How to insert Xiaomi wireless headphones in your ears correctly: instructions with photos and tips

Misplaced Xiaomi headphones are one of the main causes of bad sound, quick discharge and even headaches. Even the most expensive Redmi Buds 4 Pro or Xiaomi FlipBuds Pro models will not realize their potential if they sit in their ears crooked or loose. In this article, we will discuss the step-by-step technique of installing, selecting earpieces, checking for tightness and eliminating typical errors.

Many users think it's enough to just shove an earbud in your ear, but that's a big mistake. Everyone has different anatomy in their ears, and Xiaomi headphone designs (especially those with vacuum earbuds) require a precise fit. If you feel uncomfortable after 20 minutes, socks or basses sound like a bucket, the problem is the wrong setup.

Why it is important to insert Xiaomi headphones correctly

The sound quality of wireless headphones is 60 percent dependent on how tightly they fit into the ear canal, and if the earpiece is not sealed:

• 🔊 Basses are lost -- low frequencies require a closed space to resonate. If you land badly, you'll hear only "empty" sound.
• 🎵 Noise insulation doesn’t work – foreign sounds enter your ear, causing you to turn up the volume (which harms your hearing).
• 🔋 Autonomy falls – headphones waste energy to compensate for poor acoustics, not playback.
• 😖 Discomfort when wearing – the wrong position presses on the cartilage of the ear, causing pain through 30-60 minute.

In active noise cancellation (ANC) models such as the Xiaomi Buds 3T Pro or Redmi Buds 4 Pro, a loose fit makes the ANC function useless.Microphones cannot accurately analyze external noise if the earphone is walking in the ear.

Another problem is that earphones fall out when running or exercising, and it's not because of bad attachment, but because the earpiece is not locked in the anti-angular fold (anti-helix) of the ear.

💡

Before the first installation, wipe the embusheries with an alcohol napkin - factory lubricant can reduce traction with the skin.

Preparation of headphones for the first installation

Xiaomi’s new headphones require pre-tuning, even if you’re a power user. Here’s what to do before you insert them into your ears:

1. Check the package. The box should have: 📦 The headphones and the case. 🔄 3-4 pairs of replacement embushures (sizes) S/M/L) 📑 Instructions (sometimes with QR-code for the Mi Earphone app) 🔋 Charging cable (USB-C microUSB, depending on the model)

Charge the headphones.

Update the firmware

Mi Home

Xiaomi Earphones

Clean the ear canals.

alcoholless

In Xiaomi models with wearable sensors (such as the Redmi Buds 3 Pro), improper installation leads to false pause/playbacks. If the earphone sits curved, the sensor will think that you have removed it.

Step-by-step: how to insert Xiaomi headphones

Follow this algorithm for any Xiaomi/Redmi model (AirDots, Buds, FlipBuds, etc.):

Choose the size of the bottles|Check the orientation of the headphones (left/right)|Pull the ears up and back.|Put the earpiece in at an angle. 15-20°|Scroll the headphone for fixation|Check the tightness with a touch-->

1. Choice of earbuds Headphones Xiaomi complete 3-4 It's the size of silicone nozzles, so you can pick up your own: 🔍 Wear an M headphone (Medium) – this is the standard size. 🎧 If you feel pressure, try L (Large). 👂 If the earphone falls out, try S. The leak test: cover your ear with your earpiece. If the sound is out, the earpiece fits. If the sound hasn't changed, you need another earpiece.
2. Definition of left/right headphone On the case of Xiaomi headphones there is a marking: 🅿️ L is the left (English Left) 🆁 R is the right one (Right)

In unlabeled models (e.g. Redmi AirDots 2), pay attention to the shape of the headphone:

• The left has a more gentle bend.
• The right one is more convex.
• Installation technique: Take the earpiece with your thumb and index fingers. Pull the earpiece up and back a little (this straightens the ear canal). Put the earpiece at a 15-20° angle to the nose, then scroll it forward slightly for the fixation. For models with ear hooks (such as the Xiaomi Haylou GT6): Hold the hook on the antagonal fold (the top of the ear). Put the ear canal in the ear canal. Pull the hook down with a slight motion, and hold it down, this will fix the hook.

This creates a vacuum effect that improves fixation.

How to check if the headphones are sitting correctly

Even if you think your headphones are sitting well, do these tests:

If at least one test fails, repeat the installation or change the insulation. In models with ANC (Redmi Buds 4 Pro, Xiaomi Buds 3T Pro), turn on noise cancellation to the maximum: if you hear external sounds, the leakage is broken.

⚠️ Warning: If after installing one earphone sounds quieter than the other, check the phone’s sound balance settings (Settings) → Sound. → Balance L/R). V 30% In cases, the problem is not in headphones, but in the downed settings of the smartphone.

Common Mistakes and How to Avoid Them

Even experienced users make these mistakes when installing Xiaomi headphones:

• 🔄 Left/right headphones are mixed up, which leads to discomfort and misallocation of sound (in stereo tracks, instruments sound the wrong way).
• 🧴 Dirty sacks, dust and skin fat reduce traction, clean the nozzles once a week with soapy solution (no alcohol!).
• 🔊 Too loud. If the headphones are not tight, you reflexively turn up the volume, which is bad for your hearing. 60-70% volume.
• 🏋️ Socks during sleep. Prolonged pressure on ear cartilage (more 2-3 It can cause an otohematoma (blood accumulation). Use special earphones with a flat earpiece for sleep.
• 🌡️ Use at extreme temperatures. Silicone embushure loses elasticity at temperatures below 0°C or higher than 40°C. In the cold, headphones can fall out, and in the heat - cause irritation.
• 🔋 Charging: Do not leave your headphones in your case for more than 24 hours. Use only the original cable. Once a month, discharge your headphones to 0% to calibrate the battery.
• 🌡️ Storage: Keep the headphones in the case at temperature 10-35°C. Avoid direct sunlight (UV breaks down silicone (ANC) time 3 Check the mic bars for a month, and dusty microphones can degrade the quality. ANC. Clean them with a soft brush (for example, for camera lenses). ⚠️ Attention: Never use cotton swabs to clean headphone speakers! cotton fibres can get inside and damage the membrane. Use a silicone brush or compressed air (a canister). 💡If the slacks have lost their elasticity, soak them in the 10 minutes in warm water with a drop of glycerol - this will temporarily restore the softness of silicone. FAQ: Frequent questions about Xiaomi headphones 🔊 Why is one headphone quieter than the other? The reasons may be different: Incorrect installation - check the tightness (see tests above). Contamination speaker - clean the grille with a brush carefully. Broken balance settings - on your phone, go to Settings → Sound. → Balance L/R And put the slider in the middle. Hardware malfunction - if nothing helps, contact the service (Xiaomi headphones are guaranteed). 12 months. 80% In some cases, the problem is solved by cleaning or correct installation. 🏃‍♂️ How to fasten Xiaomi headphones for running: 🏃 Use the slacks on a smaller size - they fit tighter. 🧢 Put a sports cap or bandage over your headphones. 🔗 Buy ear fixers (such as SpinFit) CP100). 💦 Wipe your ears with a dry wipe before exercising - sweat worsens grip. For running, models with ear hooks (Xiaomi FlipBuds Pro) or sports certification (Redmi Buds) are better suited. 3 Pro). 🔋 Why Xiaomi headphones are quickly discharged? Main causes: 🔊 Poor tightness – headphones spend energy to compensate for poor acoustics. 📶 Continuous Bluetooth connection – Turn off your headphones when not in use. 🎵 High volume – listen at the level 60-70%. 🌡️ Extreme temperatures – the battery discharges faster in the cold or in the heat. 🔄 Outdated firmware – update the software through the Mi Earphones app. If autonomy has fallen sharply (from the Internet) 5 hourly 1-2), Replacement of the battery (life of Li-ion batteries — 2-3 year-end). 😖 How do you get rid of the discomfort of long-term wear? The discomfort is caused by: Wrong size of the earpieces - try a different size; Pressure on the cartilage - scroll the earpiece after installation for better fixation; Allergies to silicone - replace the earpieces with hypoallergenic ones (for example, Comply Foam). Long-term wear – take breaks every time 1-1.5 hour. For models with ear hooks (FlipBuds Pro), try heating the silicone before installing (hold on). 1-2 minutes in the palms - it will become softer. 🎧 Can you use Xiaomi headphones with other phones (not Xiaomi)? Yes, Xiaomi headphones are compatible with any device on: Android (all versions) iOS (iPhone/iPad) Windows/macOS (for calls and music, however, some functions may be limited: 📱 iPhone does not work fast connection (you need to manually select headphones in Bluetooth). 🎛️ Setting up ANC Equalizer is only available through the Mi Earphones app (available for Android). 🔋 Case Charge Indicator is not displayed on all phones. For full work with the iPhone, use the HeyMelody app (similar to Mi Earphones for iOS).