The first inclusion of Mi Band 6: how to properly configure the Xiaomi bracelet from scratch

The Xiaomi Mi Band 6 fitness bracelet is one of the most popular gadgets for tracking activity, sleep and health. But even such a simple device can raise questions for a beginner: how to turn it on, connect it to the phone and avoid typical errors when you first set up.

Many users face problems already at the turn-on stage: the bracelet does not respond to pressing, does not connect to the smartphone or quickly discharges. We will analyze each step in detail, pay attention to hidden functions (for example, activation). NFC Or setting up notifications, and explaining why some actions may not work, and focusing on compatibility with different smartphone models and versions. Android/iOS.

If you just purchased the Mi Band 6 or plan to do so, keep this instruction, which will be useful not only for the first turn on, but also for resetting or reconnecting the bracelet to a new phone.

Unpacking and external inspection of the bracelet

Before the first turn on, carefully inspect the Mi Band 6 trim. The box should include:

• 📦 Fitness bracelet itself (capsule with display)
• 🔋 Charging cable (with magnetic connector)
• 📄 Short instructions in several languages (including Russian)
• 🔄 Band (usually black, but may vary depending on version)

Note the labeling on the capsule: it shows the model (M2129B1 for the global version) and the serial number. If you bought the bracelet from a non-official store, check that the box has a hologram sticker - this is a sign of the original device. Counterfeiting often gives the lack of magnetic attachment on the charging cable or too light weight capsule (the original weighs about 12.8 g).

Important: if the display bracelet already burns icons or inscriptions before connecting to the phone – this may mean that the device has been used before, in which case it is better to reset it to the factory settings (we will discuss this below).

⚠️ Warning: Don't try to open the bracelet capsule, it voids the warranty. All buttons and connectors are hidden under a removable strap that is attached to the latches.

Charging before first activation

Even if the bracelet is new, it can be discharged after long storage, the minimum charge to turn on is about 10%, but it is better to charge up to 50-70% before setting up.

1. Remove the strap from the capsule by pulling it to the side (hear the click).
2. Bring the capsule to the magnetic connector of the charging cable - it should "stick" automatically.
3. Connect the cable to the power source (USB-port 5V/1A).

The bracelet will display a charging indicator, which is a battery animation. 1,5-2 If the indicator doesn't appear:

• 🔌 Check the density of the capsule to the connector (should be heard clicking).
• 🔄 Try another one. USB-port or cable (sometimes the problem is a faulty cord).
• 📱 Make sure the power supply is giving out enough current (some of the USB-PC ports give less than 0,5A).

If the bracelet does not respond to charging at all (no indication, the capsule does not warm), this may indicate a defect in the battery or damage to the contacts.

Including the bracelet and basic setting

After charging, you can start turning on.

1. Put the capsule back in the strap (the snap of the fixation should be heard).
2. Touch the touch button below the screen and hold it for 3-5 seconds until the Mi logo appears.
3. Release the button and the bracelet will turn on and start searching for a Bluetooth connection.

On the screen, you'll see a welcome message in English or Chinese (depending on the regional firmware). If the language is not displayed correctly, don't worry - it can be changed later through the app. The main thing at this stage is to make sure that the bracelet responds to touch and flips through the menu.

Make sure that the smartphone is enabled Bluetooth

Download the Mi Fitness app from the official store (App Store/Google Play)

Charge the bracelet to at least 30%

Check the compatibility of the phone (Android 6.0+/iOS 10.0+)

-->

If the bracelet is not activated:

• 🔋 Check the charge level (possibly the charging indicator worked incorrectly).
• 🔄 Try hard reset: connect the bracelet to charging and hold the button 10-15 A few seconds before the logo appears.
• 📱 Make sure your smartphone doesn’t block new devices from connecting (for example, due to power saving mode).

Installation and configuration of the Mi Fitness application

For full operation of Mi Band 6 you need the application Mi Fitness (formerly Mi Fit).

• 📱 Google Play for Android
• 🍎 App Store for iOS

After installation:

1. Open the app and select Register (you can use Xiaomi Account, Google or Apple ID).
2. Click Add Device → Select Bracelet → Mi Smart Band 6.
3. Allow the application to access Bluetooth, notifications and geolocation (the latter is necessary for the pedometer to work correctly).

The app will suggest updating the bracelet firmware — agree, as the new versions fix bugs and add features. The update will take 5-10 minutes and require a stable Internet connection. Do not interrupt the process, otherwise the bracelet may stop turning on!

Synchronization of the bracelet with the phone

Once the application is successfully connected, it will suggest synchronizing the data.

• 🔄 Exchange of time and time zone information.
• 📊 Adjust the basic parameters (gender, age, weight – for the correct calculation of calories).
• 🔔 Activation of notifications (calls, SMS, messenger).

In the bracelet menu (Profile → Mi Smart Band 6), you can configure:

Important for iPhone: Due to iOS limitations, the bracelet cannot show notification text - only the app icon and vibration. On Android, the text is displayed in full.

⚠️ Warning: If the bracelet starts to discharge quickly after synchronization (more than 20% per night), check the notification settings. Frequent vibration when messages from social networks greatly reduces the time of operation.

Configuring additional functions

Mi Band 6 supports many hidden features that are not activated by default.

1. Monitoring of heart rate and SpO₂

To enable automatic pulse and blood oxygen measurements:

1. In the app, go to Profile → Mi Smart Band 6 → Heart Rate Monitoring.
2. Select Auto mode and set the interval (e.g. every 30 minutes).
3. For SpO₂ Enable the option in the Settings menu → SpO₂.

Measurements are only taken at rest. If the data seems inaccurate, remove the bracelet and put it tighter (but don't squeeze your hand).

2. Music management

The bracelet can switch tracks and adjust volume on the smartphone:

• 🎵 Enable the function in Settings → Managing music.
• 🔊 On the bracelet, swipe up on the home screen and select the Music icon.

3. Quick responses to messages (Android)

On Android, you can configure template responses to SMS and messengers:

1. In the app, go to Notifications → Quick answers.
2. Add up to 10 templates (e.g., “I’ll call you back,” “I’m busy right now”).
3. When you receive a message on the bracelet, swipe left and select the answer.

1. whether the vibration is turned on in the phone settings (not in silent mode).

2. Has the messenger app been added to the blacklist in Mi Fitness → Notifications?

3. whether the bracelet sits tightly enough on the arm (weak fit can block the motion sensor).-->

Typical errors and their solution

Even with the right setup with the Mi Band 6, there can be problems.

If the bracelet is frozen (does not respond to touch, the screen does not change):

1. Put him on charge.
2. Hold the button for 20-30 seconds until it restarts.
3. If it doesn’t help, reset your settings through Mi Fitness → Profile → Reset.

💡

Before resetting your settings, be sure to sync the data with the application – otherwise the activity history will be lost!

FAQ: Frequent questions about Mi Band 6