The appearance of a new fitness tracker in the house is always a pleasant excitement, especially when it comes to flagship models like Xiaomi Smart Band 9. However, after removing the device from the box, many users are faced with the fact that the screen remains black and the buttons do not respond to pressing. This is normal, since gadgets come with a minimum battery charge to keep the battery safe during storage.
The process of activating the Mi Band 9 is radically different from the activation of conventional electronic devices and requires a certain sequence of actions. You will need not only to press a button, but also to properly prepare the smartphone for the first pairing. In this article, we will discuss in detail each step, from unpacking to setting the first notification.
Note that the activation algorithm may vary slightly depending on the version of your phone’s operating system (Android or iOS), but the basic principles of working with the Zinc Alloy case and touch screen remain the same for all regions.
Primary charging and device preparation
The first thing to do before you try to power the device is to provide power. Manufacturers often leave a minimal charge, which may not be enough even to ignite the logo on the first run. Connect the Xiaomi Smart Band 9 to the power source using a magnetic cable from the kit.
Make sure the contacts on the back of the tracker and the cable fit tightly together. Magnetic charging should be securely fixed, and on the device screen (if the charge was enough) or on the smartphone screen (when connecting to Power Bank) will show an indication of the process. Leave the gadget on charging for at least 15-20 minutes.
⚠️ Warning: Do not use fast charging adapters from laptops or powerful power supplies with non-standard voltage protocols. 9 Standard ports are best suited USB computer-power 5V/1A.
When charging, the device can heat up, which is a perfectly normal reaction of a lithium polymer battery. If the indicator on the screen does not light up immediately, do not panic - let the battery wake up for 10-15 minutes. Only after the appearance of the Mi logo can you move to the next step.
💡
If the bracelet has been in storage for a long time, it may need to be held on charge for up to 1 hour before first turning on to activate the chemical processes in the battery.
Installation and configuration of the Mi Fitness application
The Xiaomi Smart Band 9 is a limited, time-date-only app, and a bundle with a smartphone is needed to work properly. Mi Fitness is currently the main and most stable app (formerly known as Zepp Life in some regions, but Mi Fitness is recommended for version 9).
Download the app from the official store: Google Play for Android or App Store for iOS. Once installed, open the app and register or log in to your Xiaomi Account. This is a critical step, since without an account, data synchronization and profile settings are impossible.
- 📱 Register an account using a phone number or email.
- 🌍 Select the correct region of residence in the application settings.
- 🔒 Allow all requested accesses: geolocation, Bluetooth, notifications and background.
- 🔗 Turn on Bluetooth on your smartphone before searching for your device.
The app interface may seem overloaded, but to turn on the bracelet, we only need the Device tab.Click on plus (+) in the upper right corner to add a new gadget.The system will automatically start searching for available Bluetooth devices nearby.
☑️ Preparation for interface
The process of pairing with a smartphone
When the app finds the Xiaomi Smart Band 9, a request to pair with a smartphone image will appear on the tracker screen, which is a security mechanism that prevents you from connecting to other devices. You need to confirm the action by touching the green tick on the bracelet screen.
Once confirmed on the tracker, the notification will also be sent to your phone, click "Plug" or "Plug" in the application interface, the process of establishing a secure communication channel can take from 10 to 30 seconds, during which time do not move the smartphone from the bracelet.
| Phase | Action on the bracelet | Action on a smartphone |
|---|---|---|
| Search | Waiting (screen active) | Scanning in the annex |
| Request. | Tick the tick. ✅ | Waiting for confirmation |
| Confirmation | Vibration of success | Press "Connect" |
| Synchronization | Loading the dial | Uploading profiles |
If there is an error in the process, try restarting Bluetooth on your phone. Sometimes the system requires several attempts to properly shake the protocols. Make sure that the Bluetooth version on your smartphone is at least 5.0, although the Mi Band 9 is compatible with older versions, the stability of the work can be reduced.
Primary customization and personalization
After the successful connection, Xiaomi Smart Band 9 will offer a software update. This is a mandatory procedure for new devices, as the factory firmware may contain bugs or not have current language packages.
Next, you need to adjust your personal data: height, weight, age, and activity targets, which are critical for calorie expenditure and sleep quality, and Mi Fitness's algorithms use this data to plot individual activity schedules.
Pay special attention to the screen setting. Xiaomi Smart Band 9 has a bright AMOLED-60Hz refresh rate display. You can select the always-on screen mode (AOD) Or activate the wrist lift to turn on the backlight, and there are more than 150 dials available in the app store.
⚠️ Note: When you turn on the Always On Display function, battery life is reduced by about one 30-40%. It is recommended to use this function only when necessary.
Don't forget to set up notifications. In the app, you can choose which apps will duplicate messages on your wrist, which helps you keep important calls or messages from messengers from missing, without constantly taking your smartphone out of your pocket.
Secret functions of dials
Basic functions and navigation on the interface
The Mi Band 9 is based on a combination of a touch screen and a single physical button (or a press sensitive area, depending on the body modification), allowing you to move between widgets: up the app menu, down the quick access panel, left-right activity cards.
You'll find tracking workouts, heart rate monitoring, blood oxygen (SpO2) and stress on the menu. To start the workout, you'll need to select the appropriate mode. The device automatically recognizes running, walking and rowing, but for accuracy, it's better to manually run the mode through Sport.
- 🏃 Training: Over 150 modes, including swimming (5 ATM).
- ❤️ Health: Round-the-clock monitoring of heart rate and sleep.
- 🌬️ SpO2: Measurement of blood oxygen saturation.
- 🧘 Breathing: Exercises to Relieve Stress.
An important feature of the 9th model is the improved sleep tracking algorithm, which now distinguishes between the phases of superficial and deep sleep, as well as daytime naps (Nap).The data is synchronized instantly when an app is opened, providing up-to-date statistics at any time.
💡
The main navigation habit: Swipe up opens all apps, swipe down - quick settings (lightlight, alarm, "do not disturb"). Remember this so as not to wander through the menu.
Solving problems with inclusion and connection
Sometimes users are faced with a situation where the bracelet is not turned on or visible to the phone.If the screen is black even after charging, try connecting the device to the computer through a phone. USB-Computers often produce a stable voltage that can "wake up" the power controller.
If the bracelet vibrates but the screen doesn't light up, it may be the display plume or the module itself that's damaged, and you need to be diagnosed at the service center, but most often the problem is software getting stuck. To reboot, press the touch zone (or button) for 15-20 seconds.
If you have connection issues, remove the device from the Bluetooth list in your phone’s settings, then remove it from the Mi Fitness app and try to re-spoil.Resetting the network settings on your smartphone can also help if communication protocols conflict.
⚠️ Warning: Do not try to disassemble the case Xiaomi Smart Band 9 yourself. leakage will lead to loss of water protection IP68 and denial of warranty service.
In rare cases, a complete factory reset is required, and this can be done through the bracelet menu: Settings → System → Reset. After this procedure, all data will be deleted, and the device will need to be reconfigured as new.