How to insert Xiaomi wireless headphones in the ear: a complete guide with photos and tips

Xiaomi’s wireless headphones are some of the most popular gadgets on the market, thanks to a combination of price, sound quality and functionality. However, even advanced devices such as the Redmi Buds 4 Pro, Xiaomi Buds 4 or FlipBuds Pro can be frustrating if they are not worn correctly. A bad fit leads to discomfort, headphones fall out while driving, noise reduction and even sound distortion. In this article, we will learn how to properly insert Xiaomi earphones into the ear so that they sit tightly, do not cause inconvenience and reveal the full potential of sound.

Many users mistakenly think that it is enough to just push the earpiece into the ear canal — but this is fundamentally wrong. The right fit depends on the anatomy of the ear, the choice of earpieces, insertion technique and even the headphone model. For example, Xiaomi AirDots with an open design requires one approach, and FlipBuds Pro with active noise cancellation — a completely different approach. We will consider the universal rules and nuances for different lines, and will give tips on care and storage, so that the headphones last longer.

Why it is important to properly fit headphones

The sound quality of wireless headphones is 60 percent tight when they fit in the ear canal. If the headphone is not tight, you lose bass, high-frequency detail suffers, and active noise cancellation (ANC) works half-heartedly. For example, in Xiaomi Buds 3T Pro models, when they are not properly fit, the ANC efficiency drops by 40 to 50 percent, making the function almost useless in noisy places.

In addition to sound, an incorrect landing leads to:

• 🔊 Headphone loss when running, training or sudden head movements.
• 😖 Discomfort after 30-60 minutes of wearing (pressured bulges, skin irritation).
• 🔋 Fast battery discharge – headphones spend energy amplifying sound to compensate for poor insulation.
• 🚫 Breakdowns of microphones - with a loose fit, wind noise enters the microphone, and the system tries to suppress it, overloading the hardware.

Xiaomi engineers take these nuances into account when designing headphones, but there is no universal solution - each user must choose the optimal fit for his or her anatomy.

Preparing headphones for the first use

Before you put your headphones in, you have to prepare them properly, which is especially important for new devices or if you haven't used a gadget in a long time.

Check the completeness (headphones, case, cable, earbuds)

Charge the case and headphones to 100% (the indicator on the case should burn green)

Update your firmware through the Mi Home or Xiaomi Wear app

Clean the earpieces and speaker grilles from the factory lubrication with a dry napkin

Choose the size of the bottles (usually included in the set are S/M/L)

-->

Pay special attention to the choice of embroideries. In addition to most Xiaomi models, you can find 3-4 pairs of silicone nozzles of different sizes.

1. Take a small mirror and look at the entrance to the ear canal.
2. If the hole is narrow and barely noticeable, you will fit the size S.
3. If the channel is medium-width, choose M (the most versatile option).
4. For a wide ear canal, take an L or XL (if included).

Test each size in turn: put on your earpiece, pull it slightly — if it slipped out effortlessly, the earpiece is too large. If you feel pressure after 5-10 minutes, take a smaller size.

💡

If standard earbuds don't fit, buy third-party foams (such as Comply Foam) that are better at reproducing the shape of the ear and improving noise reduction.

Step-by-step: how to insert Xiaomi headphones

Now, to the most important thing, the insertion technique, follow this algorithm to maximize tightness and comfort.

1. Take the headphone by the body (not for the earpiece!) so as not to deform it.
2. Pull the ears up and back with your left hand (for the right ear) – this straightens the ear canal.
3. Carefully insert the earpiece into the ear at an angle of ~30° forward, then slightly scroll it back so that the earpiece sits tightly.
4. Make sure the earphone doesn’t stick out – its body should almost touch the goat (the cartilage protrusion in front of the ear canal).
5. Repeat for the second ear, mirroring the sink.

For models with stabilizer bars (for example, Xiaomi Buds 4 Pro) additionally:

• 🔄 Scroll the headphone so that the bar rests on the anti-bellied (protrusion above the earlobe).
• 🔒 With a light press, fix the position - you should hear the click.

Check the tightness: close your ear with an earpiece and listen to music. If the sound is deaf, the landing is not tight, repeat the process. Ideally, external noise should be almost completely blocked (even without ANC).

Features for different Xiaomi models

Xiaomi headphone design varies depending on the line. Let's consider the key differences:

For models with active noise cancellation (ANC) After landing, be sure to run the test in the Xiaomi Wear app (Hearphone settings) → If the result is below 80%, repeat the insertion.

💡

Headphones with ANC (for example, FlipBuds Pro) require perfect tightness - in a bad landing, noise cancellation works idle, consuming the battery.

Common Mistakes and How to Avoid Them

Even experienced users sometimes make mistakes when using wireless headphones, and here are the most common ones and ways to fix them:

⚠️ Warning: Never insert Xiaomi headphones blindly without looking in the mirror.This can cause injury to the ear canal or eardrum, especially if the earbrush is deformed.

• 🚫 Using dirty bottles - accumulated sulfur and dust impair sound and hygiene.Solution: Wash the bottles with warm water and soap 1 time a week, dry for at least 12 hours.
• 🔊 Too loud music at maximum volume warps the embushures. Solution: Don't go over 70-80% volume, use an equalizer in the app.
• 🔋 Storing headphones outside the case results in loss of charge and dust on the contacts.Solution: Always put the headphones in the case after use, even for 5 minutes.
• 😴 Wearing during sleep can cause swelling of the ear canal. Solution: Use special earphones with a flat design (for example, SleepPhones) for sleep).

Another common problem is stereo imbalance (one earphone sounds quieter than the other).

• Bad landing of one of the headphones;
• Gray-clad speaker grilles;
• A dead battery in one of the headphones.

To diagnose a problem, change the headphones. If the quiet earphone is loud in the other ear, it's about landing. If the problem persists, clean the grilles or charge the device.

How to check if the headphones are sitting correctly

After inserting the headphones, perform several tests to make sure that the fit is correct:

1. Pressure test: Turn on the music at medium volume and cover your ear with your palm. If the sound is much quieter, the landing is not tight.
2. Comfort Test: Shake your head, tilt it in different directions, simulate chewing. Headphones should not move or cause pressure.
3. ANC test (if any): Turn on active noise cancellation and compare the level of external noise before and after. the difference should be noticeable (60-80%).
4. Microphone test: Record the voice message and check if there is wind noise or muffling, and if you land properly, the voice should sound clear.

For models that support the Xiaomi Wear app (such as Buds 4 Pro or FlipBuds Pro), run the built-in diagnostics:

1. Open the app and connect the headphones.
2. Go to the device settings → Test tightness.
3. Follow the instructions on the screen (usually sit quietly for 10-15 seconds).
4. If the result is below 80%, repeat the insert of headphones.

⚠️ Warning: If after several attempts, the leak test results below 70%, it may be worn out or not fitting.

Care and storage: how to extend the life of headphones

Proper care of Xiaomi headphones not only improves their fit, but also prolongs the life of the headphones.

• 🧼 Cleaning the bottles: Remove them 1 time a week, wash them in soapy solution, dry them away from direct sunlight!
• 🧴 Cleaning the case: Wipe your headphones and case with a wet wipe with an antiseptic (such as Miramistin.
• 🔋 Charging: Do not keep your headphones on charge for more than 2 hours after reaching 100%.Use only original cable or certified accessories.
• 🌡️ Temperature: Do not leave headphones in the case under direct sunlight (for example, on the torpedo of the car: +10°C. +30°S.

For storage:

• Always put the headphones in the case with the contacts down (this prevents oxidation).
• If you do not use headphones for more than a week, discharge them to 40-50% and store them in a dry place.
• Do not wear a case in the back pocket of your trousers – this can deform the earpieces when sitting.

The life of the masks is 6-12 months with heavy use. If they have lost their elasticity or become sticky, replace them. The original spare ones for Xiaomi can be bought on AliExpress or in brand stores.

FAQ: Answers to Frequent Questions