How to Turn Off Xiaomi Mi Band 2 Fitness Bracelet 2: All Ways

The Xiaomi Mi Band 2 fitness bracelet remains one of the most popular activity-tracking gadgets, despite the release of new models. Its simplicity, reliability and long battery life make the device relevant even years after its release. However, many users are faced with the question: how to turn off the bracelet correctly if you suddenly need it? Unlike smartphones, where the power button is always at hand, with the Mi Band 2, it is not so obvious.

In this article, we will look at all possible ways to turn off the device, from standard to emergency. You will learn how to turn off the bracelet through the application, the physical button, and what to do if the gadget does not respond to commands. We will focus on the nuances that will help to avoid accidental discharge or resetting. For example, did you know that completely disabling the Mi Band 2 through the Mi Fit application can take up to 30 seconds? Or that a forced reset erases all data from the bracelet, including sleep history?

If you're looking for a way to save battery power without turning it off completely, there are some recommendations in this article, and for those of you who have experienced a device freeze, we've prepared a checklist to diagnose the problem. Let's get this straight!

Why you should turn off Xiaomi Mi Band 2

At first glance, a fitness bracelet doesn't need to be turned off: it consumes minimal energy and can run for months without recharging. However, there are a few situations where turning off the device becomes a necessity:

• 🔋 Long-term storage: If you don’t plan to use the bracelet for several months (e.g. while on vacation or switching to another model), a complete shutdown will prevent battery drainage.
• 🔄 Resetting: When selling or transferring the bracelet to another user, a full reset is recommended, which includes turning off the device.
• 🐢 System freeze. In rare cases, Mi Band 2 may stop responding to touch or synchronization. Rebooting or shutting down helps to restore performance.
• ⚡ If the battery is depleted to a critical level (less than 5%) and the bracelet cannot be charged, it is better to turn it off to save the remaining charge for data synchronization later.

It’s important to understand that the Mi Band 2 doesn’t have a classic power button.It uses a touch button instead, which performs different functions depending on the duration of the tap.This often confuses users, especially those who have not previously dealt with Xiaomi wearable electronics.

⚠️ Note: If you turn off the reset bracelet before selling, make sure that all important data (training history, sleep, pulse) is synchronized with the Mi Fit app.

Another thing that's not really keeping your steps and sleep data off, is if you're interested in idle statistics, you'd better leave the device on, but turn off notifications and background lights.

Method 1: Turn off via Mi Fit (official method)

The safest and most recommended way to disable the Xiaomi Mi Band 2 is to use the official Mi Fit app, which ensures that the device is shut down correctly without the risk of data loss.

1. Open the Mi Fit app on your smartphone and make sure the bracelet is connected (the battery level should be displayed at the top of the screen).
2. Go to the Profile section → Mi Smart Band 2 (or click on the bracelet icon on the home screen).
3. Scroll down to the optional settings and select Turn off the device.
4. Confirm the action in the window that appears. The bracelet vibrates and begins the process of disconnecting (can take up to 30 seconds).

If the item “Switch off” is not in the menu, check:

• 📱 Mi Fit version (upgrade to the latest in Google Play or App Store).
• 🔗 Bluetooth connection stability (reconnect the bracelet if it appears to be disabled).
• 🌐 Region in the application settings (some features may not be available in some countries).

⚠️ Warning: Once turned off via Mi Fit, the bracelet won't respond to the press of a button until you plug it into the charger.This is normal behavior - so Xiaomi protects the device from accidentally turning on.

Make sure the bracelet is at least 10% charged

Synchronize all data with the application

Disable notifications of calls and messages

Close background applications on a smartphone-->

Method 2: Turn off using a physical button

If you don't have access to your smartphone or the Mi Fit app doesn't work properly, you can turn off the bracelet directly through its touch button, which requires exact timing, as short taping performs other functions (time display, menu switching).

Instructions:

1. Place the bracelet on a flat surface or fix it on your hand to avoid accidental movements.
2. Find the touch button below the screen (it is indicated by a dot).
3. Press and hold the button for 10-15 seconds until the bracelet vibrates three times in a row.
4. After vibration, release the button, the screen will go out, and the device will start the process of turning off (can take up to 20 seconds).

If the bracelet does not respond:

• 🔋 Check the charge level (at a charge below 5%, the touch button may not work).
• 🧼 Wipe the button and screen with a dry wipe – pollution or moisture can block the sensor.
• 🔄 Try connecting the bracelet to the charger for 5-10 seconds, then try again.

This method is suitable for emergency situations, but has the risk of interrupting background processes (for example, data synchronization).If the bracelet freezes during shutdown, wait for the battery to fully discharge or use the reset method (described in the next section).

Once a month to reboot

Only before long-term storage

Never turn it off.

Turn it off when you're hanging.-->

Method 3: Forced reset (if the bracelet is not switched off)

If the Xiaomi Mi Band 2 doesn’t respond to commands from the app or press a button, there may have been a software freeze, in which case a forced reset will help, which also turns off the device. Note that this method removes all unsynchronized data and returns the bracelet to factory settings.

How to perform the reset:

1. Remove the bracelet from your hand and place it on the charger (even if the battery is not discharged).
2. Hold the touch button for 20-25 seconds until the Mi logo appears on the screen.
3. Release the button. The bracelet vibrates and starts the reset process (the screen will flash).
4. After restarting (about 30 seconds), the device will shut down automatically.

If the discharge did not work:

• 🔌 Try another charger or USB-Port (a faulty cable may block the process).
• 🕒 Wait 1-2 hours – sometimes the bracelet “wakes up” after a deep discharge.
• 📦 Contact the service center if the device does not show signs of life (hardware malfunction is possible).

⚠️ Warning: Forced reset disables all bracelet functions, including alarm clocks and notifications. Once turned on, you will need to reset via Mi Fit.

How to turn off the bracelet to save charge (without completely turning off)

If you want to extend the Mi Band 2 without turning it off completely, you can turn off the power-intensive functions, which can save up to 30% of your charge per month without losing the basic functionality (step count, time).

Additional savings tips:

• 📵 Turn off constant data synchronization (in Mi Fit, set manual update mode).
• 🌙 Use dark dials (AMOLED-Mi Band 2 screen consumes less power when displaying black).
• 🔋 Charge the bracelet to 80-90% instead of 100% – this prolongs the battery life.

If you still decide to turn off the bracelet completely for maximum savings, remember: Re-energizing will require a connection to the charger, even if the battery is not discharged.

💡

To quickly check the charge level without starting the application, tap the touch button of the bracelet - the battery indicator will appear on the screen.

Frequent Mistakes When Turning Off Xiaomi Mi Band 2

Many users have trouble turning off the bracelet because they don't know what it's like, and here are the most common mistakes and how to avoid them:

• ⏱️ Holding the button not long enough. Short press (less than 10 seconds) turns on a workout mode or shows notifications. Hold the button until you feel three vibrations.
• 🔌 Attempt to turn off the discharged bracelet. At a charge level below 5%, the touch button may not work. First, charge the device to at least 10%.
• 📱 Use of unofficial applications: Programs like Notify & Fitness or Mi Band Master don't always interact correctly with the Mi Band 2 firmware.
• 🔄 If you release the button before the vibration is complete, the bracelet can freeze.

Another typical situation is that users confuse shutdown with flight mode. Mi Band 2 does not have a separate flight mode, but you can disable Bluetooth connection via Mi Fit (Profile) → Turn off Bluetooth. It doesn't turn off the bracelet, it just breaks the connection to the smartphone.

If after turning off the bracelet spontaneously turns on, check:

• 🔋 Contact status of charger (short circuit may trigger bracelet).
• 💧 Moisture hitting the button (refrigerate the device within 24 hours).
• 📲 Availability of background processes in Mi Fit (reinstall the application).

💡

If the bracelet is not turned off by any means, most likely the problem is in the hardware (battery, control board).In this case, self-repair is not recommended - contact the Xiaomi service center.

How to turn on Xiaomi Mi Band 2 after turning off

Unlike switching on, the process of starting the bracelet after turning off is simpler, but also has nuances. The main rule: Mi Band 2 does not turn on without connecting to the charger, even if the battery is charged. This is done to protect against accidental pressing.

Step-by-step:

1. Connect the bracelet to the original charger (using uncertified chargers can damage the battery).
2. Hold the touch button for 3-5 seconds until the Mi logo appears on the screen.
3. Release the button. The bracelet vibrates and starts loading (the process takes about 10 seconds).
4. After turning on, sync the data with the Mi Fit application.

If the bracelet is not activated:

• 🔌 Check the cable and power adapter (try charging another bracelet or smartphone).
• ⏳ Wait 10-15 minutes – sometimes the device needs time to wake up after a deep discharge.
• 🔄 Try connecting the bracelet to another power source (USB-port of the computer, power bank).

Once enabled, you may need to re-assign to your Xiaomi account if you have previously reset.

1. Open Mi Fit and go to the Adding Device section.
2. Select Mi Smart Band 2 and follow the instructions on the screen.
3. Confirm the pairing on the bracelet (click the button when a request appears).

⚠️ Warning: If the bracelet turns on but turns off immediately, it is a sign of a battery failure, in which case the battery in the service center needs to be replaced.

FAQ: Frequent questions about turning off Xiaomi Mi Band 2