How to completely turn off Xiaomi Mi Band 5: all working ways

Why do users want to disable Mi Band 5 and when do they need to?

The Xiaomi Mi Band 5 fitness bracelet has become one of the most popular activity-tracking gadgets due to its combination of price and functionality. However, even such a simple device has situations where it needs to be completely turned off - not just put to sleep, but turn off. The main reason is: saving battery power during long-term storage (for example, if you buy a spare bracelet or go on a trip without recharging).

The second common situation is software failures: If the bracelet starts to glitches (not synced with the phone, does not respond to touch, shows incorrect data), a complete power outage often helps to “reboot” the system, and a shutdown is required before updating the firmware manually or when resetting to factory settings, in which case the gadget must be turned off.

It's important to understand the difference between turning off and going to sleep. In sleep mode, the bracelet continues to consume energy simply by turning off the screen and notifications. Shutting down completely disrupts all processes, which is especially critical if you plan to not use the device for more than a week.

Method 1: Turn off via the bracelet menu (official method)

The most reliable and recommended way by the manufacturer is to use the built-in Mi Band 5 menu, which works on any firmware and does not require a smartphone connection.

1. Wake up the bracelet screen by touching the touch button or raising your hand (if Raise to Wake is enabled).
2. Flick the menu to the right until you find the item More (it is indicated by three dots).
3. In the list that opens, select Settings (cog icon).
4. Scroll down to the Turn off (power icon) item and tap on it.
5. Confirm the action by selecting Yes on the screen.

The bracelet will start the shutdown process, which takes about 5-7 seconds, the screen will go out, and the vibrating motor will briefly vibrate, signaling that the screen does not respond to touch, try pressing harder or clearing the sensor of moisture / dirt.

Make sure the battery is charged >10%|Synchronize data with Mi Fit|Close all active training|Turn off the bracelet from charging (if connected)-->

⚠️ Note: If the menu does not include the "Stop" option, you have an outdated firmware installed on your bracelet. Update it via the Mi Fit or Zepp Life app (instruction below).

Method 2: Forced button shutdown (if the bracelet is getting stuck)

Sometimes the Mi Band 5 will not respond to touch due to software failure or mechanical damage to the screen, in which case the hardware shutdown using a physical button will help. On the Mi Band 5 model, it is hidden under the touchpad, but is available through a special combination:

Algorithm of action:

1. Remove the bracelet from your hand and place it on a flat surface with the screen up.
2. Press the touch button (the area under the screen) for 10-15 seconds until you feel the vibration.
3. Do not release the button for 5 seconds after the vibration, this will ensure a complete shutdown.

If the bracelet is not vibrating, try plugging it into charging for 1-2 minutes and then repeating the procedure. This helps wake up the power controller. Forced shutdown resets all temporary settings (such as alarm clocks), but does not delete activity data.

Method 3: Turn off via Mi Fit or Zepp Life

Xiaomi’s official apps allow you to control the bracelet remotely, including turning it off, which is convenient if the sensor is unstable, but the connection to the smartphone is saved.

Step-by-step action:

1. Open the app and wait for sync with the bracelet (the bracelet icon at the top of the screen should be active).
2. Go to the Profile section → Mi Smart Band 5.
3. Select Additional Settings (or Device Management in Zepp Life).
4. Scroll down and tap on the item Turn off the bracelet.
5. Confirm the action in the dialog window.

After sending the command, the bracelet vibrates and starts the shutdown process. If the command is not executed, check:

• 📶 Bluetooth status: is it on the phone and is the bracelet connected.
• 🔄 Application version: Update Mi Fit/Zepp Life to the latest version.
• 📱 Permissions: Give the application access to notifications and location (required for stable communication).

Through the bracelet menu |Back (forced)|Through the Mi Fit/Zepp Life |Never turn off |Another way-->

What to do if the bracelet does not turn off: diagnosis of problems

If none of these methods worked, the problem could be a hardware or software malfunction.

If the bracelet does not show signs of life (does not vibrate, does not charge), try the following:

1. Connect to charging for 1-2 hours using the original cable.
2. Try to press the button for 20-30 seconds (sometimes it helps with a deep discharge).
3. If nothing works, it could be a battery failure or a motherboard failure, and that's when you need repairs.

💡

Before contacting the service, try to "wake up" the bracelet by holding it on charge in the refrigerator (in the package!) for 10-15 minutes, sometimes this helps with overheating of the power controller.

How to turn Mi Band 5 on after switching off

Turning on the bracelet after a complete shutdown takes longer than a normal exit from sleep mode.

1. Connect the bracelet to the charger (optional, but speeds up the process).
2. Press the touch button for 3-5 seconds until the Mi logo appears.
3. Release the button and wait for the download (about 20-30 seconds).
4. If the screen does not turn on, try again, holding the button for up to 10 seconds.

Once turned on, the bracelet automatically syncs with the phone (if Bluetooth is on).

• 🔄 Restart the Mi app Fit/Zepp Life.
• 📱 In your phone settings, forget your Mi Band 5 device and plug it back in.
• 🔋 Make sure the battery charge is on the bracelet >20% (at low charge, synchronization may not work).

⚠️ Warning: If the bracelet requires re-attachment to the account after activation, it means that the settings have been reset, restore data from the backup in the application or configure the device again.

Power saving tips: when to turn off the bracelet, and when sleep mode is enough

Many users turn off the Mi Band 5 too often, not realizing that Sleep Mode often does as well as the task of saving power.

• ⏳ Short-term simple (1-3 days): Use sleep mode. Minimum energy consumption (~1-2% a day).
• 📦 Long-term storage (weeks or more): Turn off the bracelet completely to avoid deep discharge.
• ⚡ Low charge (<10%): Turn off the bracelet and charge as soon as possible, and storing it with a discharged battery shortens its lifespan.
• 🔄 Update: Turn off and turn on the bracelet only if the instruction requires it (usually the update is carried out without turning off).

To maximize the life of the battery:

• 🔋 Avoid full discharge (charge at 10-20%).
• ☀️ Do not leave the bracelet in the sun or in a hot place (optimal storage temperature: 10–30)°C).
• 📵 Turn off unnecessary notifications (they waste charge on vibration and screen lighting).

💡

Turning off the bracelet every 1-2 months for 10-15 minutes helps to “reset” the cache of the system and prevent minor glitches.

FAQ: Frequent questions about turning off Xiaomi Mi Band 5