How to turn on the electric scooter Xiaomi: instructions for all models

First Including: What You Need to Know

Xiaomi scooters are some of the most popular vehicles in the city, but even with them, beginners have questions, such as how to turn on the device correctly so as not to damage the electronics or battery. In this article, we will examine all the nuances from the basic activation of the button to the solution of possible power problems.

It's important to understand that the on-line process can vary slightly depending on the model. Xiaomi M365, Pro 2, 4 Pro or Electric Scooter 3 Lite have different indicators, button location and even sound signals. But the general principle remains the same: first check the charge, then activate the power, and then start moving.

If the scooter doesn't respond to the push of the power button, don't panic. 80 percent of the time, the problem is solved by simply rebooting or checking the contacts, and then we'll go through every step from preparing for the first run to diagnosing the malfunction.

Preparation for activation: check before the first launch

Before you press the power button, make sure the scooter is ready to go, which is especially important if you've just unpacked a new model or haven't used the device in months.

• 🔋 Battery level. Minimum threshold for switching on — 10-15%. If the indicator shows less, first connect the charger to the 2-3 hour.
• 🔌 Contact status. Check if the charging connector is tightly inserted (if the scooter was recharging), oxidation or dirt on the contacts can block the power supply.
• 🛑 Wheel lock. Make sure the brake lever is not locked in the pressed position, and that automatically shuts off the motor.
• 📱 For Bluetooth models (Pro 2, 4 Pro) it is recommended to install the official Mi Home app in advance.

If you have stored the scooter at low temperatures (such as in a garage in winter), let it warm up to room temperature for at least 30 minutes. Xiaomi lithium batteries can temporarily lose up to 30% of capacity at temperatures below +5 ° C, which leads to false discharge protection.

Basic method: switching on the power button

The simplest and most versatile method is to use a physical button, which is located on the steering column on the right (for most models), and is usually illuminated in white or blue when activated.

1. Press and hold the power button for 2-3 seconds until you hear a beep (one short beep).
2. The display (if any) will display the charge level, and the models without the screen (M365) will light up the LED under the button.
3. Wait until the self-diagnosis is complete (it takes ~5 seconds), at which time the motor may twitch slightly - that's normal.
4. After the second beep, the scooter is ready to move. Press the gas once to make sure it's working.

If the button does not respond:

• 🔄 Try pressing it 10 times in a row at intervals of 1 second – this will reset the possible lock.
• 🔌 Connect the charger for 10 minutes, even if the battery seems charged (sometimes the controller resets errors when applying the voltage).

Enable via the Mi Home app (for smart models)

Modern Xiaomi scooters (Pro 2, 4 Pro, Electric Scooter 3) support remote control via the Mi Home app, which is useful if the physical button is faulty or you want to turn on the scooter remotely.

1. Install the Mi Home app (available for Android and iOS).
2. Sign up or sign in to your Xiaomi account (required for device sync).
3. Turn on Bluetooth on your smartphone and click Add Device (+) in the app.
4. Select the category Transport → Electric scooter and follow the instructions on the screen.
5. After pairing, the device menu will appear the option to turn on / off.

Note: Remote powering only works at a charge level of ≥20%. If the battery is discharged more, the application will show a "Low Battery" error, and the scooter will only turn on after recharging.

Indicators and sound signals: what they mean

When you turn on the scooter, it gives you audible and light signals that help you diagnose your condition.

If the scooter is making a continuous squeak or if it shows an E05 error, it indicates a problem with the braking system.

• 🛑 Whether the brake lever is in the pressed position.
• 🔧 Is the brake cable weakened (adjusted by a screw on the handle).
• 🔋 Is the battery enough (at a discharge below 5% the brakes can be blocked).

💡

If the scooter is on, but does not drive when pressing the gas, check the speed limit mode. On some models, it is activated by double pressing the power button (the turtle icon will appear on the display).

Frequent problems and their solutions

Even when switched on correctly, the scooter can behave unexpectedly, and here are the most common scenarios and ways to eliminate them:

⚠️ Note: If the scooter is turned on but immediately switched off through 2-3 This is a sign of critical battery discharge. Don't try to start it on the go, plug it into the original charger on the back. 4+ hour.

The scooter does not respond to the button

• 🔌 Check charging contacts: oxidation or contamination can block the supply of power.
• 🔄 Make a hard reset: hold the power button for 10 seconds, then release and try to turn it on again.
• 🔋 If the scooter was lying unused for a long time, the battery could go into "deep discharge." You will need a special charger with the function "boost" (call the service).

It's on, but it's not going.

• 🚦 Check to see if child mode is activated (speed limit to 10 km/h) and is turned off by triple pressing the power button.
• 🔧 Inspect the wheel for mechanical locks (pebbles, dirt in the brake disc).
• 📱 Update the firmware through Mi Home – in older versions of the software, engine control errors are possible.

Unintentional shutdown during movement

• 🔋 It's probably going to be overcharging. 100% Check the container (if the scooter is turned off) 30-40% battery, the battery needs to be replaced).
• 🌡️ Controller overheating (often in summer) Let the scooter cool down 15-20 minute.

💡

If the scooter is on, but the display is E03 error, this indicates a malfunction of the speed sensor. Do not operate the device - contact the service for diagnosis.

Safety during onset and operation

Incorrectly turning on or ignoring the scooter signals can lead not only to failure, but also to emergency situations.

• 🛡️ Always check the brakes before you start. To do this, push the scooter forward and press the brake lever sharply, the wheels must lock instantly.
• 👀 If the red LED lights up after switching on, no movement until the error is corrected.
• 🚫 Do not turn on the scooter in enclosed spaces (garage, elevator). In rare cases, a faulty battery can emit harmful gases.
• 🔒 Use a mechanical lock when parking, and even a scooter that's turned off can be stolen by simply rolling it along.

⚠️ Warning: If the scooter starts to turn on with a delay after a fall or impact or makes uncharacteristic sounds (screaming, crackling), immediately stop operation.

Remember that Xiaomi electric scooters are equipped with an automatic shutdown system when:

• Exceeding the maximum load (usually 100-120 kg depending on the model).
• Falling speed below 3 km/h for 10 seconds (tilt protection).
• Slight braking (inclination sensor is activated).

FAQ: Answers to popular questions