Xiaomi Air 2 SE: How to turn on headphones and connect to the device

Wireless headphones Xiaomi Air 2 SE They've become a popular choice among users because of their combination of sound quality, ergonomics and affordable prices, but even with a device that's so simple, sometimes it's difficult, especially for newcomers. How to properly turn on headphones and sync them with your phone, tablet or computer.

In this article, we will discuss not only the basic ways to activate Air 2. SE, But there are also nuances that are not written in the official manual, like what to do if the headphones don't respond to the push of a button, how to reset to the factory settings, and why one earphone might not connect.

If you’ve just unpacked your headphones or have trouble updating your firmware, this guide will help bring them back to life. SE and prepare for conjugation.

How to turn on headphones Xiaomi Air 2 SE

Xiaomi Air 2 SE There are two main modes of operation: normal (for listening to music) and pairing (for connecting to a new device.

To simply turn on the headphones after extraction from the case, it is enough to perform one of the actions:

• 🔋 Get both headphones out of the charging case - they will automatically turn on through 2-3 Seconds (indicators flash white).
• 🎧 If the headphones are already out of the case, press and hold the touchpad on any of them for a while. 1.5-2 seconds until you hear the beep.
• 🔄 If the headphones don’t respond, place them back in the case for 10 seconds, then pull them out again.

For pairing mode (when you need to connect headphones to a new phone or PC), the algorithm is different:

1. Make sure the headphones are off (put them in the case for 5 seconds).
2. Take out both headphones and hold the touchpads on both at the same time for 5 seconds until the indicators start flashing red and white.
3. On your phone, turn on Bluetooth and select Mi Air 2. SE list of available devices.

💡

If the lights flash only white, not red and white, the headphones have not switched to pairing mode. Repeat holding the touch panels longer (up to 7 seconds).

Important: After successfully connecting to the Air 2 device SE They'll remember it and automatically connect when they turn on the next time they turn on.

How to check the charge and condition of headphones

Before turning on Xiaomi Air 2 SE It's useful to know the charge level to avoid a sudden blackout:

1. Through the indicators on the case:

• 🔋 1 blinking white - case charge 0-25%.
• 🔋🔋 2 flashing — 25-50%.
• 🔋🔋🔋 3 flashing — 50-75%.
• 🔋🔋🔋🔋 4 flashing — 75-100%.
• 🚨 Red – Case charge less than 10%, urgent charging is required.

2. via the Mi Home or Xiaomi Wear mobile app:

1. Put the headphones on the phone.
2. Open the app and select Mi Air 2 SE from the device list.
3. The screen will display the level of charge of each headphone and case, as well as battery life.

3. Through a notification on the phone:

On Android (especially on smartphones) Xiaomi/Redmi/POCO) When you plug in the headphones, you get a pop-up with a percentage of charge. On your iPhone, you can see this information in Settings. → Bluetooth (click on the i icon next to the Mi Air) 2 SE).

Connecting Xiaomi Air 2 SE device-wise

The Air 2 pairing process SE It's a little bit different depending on the type of device.

1. Connection to a smartphone on Android:

• 📱 Open the Settings. → Bluetooth and turn on the module.
• 🔍 In the list of available devices, find Mi Air 2 SE (It can be displayed as LE-Air 2. SE).
• 🔗 Click on the headphone name and confirm the pairing.
• 🎵 After connecting, check the sound in any player.

2. Connection to iPhone or iPad:

On Apple devices, the algorithm is similar, but there's a caveat: sometimes the headphones can connect as Mi True Wireless. If the sound is interrupted, go to Settings. → Bluetooth → i → Microphone and select Mi Air 2 SE main-stage.

3. Connecting to Windows 10/11:

1. Press Win + I, select Devices → Bluetooth and other devices.
2. Activate Bluetooth and press Add Device → Bluetooth.
3. Select Mi Air 2 SE from the list.
4. If the sound is only in one headphone, go to the Control Panel. → Sound, select headphones and click Set up, then mark Stereo.

Connection to MacBook:

On macOS headphones are connected through System settings → Bluetooth. If you have a sound problem, check the audio output settings in System settings. → Sound. → Exit.

Important: Xiaomi Air 2 SE Support Bluetooth 5.0 protocol, but a supportive adapter may be needed to connect to a PC A2DP (especially on older laptops).

Resetting Xiaomi Air 2 settings SE factory-to-factory

If the Air 2 headphones SE If you stop connecting, one of them doesn't work, or you have a sound problem, you can reset your settings completely, and this procedure removes all the stored devices and returns the headphones to their original state.

Resetting instructions:

Once reset, the headphones will be ready for a new pairing. If the problem persists, check:

• 🔋 Charge level (discharged headphones may not be included).
• 📱 Compatibility of the device (Bluetooth 4.2 or later).
• 🔄 Update firmware (via the Xiaomi Wear app).

⚠️ Note: Resetting does not solve hardware problems such as damage to the speaker or charging contacts. If one of the headphones does not make sound after reset, contact the service center.

Headphones Xiaomi Air 2 SE They have a hidden test mode function that helps diagnose malfunctions:

1. Put the headphones in the case.
2. Open the lid and press the button on the case 5 times in a row (with an interval of 1 second).
3. The indicators will start flashing blue – this means that the headphones have entered test mode.
4. Get the headphones out: they will voice the status of the battery and connection.

Common Problems and Their Solutions

Even after correctly switching on Xiaomi Air 2 SE And these are the most common problems that users face, and the ways to fix them:

1. One earphone is not connected:

• 🔄 Place both headphones in the case, close the lid for 10 seconds, then pull out.
• 🔋 Check the headphone charge (red indicator) = discharged).
• 🧹 Clean the contacts on the headphone and in the case with a cotton swab dipped in alcohol.
• 🔗 In Bluetooth settings on your phone, “forget” the device and connect again.

The headphones discharge quickly:

• 🔋 Turn off the function Automatic Shutdown when extracted in the Xiaomi Wear app (it consumes a charge to search for the device).
• 🎵 Turn down the volume – at maximum level, autonomy decreases by 30%.
• 🔄 Update the firmware of the headphones (older versions may have power consumption errors).

3. The sound is interrupted or distorted:

• 📶 Make sure there are no obstacles between the headphones and the phone (walls, metal objects).
• 🔄 Reboot your phone and headphones (place them in your case for 10 seconds).
• 🎧 In Bluetooth settings, select Sound Quality Priority (on Android).
• 🔋 Check the charge of the headphones - at a level below 15%, interference may occur.

4 Headphones are not defined by the telephone:

• 🔄 Turn off and turn on Bluetooth on your phone again.
• 📱 Remove all previously saved Mi Air devices in Bluetooth settings.
• 🔋 Charge the case to 100% – at low charge, the headphones may not transmit the signal.
• 🔄 Reset the headphone settings (instructions in the previous section).

⚠️ Note: If the Air 2 headphones SE They're connected, but the sound is only going to one channel (mono), check the audio output settings on the device. On Windows, this is fixed through the Control Panel. → Sound. → Properties → Spatial sound (turn off).

Hidden features of Xiaomi Air 2 SE

In addition to the basic features, Xiaomi Air 2 SE They have a few hidden features that few people know about, and they make it easier to use and they make it more powerful.

1. Gesture control:

• 🎵 Double touch - playback / pause.
• 🔊 Triple touch - the next track.
• 📞 Holding 1 second – accept/complete the call.
• 🔇 Hold 2 seconds – Turn off the microphone during the call.

Low Delay Mode (Game Mode):

To reduce the latency of sound (relevant for games and videos), activate the mode in the Xiaomi Wear app:

1. Open the app and select Mi Air 2 SE.
2. Go to the headphone settings → Game mode.
3. Activate the option – the delay will be reduced from 200 ms to 100 ms.

Equalizer setting:

In the same Xiaomi Wear app, you can select one of the preset sound profiles:

• 🎶 Balance - Standard settings.
• 🎤 Vocals - Augmentation of the medium frequencies.
• 🥁 Basses - increasing low frequencies.
• 🎻 Classics – High frequency emphasis.

Voice assistant:

The headphones support calling the voice assistant (Google Assistant or Siri):

• On Android: Double touch left earphone (configurable in the app).
• On iPhone: Hold the touch panel on any headphone.

💡

To activate hidden features, be sure to update the headphone firmware through the Xiaomi Wear app. Without an update, some options (such as Game Mode) may not be available.

Update firmware Xiaomi Air 2 SE

Regular firmware updates fix bugs, improve sound and add new features. You can check the relevance of the version and update the headphones through the official Xiaomi Wear app (formerly Mi Home).

Instructions for updating:

1. Install the Xiaomi Wear app from Google Play or the App Store.
2. Connect the headphones to the phone via Bluetooth.
3. Open the app, select Mi Air 2 SE.
4. Go to Settings → Update firmware.
5. If a new version is available, click Update and wait until it is completed (the headphones will reboot).

Important points:

• 🔋 Make sure the headphones and case charge is above 50%.
• 📶 Connect your phone to a stable Wi-Fi network.
• 🚫 Do not interrupt the update process – this can cause firmware to fail.
• ⏳ Update takes 3-5 minute.

⚠️ Note: After updating the firmware, the headphones can automatically reset the pairing settings. If they don't connect to the phone, remove them from the list of Bluetooth devices and pair them again.

If the update has hung or the headphones stopped turning on after firmware, reset the settings (instructions in the section above) and try again.

Frequently Asked Questions (FAQ)