How to turn on Xiaomi Mi Smart Band 4C: full instructions with photos and tips

The Xiaomi Mi Smart Band 4C fitness bracelet is one of the most popular devices for tracking activity, sleep and notifications. However, even such a simple gadget can have difficulties with the first turn on. Most often, problems are associated with improper charging, lack of communication with the smartphone or improper actions during activation. In this article, we will analyze all the steps from unpacking to synchronization with the application, and also tell you what to do if the bracelet does not respond to a button or is not determined by the phone.

It's important to understand that the Mi Band 4C doesn't have a classic sensor screen, but it's a single physical button that simplifies the design, but requires a specific combination of taps. If you've just bought a device or are experiencing a freeze, follow our instructions Step-by-step.

Preparation for the first inclusion: what to check before the start

Before you try to turn on the bracelet, make sure that all the prerequisites are met. Often users miss this step, which causes the device to not respond to pressing or quickly discharge.

First, check the package: the box should contain the bracelet itself, the charging cable (usually with a USB-Type-A) and a brief instruction. If there is no cable, this is an excuse to go to the store, because you can not charge the device without it. Secondly, pay attention to the state of the contacts on the back of the bracelet: they must be clean, without oxidation or damage.

• 🔋 Charging before first switching on: even if the bracelet is new, its battery may have run out during storage.
• 📱 Smartphone Compatibility: Mi Band 4C It works with Android 5.0+ or iOS 10.0+. Make sure your phone meets the requirements.
• 🌐 Installed app: download Mi Fit (old version) or Zepp Life (new name) from the official store.

If you've bought a used bracelet, reset it to factory settings, press the button for 10 to 15 seconds until you feel the vibration, which will delete all previous data and allow you to link the device to your account.

How to Charge Xiaomi Mi Smart Band 4C

Incorrect charging is the most common reason why the bracelet doesn't turn on. Unlike smartphones, the Mi Band 4C doesn't have a charging indicator on the case, so users often wonder if it's going on. Here's how to do it right:

1. Remove the bracelet capsule from the strap by pulling it aside (do not make excessive efforts!).
2. Connect the capsule to the charging cable so that the contacts on the bracelet match the contacts on the clip.
3. Connect the cable to the power source (USB-port of the computer, charger for the phone with output 5V/1A).

It takes about 1-2 hours to charge, and to see if it's going on, look at the indicator on the screen: when you connect to the power, you should have a battery icon. If you don't have one, check the density of the contacts or try another. USB-port.

💡

If the bracelet is not charging, wipe the contacts on the capsule and cable with an alcohol wipe. Oxidation or contamination can block the current supply.

Process of inclusion: step-by-step instruction with photo

When the bracelet is charged (at least 10-20%), you can start to turn on. There is no touch screen in the Mi Band 4C, so all actions are performed through a physical button.

1. make sure that the bracelet is charged (the indicator of the battery when connected to charging)

Press and hold the button 3-5 seconds before vibration

3. Wait for the Mi logo to appear on the screen

4. Release the button and wait for the loading-->

If nothing happens after holding the button:

• 🔄 Try pressing the button for 10-15 seconds to force a reboot.
• 📵 Make sure the bracelet is not in Do Not Disturb mode (disables via the app).
• 🔋 Connect to charging for 5 minutes – sometimes the discharged device does not respond to the button.

After successful activation, the screen will have a time (if the bracelet has already been synchronized) or an invitation to connect to the phone. If the screen remains empty, but the bracelet vibrates, this may indicate damage to the display or a firmware failure.

Sync with your phone via Mi Fit or Zepp Life

Without a smartphone connection, the Mi Band 4C will only work like a pedometer clock, and to unlock all functions (notifications, sleep monitoring, pulsemeter), you need to sync it with the app.

1. Install the Zepp Life app (formerly Mi Fit) from Google Play or the App Store.
2. Sign up or sign in to your Xiaomi/Zepp account.
3. Click Add Device → Select Bracelet → Mi Smart Band 4C
4. Follow the on-screen instructions: Allow access to notifications, geolocation, and physical activity.

If the bracelet is not included in the appendix:

• 🔄 Reset the bracelet (hold the button for 10 seconds).
• 📶 Turn on Bluetooth on your phone and make sure the bracelet is no more than 10 meters away.
• 🚫 Remove the bracelet from the list of conjugate devices in your phone’s Bluetooth settings and re-search.

Once synchronized successfully, the wristband screen will have time, and the app will display battery and connection status data, and you can now set notifications, alarms and other functions.

💡

If the Zepp Life app doesn't see the bracelet, try using the older Mi Fit version.Some users note that it works better with the Mi Band 4C.

Common Problems and Their Solutions

Even after successful inclusion with the Mi Band 4C, there may be problems, and we have collected the most common ones and ways to fix them.

⚠️ Warning: If the bracelet stopped turning on after the firmware update, don't try to flash it again without recharging.This can result in the device being completely locked. First charge it to 50%.

If none of the methods helped, try to reset the bracelet to the factory settings:

1. Open the Zepp Life app.
2. Go to Profile → Mi Smart Band 4C → Device Settings → Reset.
3. Confirm the action and wait for the bracelet to reboot.

How to Update Your Firmware to Mi Band 4C

Updating the firmware can solve problems with the bracelet, add new features or improve stability, but do it carefully so as not to interrupt the process.

1. Make sure the bracelet is at least 50% charged.
2. Connect to a stable Wi-Fi network (updating via mobile is not recommended).
3. Open Zepp Life, go to Profile → Mi Smart Band 4C → Firmware Update.
4. If a new version is available, click Update and wait until it is completed (don’t turn off Bluetooth!).

⚠️ Warning: If the bracelet dies or communication with the phone is interrupted during the firmware update, the device may fail. Do not update the firmware if the battery is below 30%.

After the upgrade, the bracelet will reboot. If it doesn't turn on for more than 5 minutes, plug it into charging and repeat the process. In rare cases, you may need to reset your settings.

Tips for extending battery life

The Mi Band 4C is designed for 10 to 14 days of battery life, but can discharge faster when used actively.

• 🔋 Turn off constant heart rate monitoring (only during exercise).
• 📵 Reduce the number of notifications – leave only important ones (calls, SMS, messengers).
• 🌙 Use sleep mode at night (turns off screen lighting when moving).
• 🔄 Update your firmware – newer versions often optimize your power consumption.

Also avoid extreme temperatures: do not leave the bracelet in direct sunlight or in the cold. The optimal range is from +10 ° C to +35 ° C.

FAQ: Frequent questions about Xiaomi Mi Smart Band 4C