How to turn on and set up NFC Xiaomi Mi Band 6: instructions with pictures

Fitness bracelet Xiaomi Mi Band 6 NFC — One of the most popular devices for tracking activity, but its key feature is the module. NFC, Many users are unaware that their bracelet can replace a bank card, an office pass or a transport card. In this article, we will discuss how to activate the bracelet correctly. NFC, Link payment cards and avoid typical errors when setting up.

It is important to understand the Mi Band 6 version NFC The difference from the standard model is that there is a short-range contactless chip, unless the box or the specifications of your device indicate that it is not in the box "NFC", So it's not a hardware feature, and it's not going to work. For the rest of the owners, we've prepared a step-by-step instruction for the latest firmware updates from 2026.

The setup process takes no more than 10 minutes, but requires preparation: checking the compatibility of the smartphone, installing the current version of the Mi Fitness app (formerly Mi Fit) and having supported bank cards.

1. Compatibility Check: Does your Mi Band 6 support NFC?

Before you try to enable the feature, make sure your device supports it. There are two versions of the Mi Band 6 on the market:

• 🔹 Standard version - no NFC, box-marking: XMSH15HM or XMSH16HM.
• 🔹 Version C NFC — Support for contactless payments, marking: XMSH17HM or XMSH18HM (for the Chinese market).

How to check:

1. Look at the box, there should be an inscription "NFC" contactless.
2. Go to the Mi Fitness app, select your bracelet and open the About Device section "NFC “Purpose” means that the module is present.
3. On the bracelet itself, swipe down the screen to open the menu. 💳 — NFC maintained.

⚠️ Note: Bracelets purchased in China (version) XMSH18HM), There may be restrictions on the binding of foreign bank cards. XMSH17HM.

Preparation of the smartphone: what are the requirements for the phone?

To set up NFC On the Mi Band 6, your smartphone must meet several criteria:

Features for iPhone:

• 📱 On iOS, bank card binding is only possible through Apple Pay, but payment from the bracelet will work independently.
• 🔄 For data synchronization will require an iPhone 6s or newer.

For Android:

• 🤖 Make sure that the phone settings are enabled NFC Host Card Emulation (HCE) (usually in the section "Wireless networks" → More").
• 🔒 If you use MIUI, Check the permissions for the Mi Fitness application in "Settings" → Annexes → Permits".

💡

If you have Xiaomi or Redmi on MIUI, pre-set NFC Turn off Battery Optimization for Mi Fitness app – this will prevent synchronization failures.

3. Step-by-step instruction: how to turn on NFC Mi Band 6 on the way

Now, to the main thing, activate the module, follow the instructions carefully, as skipping steps can lead to errors.

Step 1: Update the bracelet firmware

Before setting up NFC Make sure that the bracelet has the right firmware installed:

1. Open the Mi Fitness app.
2. Select your Mi Band 6 from the device list.
3. Go to "Device Profile" → Firmware update".
4. If an update is available, install it (the bracelet must be charged at 50%+).

Step 2: Activation NFC appendix

After the update:

1. In the Mi Fitness app, go to "Profile" → Mi Band 6 → NFC payment".
2. Click "Add card" or "Configure" NFC".
3. Follow the instructions on the screen – the system will offer to bring the bracelet to the phone for synchronization.

Step 3: Linking a Bank Card

For the bracelet:

1. Select a bank from the list of supported banks (for example, Sberbank, Tinkoff, VTB).
2. Enter the card data manually or scan it through the phone camera.
3. Confirm the binding via SMS or push notification from the bank.
4. Wait for the synchronization (can take up to 5 minutes).

Mobile Internet connection on the phone|Bracelet charged at 30%+|NFC switched on on on the phone and bracelet|Map added in the Mi Fitness app-->

If the card is not tied:

• 🔄 Reset the bracelet (press the touch button for 10 seconds).
• 📱 Remove and re-add the bracelet in the Mi Fitness app.
• 💳 Check if your bank supports contactless payments through the Mi Band (list on Xiaomi website).

⚠️ Note: Some banks (e.g. Alfa-Bank) require the pre-activation of the contactless payments through gadgets service in their personal account.

4. Set up transport maps (World, Troika, Arrow)

In addition to bank cards, Mi Band 6 NFC It supports the binding of transport cards. The process varies depending on the region:

For Moscow and the Ministry of Defense (Troika map)

1. In the Mi Fitness app, select "Transport Card".
2. Press "Add a Troika card."
3. Enter the card number or scan it through your phone.
4. Confirm the binding (may be required) SMS-code).

For St. Petersburg (Planet Card)

As of 2026, the Mi Band 6 does not officially support the Plantain, the alternative is to link a bank card with a payment function (for example, a Tinkoff card with cashback for the fare).

For other regions (the map "World")

If your city supports payment for transport by card World:

• 💳 Link the card "World" as a bank card (see section 3).
• 🚌 Make sure that the "Transport Application" function is activated on the card (you can check in the bank).

5 How to use NFC: payment and other functions

After setting up, you can use the bracelet to:

• 💰 Payments in stores - bring the bracelet to the terminal (distance up to 5 cm), wait for vibration and sound signal.
• 🚌 Travel in transport - similar to a bank card (in Moscow works on the metro, MCC, ground transport).
• 🔑 Opening of doors – if the office or entrance is installed NFC-Reader, you can write an electronic key to the bracelet (support from the management company is required).

Important nuances when paying:

• 🔋 Make sure the bracelet is above 20% when charged low NFC may be off.
• 📶 For the first payment, you need to connect to the phone (after – it works autonomously).
• 💳 If the terminal requests PIN-code, payment from the bracelet is not possible - use the card.

Mi Band 6 NFC supports up to 5 attached cards at a time, but only one can be used for payment (selected from the menu of the bracelet).

Typical problems and their solution

Even with the right setup, users are faced with errors.

If the bracelet has stopped responding NFC:

1. Remove it from the Mi Fitness app.
2. Reset the bracelet settings (in the menu "About the device") → Reset").
3. Re-add the device and repeat the setting.

⚠️ Warning: Once reset, all the attached cards will be removed, and you'll have to add them again.

💡

If the terminal does not accept payment from the bracelet, try to bring it to the reader from a different angle - sometimes turning 90 degrees helps.

7.Security: How to Protect Your Data

Contactless payments are convenient but require increased attention to security.

• 🔒 Install. PIN-bracelet code: in Mi Fitness go to Lock Screen and activate protection.
• 📱 Disable autoconnect to the bracelet in your phone’s Bluetooth settings – this will prevent unauthorized access.
• 💳 Use virtual cards (such as from Tinkoff or Sber) instead of the main debit card – this is how you can limit the risks.
• 🔄 Check your mobile bank’s transaction history regularly.

What to do if the bracelet is lost:

1. Remove it from the Mi Fitness app immediately, and it will untie all cards.
2. Block the linked cards through a mobile bank.
3. If you find the bracelet, you can add it again, but you have to tie the cards from scratch.

Xiaomi claims that the card data is stored in encrypted form, and for each transaction a unique token is generated.However, it is not recommended to tie cards with large limits to the bracelet.

FAQ: Frequent questions about NFC on Mi Band 6