How to Turn on Xiaomi Mouse: A Detailed Guide to All Models (2026)

Xiaomi’s wireless mice are well-deservedly popular for their combination of compactness, stylish design and advanced features, but even with such devices, users sometimes have difficulties — especially when it comes to first turning on or connecting after a long period of downtime. Unlike wired counterparts, the Mi Bluetooth Mouse, Mi Silent Mouse or Xiaomi Dual Mode Wireless Mouse wireless mice require the right sequence of actions to activate.

In this article, you will find step-by-step instructions for all current Xiaomi mouse models, including features of switching on via Bluetooth and other devices. USB-We'll also look at the common bugs that make the device fail to respond to the presses, and we'll give you a diagnostic guide for malfunctions. If your Xiaomi mouse isn't powered on or defined by the system, here's the solution.

Note that the procedure may vary slightly depending on the model and firmware version. For example, the Mi Bluetooth Mouse 2 has a different pairing algorithm compared to the first version, and the Xiaomi Dual Mode Wireless Mouse supports two connection modes, all of which we took into account in the manual.

1. How to determine the model of your Xiaomi mouse

Before you start switching on, it is important to know exactly the model of the device, which depends on the activation methods and possible nuances of the connection. Xiaomi mice can be divided into several main lines:

• 🔹 Mi Bluetooth Mouse (1st and 2nd versions) – works only on Bluetooth, without USB-receiver.
• 🔹 Mi Silent Mouse – a silent model with Bluetooth 5.0 support and low power consumption.
• 🔹 Xiaomi Dual Mode Wireless Mouse – supports both Bluetooth and connectivity via Wireless Mouse USB-2.4 GHz receiver.
• 🔹 Xiaomi Mi Portable Mouse – a compact folding model for laptops.
• 🔹 Redmi Wireless Mouse – budget version with basic features.

To find out the exact model:

1. Look at the box of the device – the name is usually indicated on the front side.
2. Turn the mouse over and find a sticker with the serial number and model name (e.g., the name of the model, MDZ-09-DB For the Mi Silent Mouse).
3. If there is no sticker, check in the Mi Home app (if the mouse has already been connected before).

⚠️ Note: Some models (e.g. Xiaomi Dual Mode Wireless Mouse) have a connection mode switch on the bottom panel. If the mouse doesn't respond, make sure the switch is set to the correct position (BT for Bluetooth or 2.4G for USB-receiver).

If you can’t identify a model, use the general guide from the following section – it will work for most Xiaomi devices.

2. Universal instruction for switching on the Xiaomi mouse

For most models, the on-boarding process comes down to a few basic steps, and below is a step-by-step guide that will suit the Mi Bluetooth Mouse, Mi Silent Mouse and other popular devices.

Charge the mouse (if the battery is drained)|Check the position of the power switch.|Make sure that USB-receiver inserted (for models with 2.4G)|Disconnect other wireless mice from your computer

-->

Step 1: Charging or replacing the battery

If the mouse does not respond to the pressing, check the level of charge:

• 🔋 For models with built-in battery (such as Mi Silent Mouse), connect your mouse to charging via USB-C or Micro-USB (depending on the model) The charging indicator should light up in red or orange.
• 🔋 For removable battery models (such as the Redmi Wireless Mouse), open the compartment on the bottom panel and check if the batteries are installed (usually 1 battery is required). AAA).

Step 2. Activate the mouse

After the food check:

1. Turn the mouse over and find the on button (usually located under the wheel or on the bottom panel).
2. Hold the button. 3-5 seconds until the indicator starts flashing (blue or green indicates readiness to pair).
3. For models with USB-Receiver (e.g. Xiaomi Dual Mode Wireless Mouse) insert the receiver into the USB-port of the computer before turning on the mouse.

Step 3: Connect to the device

Depending on the type of connection:

• 🖥️ For Bluetooth: Open the settings → Devices → Bluetooth (Windows) or System settings → Bluetooth (macOS). Find a device called Mi Mouse, Xiaomi on the list. BT Mouse or similar. Press Connect and confirm pairing.

USB-receiver (2.4G)

1. Put the receiver in. USB-port.
2. Wait for the automatic driver installation (usually takes a lot of time) 10-30 seconds).
3. Reboot the mouse if it is not immediately determined.

3. Features of inclusion of popular models

Despite the general principles, each model of the Xiaomi mouse has its own nuances, below we will discuss the most common devices and their features.

Mi Bluetooth Mouse (Versions 1 and 2)

This model works only on Bluetooth and does not have USB-The main differences in the versions:

To enable Mi Bluetooth Mouse 2:

1. Hold the button under the wheel for 5 seconds until the indicator starts flashing green.
2. If the mouse has been paired before, it will automatically connect to the last device.
3. To reset the pairings, hold the 10 seconds button (the indicator will change color to red).

💡

If the Mi Bluetooth Mouse 2 doesn’t connect to the new device, remove it from the list of conjugated gadgets on your old computer or smartphone first, which will eliminate conflicts when you reconnect.

3.2. Xiaomi Dual Mode Wireless Mouse

This model supports two connection modes:

• 📶 Bluetooth 5.0 – for connecting to laptops, tablets and smartphones.
• 📡 2.4G — through USB-PC receiver without Bluetooth.

Switching between modes is carried out by a physical switch on the bottom panel:

• BT — Bluetooth.
• 2.4G — regime USB-receiver.

Initiation in mode 2.4G:

1. Put the switch in position. 2.4G.
2. Put it in. USB-port-to-port.
3. Press the switch on the mouse (the indicator will light up in green).
4. If the mouse is not detected, try restarting the computer or inserting the receiver into another one. USB-port.

⚠️ Attention: USB-Xiaomi Dual Mode Wireless Mouse is a miniature size and easily lost. Store it in a special compartment on the bottom of the mouse (if designed). If you lose the receiver, the mouse can only be used in Bluetooth mode.

3.3. Mi Silent Mouse

This model features silent buttons and optimized power consumption.

• 🔋 Has a built-in battery capacity of 300 mAh (charging through the USB-C).
• 🔄 The power button is located under the wheel and requires 3 seconds to be held to activate.
• 📱 Supports fast switching between three devices (hold left) + right-hand button simultaneously to change channel).

If the Mi Silent Mouse is not enabled:

1. Check the battery charge (when the indicator flashes red).
2. Make sure that the mouse is not in sleep mode (mov it or press any button).
3. If the indicator does not respond, try resetting by holding the 10 seconds button.

Typical problems and their solutions

Even when switched on correctly, Xiaomi's mouse may not work properly, so let's look at some of the most common problems and how to fix them.

Mouse not switched on (indicator not burning)

Possible causes and solutions:

• 🔋 Battery or battery drained: Connect your mouse to charging on 15-20 For models with removable batteries, replace the batteries with new ones.
• 🔌 Stick the power button: Carefully tap the mouse body or blow the button with compressed air. Try pressing the button several times in a row - sometimes contacts oxidize.
• 💻 Problems with USB-port (for models with receiver): Try inserting the receiver into another port (preferably) USB Check the receiver on another device (e.g. laptop).

The mouse is switched on but not connected to the computer.

If the indicator flashes, but the mouse is not defined by the system:

• 🖥️ For Bluetooth: Remove the mouse from the list of associated devices and connect again. Update the Bluetooth drivers on your computer (via Device Manager). Check if Bluetooth is enabled in the system settings.
• 🖥️ For USB-Receiver: Restart the computer with the receiver connected. Try to turn off the other ones. USB-Devices (Power conflict possible) Check if they are disabled USB-port BIOS (PC-worthy).

⚠️ Warning: Some Windows 11 laptops have problems automatically connecting Xiaomi mice after they're out of sleep.Solution: Turn off the Power Savings feature for USB-power-setting.

The mouse connects but is running with delays

If the sign is moving in jerks or is late:

• 📶 For Bluetooth: Make sure the distance between the mouse and the computer is less than 10 meters. Turn off other Bluetooth devices (earphones, keyboards) that may cause interference. Check if there is a microwave or other equipment nearby that creates interference.
• 🖥️ For USB-Receiver: Move the receiver closer to the mouse (e.g., use the receiver). USB-Connect the receiver to the port on the back of the system unit (less interference).
• 🖱️ General recommendations: Check the surface on which the mouse is used (optimally, a laser mouse mat). Update the mouse drivers through Device Manager or the official Xiaomi website.

5. How to reset the Xiaomi mouse settings

If the mouse is not working properly or is not connecting to new devices, it may be necessary to reset the settings.

5.1 Reset for Mi Bluetooth Mouse and Mi Silent Mouse

For these models, the reset is performed by holding the switch:

1. Turn off the mouse (if it is on).
2. Hold the power button. 10-15 seconds until the indicator flashes red (or goes out and lights up again).
3. Release the button and the mouse will reset all pairings and return to factory settings.
4. Now you can connect it to a new device as if it were the first time.

5.2 Reset for Xiaomi Dual Mode Wireless Mouse

For this model, the reset depends on the mode:

• 📶 Bluetooth Mode: Transfer the switch to position BT. Hold the switch on for 10 seconds until the indicator starts to blink quickly.

Regime. 2.4G:

1. Put the switch in position. 2.4G.
2. Remove and re-insert. USB-receiver.
3. Press the switch on the mouse – the connection must be restored automatically.

Once reset, Xiaomi’s mouse will be ready for a new connection. If problems persist, check the device on another computer or laptop to help identify the fault.

💡

Resetting the mouse Xiaomi removes all the associated devices, after which the mouse will have to reconnect to all the gadgets that it has worked with before.

6.How to check the performance of the Xiaomi mouse

If you're in doubt about whether a mouse is working, run a simple diagnostic that will help you determine if the problem is in the device itself or in the settings of the computer.

Checking the connection

Follow this algorithm:

1. Connect your mouse to another device (laptop, tablet, or even a smartphone with support) OTG).
2. If the mouse is working, the problem is with the main computer settings.
3. If the mouse does not work on any device, a hardware malfunction is likely.

Verification of the motion sensor

To make sure that the mouse sensor is working:

1. Turn the mouse over and shine a flashlight into an optical sensor (a small window at the bottom).
2. If the sensor is in good working order, you will see a red glow (for laser mice, purple).
3. Try to move your mouse on different surfaces (rug, table, sheet of paper).

If the sensor is not shining, it is possible that the mouse is discharged or the sensor has broken, in which case, try charging the device or contact the service center.

Diagnostics of buttons and wheels

Check the mechanical elements:

• 🖱️ Buttons: Press left, right and middle buttons. These should be pressed with a light click (except Mi Silent Mouse, where the buttons are silent).
• 🌀 Kolesico: Scroll it up and down - the movement should be smooth, without jamming.
• 🔍 Click-through verification: Open the text editor and check if clicks are logged.

⚠️ Note: If the Xiaomi mouse buttons become "sticky" or require excessive force to press, this may indicate the entry of dust or moisture inside the case.In this case, it is recommended to gently clean the mouse with compressed air or contact the service.

7. Xiaomi's mouse firmware update

In rare cases, unstable mouse performance is associated with outdated firmware. Software updates can improve compatibility with new versions. Windows/macOS However, not all Xiaomi models support firmware updates.

7.1 Which mice support the update

At the moment, the possibility of updating the firmware has been confirmed for the following models:

• 🔹 Mi Bluetooth Mouse 2 (via Mi Mouse).
• 🔹 Xiaomi Dual Mode Wireless Mouse (Bluetooth Mode Only).

For other models, firmware updates are not provided by the manufacturer.

7.2 How to update firmware

For Mi Bluetooth Mouse 2:

1. Download the official Mi Mouse app for Windows or macOS from Xiaomi’s website.
2. Connect the mouse to the computer via Bluetooth.
3. Launch the app and wait for it to identify the mouse.
4. If an update is available, follow the on-screen instructions (confirmation and waiting are usually required). 2-5 minute).

Xiaomi Dual Mode Wireless Mouse:

1. Put the mouse in Bluetooth mode.
2. Put her on the computer.
3. Use the Xiaomi Bluetooth Device Updater app (available on the official website).

8. Frequently Asked Questions (FAQ)