Xiaomi Mi True Wireless Earbuds Basic 2 is a popular model with a good value for money, but their first connection sometimes raises questions. TWS-In this article, we will discuss not only the basic steps of inclusion, but also the nuances: what to do if the headphones are not determined, how to reset, and why one earphone may not work.
The main problem with first use is that users often confuse on and pairing modes. For example, simply pressing the power button does not always activate the Bluetooth search mode necessary to connect to a phone, we will show you how to correctly translate headphones into discoverable mode, as well as give tips on audio optimization and battery saving.
This article will be useful for beginners and those who have already used Mi True Wireless Earbuds Basic 2, but encountered errors after updating the firmware or resetting settings. All instructions are checked on current versions of Android (12-14) and iOS (15-17), as well as taking into account the latest firmware updates for headphones (2023-2026).
Preparation of headphones for the first turn on
Before you turn on the Xiaomi Mi True Wireless Earbuds Basic 2, make sure they are fully charged. Even if the indicator on the case is green, it doesn't always mean 100% charge on the headphones themselves.
- 🔋 Put the headphones in the case and close the lid. In 5-10 seconds, the indicator on the front panel of the case will show the current charge level: Red - less than 30% Orange - 30-70% Green - 70-100%
- 📱 If the headphones are already connected to the phone, the charge level of each headphone is displayed in the status bar of Bluetooth (on Android) or in the Battery widget (on iOS).
- ⚡ When using the device for the first time, it is recommended to charge the case with headphones for at least 2 hours, even if the indicator shows green color.
Also check that your smartphone has Bluetooth enabled and no active connections to other audio devices (columns, car systems, etc.) on Android, you can do this through the Quick Settings Panel, on iPhone, in Settings → Bluetooth.
💡
If the headphones lie unused for a long time (more than 3 months), before the first turn on, hold them in a case for charging for 10-15 minutes - this will restore the minimum charge for activation.
How to Enable Xiaomi Mi True Wireless Earbuds Basic 2: Step-by-step Instructions
The Mi True Wireless Earbuds Basic 2 is different from the traditional wired models, and there's no separate power button, and it's controlled through the touch panels on each headphone body. Here's how to do it right:
- Take both earbuds out of the case. They will automatically turn on in 2-3 seconds (you will hear the beep and see the flashing indicators).
- Wait for synchronization. The headphones will first connect (right becomes lead, left becomes follow), and then go to Bluetooth search mode, which takes about 5-7 seconds.
- Activate pairing mode (if necessary). If the headphones are not detected by the phone, press and hold the touchpad on the right earphone for 5 seconds until the indicator flashes red and white.
Importantly, if you only pull out one headphone, it won’t go into pairing mode – you always need to use both headphones at the same time. Also note that after the first connection, the headphones will automatically connect to the phone when removed from the case (if Bluetooth is on).
Got both earphones out of the case |
Indicators flash white/red-white |
Bluetooth enabled and other audio devices disabled |
Headphones are located at a distance of no more than 1 meter from the phone-->
Connecting to Android: nuances and possible errors
On Xiaomi, Redmi or other Android devices, Mi True Wireless Earbuds Basic 2 is usually easy to connect to, but there are a few things that can cause problems:
- 🤖 Automatic Connection: If the headphones have been paired before, they will connect automatically when removed from the case.To connect to another device, first remove them from the Bluetooth list on the old phone.
- 🔍 Device search: In the list of available devices, headphones can display as Mi True Wireless Earbuds Basic 2, Mi Basic 2 or simply simply LE-B12 (code).
- 🔄 Connection problems: If the headphones are defined but not connected, try: Reboot Bluetooth on your phone (Settings) → Connections → Bluetooth → Reset your headphone settings (press the button on the case for 10 seconds until the indicator flashes red 3 times).
Some MIUI firmware (e.g. MIUI 14) may display a notification of "incompatible audio format"; this is not a mistake - just confirm the connection. It is also recommended to go to the Bluetooth settings after pairing, select Mi True Wireless Earbuds Basic 2 and enable the option High-quality audio (AAC or aptX) if available.
MIUI 12|MIUI 13|MIUI 14|Another version |I don't know-->
Connection to iPhone (iOS): features and limitations
While the Xiaomi Mi True Wireless Earbuds Basic 2 isn’t officially certified for iOS, it works perfectly with the iPhone, but with some limitations. The main difference from Android is that it doesn’t support the aptX codec, so the sound is transmitted via AAC or SBC protocol.
Instructions for connection:
- Open the settings → Bluetooth on the iPhone.
- Take the headphones out of the case and wait until they appear on the list as Mi True Wireless Earbuds Basic 2.
- Click on the name of the pairing device. If you have a confirmation request, select Connect.
Important nuances for iOS:
- 📊 Charge level: The iPhone displays only the overall charge of the case, but not individual headphones (unlike Android).
- 🎧 Functions: Control gestures do not work (for example, double-touch to call a voice assistant), as they are configured for XiaoAI (Chinese analogue of Siri).
- 🔊 Sound: There may be delays when watching videos due to lack of aptX Low Latency, solved by enabling Game Sound mode in the headphone settings (if available).
How to turn on the “Game Sound” mode on iOS?
Problem Solving: Headphones are not turned on or connected
If the Xiaomi Mi True Wireless Earbuds Basic 2 doesn’t respond to taps or isn’t determined by the phone, the causes can range from a dead battery to software failures.
| Problem. | Possible cause | Decision |
|---|---|---|
| Headphones are not on | Headphones or case discharged | Put the headphones in the case and connect to the charge for 30+ minutes. The indicator on the case should burn red. |
| The indicators don't burn. | Contamination of contacts in the case | Clean the contacts in the case and on the headphones with a cotton swab dipped in alcohol. |
| Not defined by Bluetooth. | Failure of synchronization between headphones | Put the headphones back in the case, pull out and hold the button on the case for 10 seconds. (reset). |
| Only one headphone is connected. | Not synchronized with each other | Put both headphones in the case, close the lid for 10 seconds., then take out and wait for the double beep. |
| The sound is interrupted. | Interference from other devices | Turn off other Bluetooth devices nearby or reconnect the headphones elsewhere. |
Critical error: If the headphones stopped turning on after reset (no indication and no audible signals), this may indicate damage to the power controller, in which case repair or replacement is required under warranty.
💡
If the headphones don't respond to the reset, try connecting them to another phone, and if the problem persists, the malfunction is hardware, not software.
Customization of gestures and headphone management
Xiaomi Mi True Wireless Earbuds Basic 2 supports basic touch gestures, but their configuration depends on the firmware and phone model.
- 🎵 Reproduction/pause: One touch on any earpiece.
- 🔀 Next Next post: Double touch on the right earpiece.
- 🔙 Previous Post: Double touch on the left earpiece.
- 📞 Accept/reject call: One or double touch (depending on firmware).
On Android with MIUI 12+, you can change the purpose of gestures through the Mi Earphones app (download to Google Play).
- Put the headphones on the phone.
- Open the app and select Mi True Wireless Earbuds Basic 2.
- Go to the Touch Management section and set up gestures as you wish.
On iPhone, you can not change gestures, but you can turn them off completely in Bluetooth settings (select headphones → Forget this device → connect again and refuse to configure gestures when you request).
💡
If headphones accidentally activate gestures (such as when walking), reduce sensor sensitivity in the Mi Earphones app or turn off unnecessary commands.
Optimizing Sound and Saving Battery
To get the best sound quality and extend the running time of Mi True Wireless Earbuds Basic 2, follow these tips:
- 🎧 Choice of codec: On Android in Bluetooth settings, select AAC or aptX (if available). On iOS, the codec is automatically selected.
- 🔋 Saving charge: Turn off the headphones when not using (put in the case). Also reduce the volume - at maximum level, the battery dies 2 times faster.
- 🔇 Noise reduction: There is no active noise reduction in this model, but you can improve the insulation by choosing the right earpieces (there are 3 sizes included).
- 📱 Firmware Update: Check for updates periodically through the Mi Earphones app – they can improve sound and connection stability.
Average operating time on one charge:
- Without the case: 4-5 hours (depending on volume).
- Case: up to 20 hours (4 full charge headphones).
If the battery starts to run too fast, try resetting the headphones and reconnecting them. Also avoid storing the headphones in the cold or in a hot place (for example, in direct sunlight) - this reduces the battery life.