Xiaomi Air 2 Pro not connected? full on and setup instruction (2026)

Xiaomi Air 2 Pro wireless headphones remain among the most popular TWS-But even with this proven device, users have problems with first switching on or after long periods of downtime. "Hearbuds don't respond to a button," "they don't sync," "the phone doesn't see the device," "the reason is because of a wrong sequence, a dead battery, or software failures.

In this article, we'll take a step-by-step photo guide to how to turn on the Xiaomi Air 2 Pro in different scenarios: first connection, re-sync after reset, restore one earphone. We'll also take a look at hidden features (like low latency for games) and give a checklist to diagnose malfunctions. If your headphones fail, 90% of problems are solved without going to the service center.

1.Preparation for the first inclusion: what to check before the start

Before you try to turn on the headphones, make sure that the basic conditions are met. 60% of the calls in support are due to banal omissions at this stage.

First, check the charge level of the case. The indicator on the front panel should flash white when connected to the charger or burn constantly (if the charge is full).

• 🔌 Connect the case to the original cable USB-C (exit-adapter 5V/1A).
• ⏳ Wait 10-15 minutes – sometimes the discharged battery does not “wake up” immediately.
• 🔄 Try another charger (like from a smartphone).

Second, remove the headphones from the case and inspect the contacts for oxidation or contamination. Contacts on the headphones and inside the case should be clean and dry - even microscopic dust can block charging and synchronization. Use a cotton swab dipped in alcohol to clean (don't overdo it with moisture!).

💡

If the headphones were left unused for a long time (more than 3 months), their batteries could go into sleep mode, in which case leave them on charge in the case for 1-2 hours, even if the indicator does not burn.

2. Standard on: synchronization of headphones with the phone

If the headphones and case are charged, move on to switching on.The algorithm for the Xiaomi Air 2 Pro is different from newer models (such as the Air 3 Pro), so watch the sequence:

1. Remove both earphones from the case. They must automatically turn on (the indicators on the headphones flash red/white).
2. Wait for the synchronization between the headphones (the indicators will flash alternately white). This takes 5-10 seconds.
3. Activate Bluetooth on your smartphone and find Mi True Wireless Earphones 2 Pro.
4. Connect to the headphones. The first time you connect, you may need to confirm the pair.

If the headphones do not appear in the list of devices:

• 📱 Reboot Bluetooth on your phone (Settings) → Bluetooth → Off./On.).
• 🔄 Return the headphones to the case, wait 10 seconds and retrieve.
• 📴 Make sure the headphones are not connected to another device (e.g. a laptop).

Case charge > 20%|

Contacts headphones and case clean |

Bluetooth on your phone turned on |

The headphones are not connected to other devices-->

3. Forced reset: if the headphones do not respond

If the Xiaomi Air 2 Pro doesn’t turn on or sync with each other, a hard reset is required, which will return the headphones to factory settings and often solves connection problems.

Resetting instructions:

1. Place both headphones in the case and close the lid.
2. Press and hold the touchpad on the case (located below the indicator) for 15-20 seconds.
3. The indicator on the case will flash red and white – this is a signal of a successful reset.
4. Remove the headphones and repeat the connection procedure (see section 2).

Once reset, the headphones will lose all the connections they've saved. If the problem persists, check:

• 🔋 Headphone charge (indicators should flash when extracted from the case).
• 📲 Compatibility of the phone (headphones are optimized for the MIUI, But they work with Android. 8.0+/iOS 10+).
• 🔄 The version of the firmware headphones (about this in the next section).

4. Firmware Update: Why It Matters

Xiaomi Air 2 Pro received firmware updates until 2022, but even an outdated version of the software can cause connection problems. For example, in the firmware V1.4.0.6 was a bug that caused the headphones to spontaneously disconnect from devices on iOS.

To update the firmware:

1. Connect the headphones to a Xiaomi smartphone (or other device with MIUI).
2. Open the Mi Home app (or Xiaomi Wear for newer versions).
3. Find Air 2 Pro in the list of devices and go to Settings → Firmware Update.
4. If a new version is available, follow the instructions on the screen.

Up-to-date firmware versions for Air 2 Pro:

Important: If your firmware version is older than V1.4.0.6, make sure to update it. Outdated software may conflict with current versions of Android and iOS.

V1.7.1.0 (last)|

V1.4.0.6|

Old version (until 2021) |

I don't know how to check.|-->

5 Hidden functions: how to use them in full

Xiaomi Air 2 Pro supports several useful modes that many users are unaware of.

• 🎮 Low Delay Mode (for games): activated by triple touching the sensor on any headphone, sound latency is reduced to 88 ms (versus the standard 120-150 ms).
• 🔊 Transparent mode: Double tapping on the left earpiece includes external microphones to hear surrounding sounds.
• 📞 Call Auto Response: If you turn on the settings MIUI, Headphones will automatically respond to incoming ones after 3 seconds of call.
• 🔋 Energy saving: if you leave headphones in the case for 5+ without connection, they will go into deep sleep (energy consumption will decrease to 0.1 mA / h).

To customize these functions:

1. Connect the headphones to the Xiaomi smartphone.
2. Open Settings → Bluetooth.
3. Click on the gear icon next to Mi True Wireless Earphones 2 Pro.
4. Select the options you want (such as Low Latency or Auto Response).

💡

Low latency significantly reduces game response time, but increases battery consumption by 10 to 15 percent. Use it only when needed.

6. Common Problems and Solutions

Even after a successful connection, users encounter typical bugs.-5 problems and ways of eliminating them:

Critical error: if the headphones are connected, but immediately disconnected through 1–2 Seconds, this indicates a firmware conflict with the version Android/iOS. Decision:

1. Reset your headphones (see Section 3).
2. Update the firmware through Mi Home.
3. If the problem persists, roll back the Android version (or use another smartphone for the test).

💡

If the headphones start to hold the charge worse, try to "accelerate" the battery: completely discharge them before turning them off, then charge to 100% without interruptions. Repeat the cycle 2-3 times.

7. Compatibility with other devices

Xiaomi Air 2 Pro officially supports Android 8.0+ and iOS 10+, but there are nuances:

• 📱 Android (not Xiaomi): All features work, but you’ll need a device with a firmware update MIUI.
• 🍎 iPhone/iPad: There is no support for low latency and clear sound, and there may be no battery indicator.
• 💻 Windows/macOS: Headphones connect like a standard Bluetooth headset, but without advanced features.
• 🎮 Game consoles (PS5, Nintendo Switch: Supported only in sound mode (microphone not working).

To connect to Windows 10/11:

1. Open the settings → Devices → Bluetooth.
2. Click Add Add the device → Bluetooth.
3. Select Mi True Wireless Earphones 2 Pro from the list.
4. If the sound is distorted, install the AAC codec manually (in device properties).

Note: on macOS, you may need to disable the Automatic Sound Switch feature in Bluetooth settings, otherwise the headphones will spontaneously connect to the iPhone.

Care and extension of service life

The average life of the Xiaomi Air 2 Pro is 2-3 years if properly operated.

• 🚫 Do not store headphones in the cold or in direct sunlight (optimum temperature: 0-35).°C).
• 💧 Avoid getting moisture despite what you have said. IPX4 (spray-only).
• 🔋 Charge your case to 100% at least 1 time a month, even if you do not use headphones.
• 🧼 Clean the speakers and contacts once every 2 weeks with a cotton swab with isopropyl alcohol.

A common mistake is to use headphones while charging a case, which leads to:

• Overheating of the battery (reduces capacity by 10-15% per year).
• Synchronization failures between headphones.
• Contact damage due to microvibrations.

💡

Keep your headphones in a case, which not only protects them from damage, but also prevents discharge. In a case, headphones consume 5 times less energy than in the open air.

FAQ: Frequent questions about Xiaomi Air 2 Pro