How to Turn Off Xiaomi Mi Band 2 Fitness Bracelet 2: All Working Ways

Xiaomi Mi Band 2 is one of the most popular fitness bracelets, but its interface is not always intuitive. Many users face the problem: how to turn off the device completely if there is no explicit “Switch off” option on the menu? Unlike smartphones, where the power button solves everything, it requires knowledge of hidden combinations or features of the firmware.

In this article, we’ll look at all the possible ways to shut down, from standard to emergency, including resetting to factory settings and forced discharging, and why the bracelet may not respond to commands, and how to avoid the typical bugs that lead to the “bricking” of the gadget: If your Mi Band 2 is getting stuck, out of sync, or just need to save charge, here’s the solution.

Why is there no “Switch off” button in Mi Band 2?

Xiaomi designers originally put the concept of minimalist energy saving in the Mi Band 2. The bracelet is designed for 20+ days of battery life, so a complete shutdown is not provided as a standard function. Instead, the device goes to sleep when inactive, consuming minimal charge.

However, there are several scenarios where shutdown is necessary:

• 🔋 Long-term storage (for example, if you do not plan to use the bracelet for several months).
• 🔄 Resetting settings before selling or transferring to another user.
• 🐢 System freeze (bracelet does not respond to touch, does not synchronize).
• ⚡ Emergency charge savings (for example, if you need to “preserve” the last percentage of the battery).

It is important to understand: complete disconnection ≠ Reboot: Reboot just restarts the system, and shutdown completely shuts down the device. In Mi Band 2, these processes are implemented in different ways.

Method 1: Shutting down via hidden menu (official method)

The safest way is to use a hidden combination that emulates a complete shutdown.

1. Check that the bracelet is not connected to the charger.
2. Press and hold the touch button under the screen for 10-12 seconds.
3. Wait until the Mi logo appears on the screen and the bracelet vibrates three times.

If the screen is out, but the bracelet continues to vibrate when touched, it means that it has reset, not turned off. Repeat the procedure by holding the button longer.

Disconnect the bracelet from the charger

Make sure the charge level is above 5%

Press and hold the button for exactly 10 seconds.

Wait for the triple vibration and the Mi logo-->

⚠️ Note: If the bracelet is discharged to 0%, it may not react to hold the button. In this case, use the forced discharge method (see Method 4).

Method 2: Software reset to factory settings

If the bracelet does not turn off via the menu or you want to completely clear the data before selling, do a reset:

1. Open the Mi Fit app on your smartphone.

Once reset, the device will automatically turn off and be ready for a new binding, which also helps if the bracelet is stuck on the logo or not synchronizing.

If the reset via the application does not work (for example, due to a connection error), use a hardware reset:

1. Disconnect the bracelet from your phone in Bluetooth settings.
2. Press the touch button 5 times in a row at 1 second interval.
3. After the fifth press, hold the button for 5 seconds until you feel the vibration.

Method 3: Shutting down through battery discharge

If the bracelet doesn't respond to any commands, you can force the battery to discharge, which works 99 percent of the time, but takes time.

Instructions:

1. Disconnect the bracelet from the charger.
2. Activate maximum loading: 🔦 Turn on the screen light for 10 seconds (touch the button). 📊 Start continuous pulse measurement (in the bracelet menu). 🔔 Enable all notifications (vibration consumes charge).

12-24 hours

switch on

⚠️ Warning: Do not use heat or mechanical action to accelerate the discharge. This can damage the battery or display. Also do not leave the bracelet to discharge in direct sunlight - overheating reduces the battery life.

Method 4: Emergency shutdown via charging contacts

If the bracelet is completely frozen and does not respond to the sensor, you can try forced shutdown through charging contacts, which is a risky method, but sometimes the only one possible.

You'll need:

• 🔌 Charging cable from Mi Band 2.
• 📌 paperclip.

Steps:

1. Unplug the bracelet from the strap to access the contacts.
2. Insert the bracelet into the charger not completely - only before the first click.
3. Close the two extreme contacts (not the central ones!) carefully with a paper clip for 3-5 seconds.
4. The bracelet should be turned off without vibration.

This method can damage the power controller if you close the wrong contacts. Use it only as a last resort!

💡

Before you close your contacts, take a picture of where they are on your phone. The central contacts are responsible for data transmission, the extreme contacts are responsible for power. Only the extreme ones need to close!

Method 5: Shutting down via firmware (for advanced)

If you use custom firmware (such as Mi Band 2 Custom Firmware), it may have a full shutdown option built in.

1. Install the modified software via Mi Fit or Notify & Fitness.
2. In the bracelet menu, find the Power → Shutdown section.
3. Confirm the shutdown - the device will shut down in 5 seconds.

Advantages of custom firmware:

• ⚡ Ability to completely turn off with one touch.
• 🔧 Advanced energy saving settings.
• 📱 Support for notifications from third-party applications.

However, keep in mind:

• ⚠️ The risk of loss of warranty (if it is still valid).
• ⚠️ Possible bugs in the work of sensors.
• ⚠️ Not all firmware supports Russian language.

💡

Custom firmware gives you more control over the bracelet, but it requires experience in the firmware of gadgets. If you're a beginner, you'd better use standard shutdown techniques.

What to do if the bracelet is not turned off?

If none of the methods worked, check the following points:

If the bracelet is physically damaged (for example, after falling or getting moisture), it may not be possible to turn off.

1. Do not try to disassemble the device yourself - the risk of damaging the fee.
2. Contact the Xiaomi service center or a trusted wizard.

FAQ: Frequent questions about turning off Mi Band 2