Xiaomi fitness bracelets have become an integral part of the daily lives of millions of users, but even such simple devices sometimes require a reboot or a complete shutdown. Perhaps you want to save battery power before long storage, eliminate a software failure, or simply temporarily disable the device from syncing. Unlike smartphones, where the power button is always at hand, the Mi Band and Smart Band bracelets hide this feature in the depths of the menu - or do not have it at all.
In this article, we’ll break down all possible ways to turn off models from Mi Band 1 to Mi Band 8, as well as the Xiaomi Watch and Smart Band Pro lineup. You will learn how to do without a physical button on new devices, what to do if the bracelet freezes and does not respond to touch, and how to avoid accidental data reset when you turn off. AMOLED-screens where the process is different from devices with E-Ink displays.
1. Standard shutdown via menu (for touch screen models)
Most modern Xiaomi bracelets, from Mi Band 4 to Mi Band 8, are equipped with touch screens, which makes it easier to access settings. However, the path to the shutdown function is not always obvious.
- 🔹 Swipe your finger up the screen (on some models, to the right) to open the main menu.
- 🔧 Find the icon. ⚙️ Settings (usually at the bottom of the list) and tap it.
- 🔄 Scroll down to Turn off (in English firmware - Shut down or Power off).
- ✅ Confirm the action by holding the screen for 3-5 seconds (some models will require a swipe to the right).
On the Mi Band 7/8 and Smart Band Pro, the path can be: instead of a confirmation slider, a countdown timer (10 seconds) will appear, which can be canceled by touching. This is done to protect against accidental pressing. If the bracelet is synchronized with the Zepp Life application, it is recommended to turn off notifications in the smartphone settings before turning off to avoid conflicts on the next turn on.
Turn off the Bluetooth bracelet in your phone settings
Sync the latest data in the Mi Fit/Zepp Life app
Charge the device to at least 20% (for models with AMOLED)
Make sure there are no active notifications on the screen.-->
Important: On the Mi Band 6 and older, the screen may flash red after turning off, which is normal and indicates that the OS is shutting down correctly. If the indicator is lit in green or blue, it is a signal of unfinished processes (for example, unsaved training data).
2. Turn off via physical button (Mi Band 1-3 and Watch)
Older Mi Band 1-3 models, as well as some versions of Xiaomi Watch, are equipped with a physical button that performs several functions depending on the duration of the press.
- Press and hold the button for 8-10 seconds (on Mi Band 1 until vibration).
- On the screen (if any) will appear the inscription Power off or the icon off.
- Release the button and confirm the action with a short press (on Mi Band 2/3) or a re-hold (on the Watch).
The Xiaomi Watch S1 and Watch Color process is similar, but instead of a button, it uses holding the touch area under the screen (marked by a dot).If the bracelet does not respond, try plugging it into charging for 5 minutes - sometimes a discharged battery blocks the shutdown.
⚠️ Note: On the Mi Band 1 (first generation), there is no full shutdown function - the device can only restart or wait for the battery to discharge.
3. Forced shutdown when getting stuck
If Xiaomi’s bracelet is no longer responsive to touch, the screen is frozen or displays an error, a forced reboot will be required, which works for all models, but on devices with AMOLED (such as the Mi Band 7 Pro) can lead to loss of unsaved data.
| Model bracelet | Forced shutdown method | Retention time | Effects of consequences |
|---|---|---|---|
| Mi Band 1–3 | Hold the physical button | 15-20 seconds | Resetting Bluetooth connections |
| Mi Band 4–6 | Connect to charging + hold the touch button | 10 seconds. | Possible reset of steps in a day |
| Mi Band 7/8, Smart Band Pro | Hold the touch area under the screen | 20+ seconds | Loss of sleep/training data |
| Xiaomi Watch (all models) | Button + touch area simultaneously | 12 seconds | Resetting notification settings |
For the Mi Band 4 and later, there is an alternative way: place the bracelet on the charger, then quickly touch the screen 5 times (with intervals of less than 1 second) This will trigger a recovery menu where you can choose Reboot or Shutdown.
What if the bracelet is not turned on after forced shutdown?
4.Switch off via Mi Fit/Zepp Life app
Few people know, but the official Mi Fit and Zepp Life apps allow you to remotely control the power of the bracelet, provided it is connected via Bluetooth, a feature not available for all models, but works on the Mi Band 5-8 and Smart Band Pro.
Instructions for Zepp Life (relevant for firmware 2023-2026):
- Open the app and go to Profile → Your device.
- Slap the icon. ⋮ (three points) in upper right corner.
- Select Device Management → Turn it off.
- Confirm the action in the pop-up window.
In Mi Fit, the path is different: Profile → Device settings → Additional → Turn off. Some regional versions of the app may not have this item – in this case, use an alternative method through the bracelet menu (section 1).
⚠️ Note: Remote shutdown via the application does not work if the bracelet is discharged below 10% or is in power saving mode. Also, the function can be blocked after updating the firmware - check the version of the software in Settings. → About the device.
5. factory reset (alternative to shutdown)
If your goal is not just to turn off the bracelet, but to completely reset it (for example, before selling), then instead of turning off the power, it makes more sense to reset, which will delete all data, including the link to the Xiaomi account, but will keep the device working.
For most models, the process looks like this:
- Go to Settings → About the device → Reset settings.
- Confirm the action (it may be necessary to enter) PIN-code, if it is installed).
- Wait for the reboot (the bracelet vibrates and displays the Mi logo).
On Mi Band 1-3, the reset is performed differently:
1. Disable the bracelet from the Mi Fit app.
2 Hold the button for 20 seconds until double vibration.
3. Connect to charging - the device will automatically reset.After resetting, the bracelet will be in a “out of the box” state and will require re-tuning.
💡
If you reset the bracelet before selling, be sure to untie it from your Xiaomi account in the app (Profile → Delete the device).
6. Features of the off for specific models
Despite the general principles, each Xiaomi model has nuances, and the key differences for the popular wristbands are:
- 📱 Mi Band 8: Supports voice shutdown via Xiao AI (For Chinese firmware only. Commands: (off) or (reset).
- 🖥️ Smart Band 7 Pro: Has a developer mode where you can configure automatic timer shutdown (path: Settings) → System system → For developers).
- ⚡ Mi Band 4 NFC: When switched off through the menu, the module is also switched off. NFC — Re-activation will require a reboot.
- 🔋 Xiaomi Watch S1 Active: Supports fast shutdown by double pressing the physical button (function enabled in settings).
On the Mi Band 6 and later after turning off the screen can remain active for several seconds - it is not a failure, but a feature of the work. AMOLED-If the bracelet does not respond to activation after turning off, try holding it in the sun for 10 minutes (sometimes this resets the display controller).
Mi Band 1–3
Mi Band 4–5
Mi Band 6–7
Mi Band 8 / Smart Band Pro
Xiaomi Watch (any model)
Another model.-->
7. Frequent mistakes and how to avoid them
Even in a simple process like turning off the wristband, users make mistakes that lead to data loss or breakdowns.
- 🚫 Shutting down during synchronization: If the bracelet transmits data to Mi Fit, a forced shutdown can damage the training logs.Always wait for the synchronization to be completed (the cloud icon must disappear).
- 🔌 Remove from charging immediately after switching off: On the Mi Band 7/8 This can cause the battery controller to fail. It's recommended that you keep the bracelet on charge for more. 1–2 minutes after.
- ❄️ Shutting off at low temperature: If the bracelet was in the cold, before turning off, let it heat up to room temperature (otherwise errors are possible). EEPROM).
- 🔄 Frequent reboots: Regularly turning off/on (more often than 1 time per week) accelerates the wear and tear of the flash memory where data is stored.
Another common problem is that the bracelet turns on spontaneously after turning off, and this is due to the automatic wake-up function when driving (configured in Settings → Screen → Raise for Activation). To avoid this, deactivate this option before turning off.
💡
If the bracelet does not turn on after turning off, in 90% of cases the problem is solved by connecting to charging for 15+ minutes. Only if the indicator does not burn at all, you should suspect a hardware malfunction.