How to turn on Xiaomi watch after resetting settings

The situation when a smart gadget suddenly stops responding to commands or requires a complete restart of the system is familiar to many wearable electronics owners. If you are looking for a way to turn on a Xiaomi watch after resetting, then your device is now in a deep sleep state or waiting for initialization. Unlike smartphones, where the startup process is obvious, wearable devices often do not have physical on buttons in the classical sense, which causes confusion among users.

The recovery of the gadget depends on the model and the type of reset performed, it could be a software Hard Reset through the menu, a forced reboot or a full battery discharge, which the system perceives as a critical state.

In this article, we will take a detailed look at the algorithms for different scenarios, from simple models like the Mi Band to full-fledged Xiaomi Watch with an operating system, you will learn how to distinguish a software failure from a hardware malfunction and what steps to take if the screen remains black.

Physical connection and primary charging

The most common but often overlooked reason for the lack of response is the critically low battery charge. After a deep discharge or system reset, the device takes time to store the minimum amount of energy to start the power controller. If the watch has been idle for several months or was discharged to zero before reset, it will not turn on instantly.

You need to use an original charger or certified equivalent with the appropriate currents. Connect the gadget to the network and leave it alone for at least 15-30 minutes, even if nothing happens on the screen. In some models, the charge indication only appears after a certain voltage threshold is reached.

⚠️ Attention: If you use wireless charging, make sure the contacts on the back of the watch and on the charger are perfectly clean.Oxidation or contamination can block power transmission, creating a false impression of malfunction.

It's important to check the integrity of the charging cable and the power supply, and sometimes the problem is not with the watch itself, but with the power source. USB-port or adapter to eliminate this factor.

Algorithm of inclusion for models without screen (Mi Band)

Fitness trackers in the Mi Band series (e.g., 4, 5, 6, 7, 8) do not have a classic on button, because they are based on touch control or button-taps. After resetting or discharging, they go to standby mode. To "wake" the tracker, you need to perform a long press on the touch area.

Place your finger on the center of the screen and hold it for 5-10 seconds, and in some cases, you need to repeat this action several times at intervals, and if the screen catches fire and shows the Mi logo or dial, then the device has successfully started.

It is worth considering that older models can only react to the connection to the charger. the drop-shaped module must be removed from the strap and inserted into the charging port - this action often serves as a trigger for the device to turn on.

• 🔋 Long-term pressing on the sensory zone (5-10 seconds).
• ⚡ Connecting to the charger for activation.
• 📱 Sync with Mi Fitness or Zepp Life app.
• 🔄 Reconnect the module in case of poor contact.

Starting a smart watch with a button (Xiaomi Watch, S-series)

Full-fledged smartwatches such as the Xiaomi Watch S1, Xiaomi Watch 2 or Color are equipped with a physical control button. After resetting to the factory settings, the device turns off completely.

Hold time can vary from 3 to 7 seconds depending on the firmware version. If the watch has been reset via the menu, it can immediately go to the language selection screen. If there is a hardware failure, you may need to connect to the charging to start.

Sometimes the system can get stuck in a reboot cycle, so try the combination: hold the power button for about 15 seconds, and this force the hardware controller to restart and interrupt the cycle.

Note the color indication of the LED (if the model provides for it), a flashing red indicator usually signals low charge, while a flat green or white color indicates readiness for work.

The solution to the problem of "black screen" (Black Screen)

A situation where the clock seems to be on (vibration, sound) but the screen remains black is called "Black Screen of Death." This often happens after an unsuccessful update or reset, when the display drivers did not load correctly.

The first action is a forced reboot. Press the on button (or touch zone) on the 20-30 Don't let go of the button, even if you feel a vibration, wait for the logo to appear. This action releases static voltage and restarts the core of the system.

If you don't have visual contact, listen to the device, put the clock on the table and tap it with your ear pressed against the speaker, and if you hear the sound of system notifications or vibrations when you connect the charger, it means that the problem is in the screen matrix or the plume.

💡

Try putting the watch in the freezer (in a sealed bag) for 10-15 minutes.Abrupt cooling sometimes helps to "revive" the controllers if the problem is caused by overheating, but this is a temporary measure.

The initial setup process after resetting

Successful inclusion is only half the battle. Once reset, Xiaomi's watch returns to factory condition and requires re-tethering. QR-code or sentence to choose a language.

You need a companion app to get started. For modern models, this is Mi Fitness (formerly Xiaomi Wear), for older trackers, Zepp Life. Make sure that your smartphone has Bluetooth and geolocation enabled, because without them, you can't find the device.

It's important to keep your accounts in the mix. If you've used Mi Account before, you can log in to restore backups of your health data, if it's been stored in the cloud. It can take a few minutes to sync.

• 📲 Installation of the current version of the application.
• 🔐 Sign in to Mi Account or Account Google/Apple.
• 🔍 Search for the device in the list of available.
• ✅ Confirmation of code pairing on screen.

⚠️ Warning: Do not disconnect the clock from the charger during the initial setup. Updating system components may require stable power, and discharging at this point will damage the software.

Common Errors and How to Resolve Them

Even with the right actions, users are faced with errors, and one of the most common is "Device not found" or endless waiting for a connection, in which case it helps to clear the Bluetooth cache on the smartphone or remove the old profile of the device from the application before a new attempt.

Another problem is regional restrictions: Global versions of the watch may not see Chinese versions of the app and vice versa. Make sure that the app settings are the right region (often changing region to China to search and then returning to yours helps).

If the watch is turned on but immediately switched off or hangs on the logo, system files may be damaged, which will require a flashing procedure through special utilities such as Mi Flash or WearOS tools, which requires more technical knowledge.

💡

The stability of the clock after reset depends on the charging quality at the time of the first turn on and the version of the companion application.

When Professional Renovation is Required

There are situations where software methods are powerless: If after an hour of charging, rebooting and changing cables, the device remains a brick, the battery or the power controller on the board probably failed.

Also, the sign of a hardware breakdown is the swelling of the case, and if the back cover of the watch has moved away or the screen has gone "wave", the battery must be disposed of immediately, and the operation of such a device is fire-prone.

In the event of moisture (even if the watch has a certificate of moisture protection) and subsequent failure, self-activation can cause a short circuit, which will only help drying in the service and cleaning with ultrasound.