reboot item in the settings menu. If the menu is not available, try putting the bracelet on the charger. Connecting to the power supply often causes the power controller to reset hardware, which can "revive" the getting stuck system.

If the charging connection doesn't work, you can use the "deep discharge" method. Leave the bracelet on until it's completely discharged and turned off itself. Then put it on charge. In 90% of cases, after a full discharge-charge cycle, the device starts working correctly.

⚠️ Warning: Do not attempt to open the case or short the contacts of the battery yourself.This will lead to loss of warranty and possible damage to the battery.

In rare cases, hard resets through the app help. In Zepp Life, you can try to find the option "Unlink" or "Factory Reset" if the bracelet at least intermittently connects to the phone, which will delete all data and return factory settings, which often solves software conflicts.

For owners of the Mi Band 8 and newer, where magnetic charging is used, make sure the contacts are clean. Contact oxidation can simulate freezing, as the device does not receive control signals.

Comparison of methods of disabling different versions

Different generations of trackers have unique controls, and to make it easier for you to navigate, we've developed a comparative table of shutdown methods for popular models, which will help you quickly determine which action algorithm applies to your gadget.

As you can see from the table, with each new model, the controls become more flexible. If you have a Mi Band 3, don't look for the off button, it's not physically there. If you have a Mi Band 7, ignoring the off point on the menu can lead to inconvenience in transportation.

It is important to note that the availability of a menu item may depend not only on the model, but also on the regional version of the firmware (CN - Chinese, Global - global). Global versions are usually more user friendly and contain a full set of management functions.

Frequent questions and problems when turning off

In the process of operation, users face a number of typical questions related to power consumption and device management. One of the most common is: "Why does the bracelet turn off itself?", most often this indicates a degradation of the battery or a failure in the calibration of the battery. If the device is less than a year, this can be a warranty case.

Another issue is data security.Do I need to turn off the bracelet before upgrading? Usually, a firmware update requires a restart, but not a complete shutdown. The device will restart itself in update mode. Forced shutdown in the middle of the firmware process can lead to a "bricking" of the gadget.

⚠️ Warning: Never interrupt the firmware update process by turning off the bracelet or moving away from your phone.

And users are also concerned about the effects of cold, and at temperatures below -10°C, lithium polymer batteries can temporarily lose capacity and make a mistake or shut down, which is a normal physical reaction, and the device will restore its heat.

• ❄️ In the cold, the bracelet can be turned off to protect the battery.
• 🔄 Update is better to carry out at a charge of more than 50%.
• 📉 Unauthorized shutdown of the old device - a sign of wear of the battery.
• 💧 Water protection does not mean the ability to control wet hands (touchscreen hangs).

If your bracelet stops turning on after a long period of storage, don't throw it away. Leave it on charge for a few hours. Deep discharge takes time to "rock" the chemical processes in the battery before turning on the screen.

💡

If the bracelet has been discharged for a long time, put it on charge for 3-4 hours, even if the screen does not light up immediately.

Storage and maintenance recommendations

If you plan to not use the tracker for a long time, the right solution is to turn it off. Storing a device on with a Bluetooth module running will lead to a deep discharge, which is harmful to battery chemistry. The optimal charge level for storage is about 50-60%.

Periodically, every 2-3 months, check the battery status. Even when it's off, it self-discharges. If the charge level has dropped to a minimum, recharge the device to the recommended level, which will extend the battery life for years.

Keep the device dry, at room temperature, and avoid direct sunlight on the screen, as UV radiation can damage the matrix and plastic body, and you should not put heavy objects on the tracker, so as not to damage the sensor.

💡

Proper storage of a device turned off with a charge of 50-60% significantly prolongs the life of the battery and prevents it from bloating.

Compliance with these simple rules will allow your Xiaomi Mi Band to remain a reliable assistant in tracking activity and health throughout its life.Remember that electronics love moderation and regular maintenance.