Getting a new gadget is always a surge of enthusiasm, but often users are faced with the fact that the device does not respond to the taps immediately after being removed from the box.The Xiaomi Smart Band 8 Pro is no exception and comes with a partially discharged battery to keep the battery chemistry safe during storage.This is standard practice for all modern electronics, so the lack of screen reaction should not cause panic or thoughts of marriage.
The initial launch process requires several sequential actions, ignoring which can lead to a false conclusion about the malfunction of the device. Unlike a normal watch, there is no physical on button, since control is tied to the touch interface and interaction with the smartphone. Understanding the logic of the power system will help you quickly activate the tracker and start using its functions.
In this article, we will discuss in detail the algorithm of actions necessary to successfully activate your new device. We will look at the nuances of connecting to the network, the features of working with the Xiaomi Fitness application (formerly Mi Fit) and methods for solving typical problems when the screen remains black.
Primary charging as a condition of activation
The most important and often ignored step is to connect the device to the power source. As mentioned, the Xiaomi Smart Band 8 Pro battery is in deep sleep or has minimal charge. Trying to turn the device on without recharging is doomed to failure in 90% of cases, since the voltage is simply not enough to start the operating system and illuminate the display.
It uses a proprietary magnetic cable that comes with it. You need to carefully attach the contacts on the back of the tracker to the cable magnets. It is important to know that the charging indicator (usually an orange or green dot) only lights up after close contact, so make sure that the magnets are "grabbed" and do not stick off. If there is no contact, the screen will not light up, and the device will not go into a charging waiting mode.
It is recommended to use a power adapter with no more current 1 Ampere (standard) USB-The use of powerful fast-charging units from flagship smartphones is theoretically possible thanks to power controllers, but for a low-capacity lithium polymer battery, this creates an extra heat load. Leave the gadget on charging at least for 15-20 Even if the screen does not show signs of life immediately.
💡
If the charging indicator does not light up, wipe the contact area on the back of the bracelet with an alcohol napkin - there may be factory fat or protective film that prevents contact.
Once the device is on charge, try unlocking the screen by swiping your finger or touching the surface. If the display shows a picture of a battery with lightning or the Mi logo, then the process has begun. Don't rush to remove the bracelet from charging, it is better to bring the charge level to at least 30-40% before active use.
- ⚡ Use only the original magnetic cable from the supply kit.
- 🔋 Leave the device on charge for 20 minutes before the first attempt to turn on.
- 🚫 Avoid using powerful fast charging units (QC 3.0 and above) unnecessarily.
- 🧼 Wipe the contacts before charging to ensure a reliable connection.
Algorithm for screen activation and activation
Unlike mechanical devices, the Xiaomi Smart Band 8 Pro does not have a Power button. All navigation and control is done through a capacitive touch screen. Once you have verified the charge, the first action should be a touch or a swipe. Usually, just swipe your finger from the bottom up or just touch the center of the display to wake it up.
If you touch the screen and you see the logo of the system or the welcome message, it means that the device is working. In some cases, if the charge was critically low, the bracelet may immediately suggest choosing the interface language. The standard set of languages includes English, Chinese and, in global versions, Russian. The choice of language is the final stage of the device.
⚠️ Note: If the screen is lit, but through 5-10 It goes out for a second and doesn't react to touch anymore, which is a sign that the charge is still not enough to work properly. 10-15 minute.
Sometimes users are faced with a situation where the device turns on, shows the logo, but then turns off again. This may indicate a software failure or a "hang" of the power controller, in which case the forced reboot, which we will talk about in the troubleshooting section, helps, but first you should make sure that you interact with the sensor correctly.
☑️ Verification of primary inclusion
After successful inclusion and selection of language, you will see the main menu or screen with the main menu. QR-This means that the hardware of the device is functioning correctly, and now it is time for software configuration. Do not attempt to operate the bracelet without connecting to your phone, as most features, including time synchronization, will only become available after pairing.
Connection with a smartphone and installation of software
To fully work Xiaomi Smart Band 8 Pro is critical to install the right software on your smartphone. the main application for this device is Xiaomi Fitness (in some regions it can still be called Mi Fit, but for 8 Pro requires a new version).
The pairing process is as follows: after installing the application, you need to register or log into your Xiaomi Account. Then in the application you need to go to the Profile tab or click on the plus-plus to add a new device. The system will ask for permission to use Bluetooth and geolocation - this is a mandatory requirement for Android smartphones, without which it is impossible to find a device.
When the app starts searching, bring the bracelet closer to the phone, and the model name "Smart Band 8 Pro" should appear on the screen. Click on it, and the confirmation code will appear on the tracker screen. Check the numbers and confirm the pairing by clicking the tick on the bracelet, and then synchronize the time and basic settings.
| Parameter | Requirement/Significance | Importance |
|---|---|---|
| Operating system | Android 6.0+ / iOS 12.0+ | Tall. |
| Annex | Xiaomi Fitness | Critical |
| Bluetooth | Included (version 5.0+) | Critical |
| Geolocation | Included (for Android) | Tall. |
| Internet | Required for the initial setup | Medium |
Once paired successfully, the app will suggest updating the bracelet firmware. It is strongly recommended (using a soft wording, but the sense is serious) to agree to the update. New versions of the software often contain bug fixes, improve the stability of the Bluetooth connection and add new dials. The update process can take from 5 to 15 minutes, while keeping the phone next to the bracelet.
Configure the main functions and interface
Once the Xiaomi Smart Band 8 Pro is connected and updated, a wide range of customization options opens up. The main screen can be changed indefinitely by selecting dials from the huge library in the app. Some are free, others are available by subscription or for a fee, but the basic set is more than enough to start.
An important step is to set up notifications. In the Xiaomi Fitness app, under "Application Notifications," you can choose which programs will duplicate their messages on your wrist. These can be messengers, social networks, email clients or calls. Remember that you won't be able to respond to a message from the bracelet (unless these are standard templates), but it's easy to read the text and see the name of the caller.
You also need to set up health monitoring. Xiaomi Smart Band 8 Pro can track heart rate, blood oxygen (SpO2) and even stress. To work properly, you need to fit the wrist strap tightly. You can set the frequency of measurements in the settings: continuous monitoring puts the battery down faster, but gives a more complete picture, whereas measuring once every 10 or 30 minutes is more economical.
- 🎨 Download a personalized dial with photos or widgets.
- 📱 Set up a notification filter to avoid missing out on important things.
- 🏃 Choose the sports you plan to track.
- 🔔 Set goals for steps and calories in your user profile.
⚠️ Warning: Do not adjust the bracelet too tight, this can cause discomfort and affect the accuracy of the optical pulse sensor readings due to impaired blood circulation at the contact site.
The Bracelet supports more than 150 activities, and you can add frequently used types (running, walking, cycling) to your favorites for quick access. GPS-Tracking in the Pro model is built-in, which means the ability to track the route without a phone, but to synchronize the map, the phone will still need after training.
Problems with inclusion: diagnosis and solutions
Even if all instructions are followed, there may be situations when the Xiaomi Smart Band 8 Pro refuses to turn on. If the device does not respond to charging and touching, the first thing you need to do is check the cable itself and the power supply. USB-Or use another adapter, sometimes the problem is the oxidation of the contacts on the cable itself.
The second common problem is the system freeze: If the bracelet vibrates when you connect to the charger, but the screen is black, or if it shows the logo and turns off, try to force the reboot. This requires connecting the bracelet to the charger and holding the "touch button" (usually the bottom of the screen or a special zone specified in the manual) for 15-20 seconds.
What to do if the bracelet warms up when charging?
If none of the above helps, it may be a manufacturing defect, there are rare cases of a dead charge controller, if the bracelet was recently purchased, do not open it or try to resuscitate it with freezing, you better use the seller's warranty.
- 🔄 Try another one. USB-cable.
- ⏱ Perform a long reset (sensor retention 20 seconds).
- 🌡 Check the temperature of the body when charging.
- 🏪 Contact the service if the device does not show signs of life for more than 2 hours on charging.
Operation and maintenance of the device
Once successfully enabled and configured, it is important to properly care for the Xiaomi Smart Band 8 Pro to extend its lifespan.The device has 5ATM water protection, allowing you to swim in the pool and shower. However, avoid hot water, steam and saunas, as high temperatures destroy adhesive joints and seals.
Clean the back of the sensors and the strap regularly from sweat and dirt. Sweat buildup under the strap can irritate the skin and impair the quality of your pulse reading. Use soft cloth slightly moistened with water to clean, and avoid aggressive chemicals that can damage the oleophobic screen covering.
💡
Proper care of sensors and regular cleaning of the strap is the key to accurate measurements of health and the absence of allergies on the skin.
Keep the device safe from hitting hard surfaces. Despite the strong glass, extreme loads can cause cracks or damage to the matrix. Also, try to keep the battery from completely draining on a permanent basis, which reduces battery life. Try to charge the device when the energy level drops to 10-15%.