The first acquaintance with a new gadget is always a pleasant excitement, especially when it comes to the popular Xiaomi Mi Band 5. AMOLED-However, once you take the device out of the box, many users find that the screen does not light up immediately, and pressing the touch button does not cause any reaction.
This is absolutely normal, because the gadgets are delivered in deep sleep mode to save the charge of the lithium polymer battery. To revive the device, it must be activated correctly. The initial launch process does not require complex manipulations, but has its own technical nuances, ignoring which can lead to a false conclusion about the malfunction of the electronics.
In this guide, we’ll go through all the steps from checking the kit to successfully pairing with your smartphone. You’ll learn why the tracker may not respond to touch immediately after unpacking and how to avoid common mistakes when you first set up. Following the steps below, you’ll quickly turn the black rectangle into your personal digital assistant.
Checking configuration and charge status
Before you try to activate the device, make sure you remove it from the package correctly.The Xiaomi Mi Band 5 consists of two main parts: the tracker itself (capsule) and a removable strap.The capsule is usually inserted into the recess of the cardboard substrate and can be further fixed with a transparent protective film that needs to be carefully removed.
⚠️ Warning: Do not force the capsule out of the strap if it is sitting tight.Push it carefully with your finger on the inside of the strap so as not to damage the plastic mounts.
A common reason why the bracelet doesn't turn on is a fully discharged battery, and the factory charge can be used up over long storage or transportation periods, so the very first step is to put the device on charge, even if the indicators indicate the presence of power.
To do this, use a magnetic cable from the set. The contacts on the cable and on the bottom of the tracker should match. If connected correctly, the battery icon or vibration response will appear on the screen. If this does not happen, try to move the cable slightly or wipe the contacts with soft cloth.
- 🔋 Make sure that USB-The computer port or phone adapter provides sufficient current (preferably at least 0.5 A).
- 🧹 Wash with an alcohol napkin the golden contacts on the capsule before charging.
- ⏳ Leave the device on charge at least for 15-20 minutes before attempting to switch on.
It's important to understand that the magnetic connection has to be reliable.The cable doesn't have to hang around.If you're using a high-power third-party charger, it's generally safe thanks to the power controller, but it's better to use a standard USB 2.0 or 3.0 port.
📊 How do you plan to use the Mi Band 5?
For sports and running
To monitor sleep
Like a fashion accessory.
For social media notifications
Not yet.
The process of activating and waking the screen
Once you've held the bracelet on charge, you can start directly activating. Unlike smartphones, the Mi Band 5 doesn't have a physical power button, and all navigation and control is done through the touchpad at the bottom of the screen, or by lifting the wrist.
To wake up the screen, tap the touch area with your finger and hold it for 1-2 seconds. The screen should catch fire. If this does not happen, try to raise and rotate the wrist, activating the motion sensor. Sometimes the first start requires a long press (up to 5-7 seconds) on the touch area.
If the screen catches fire, you'll see the Mi Band logo or a welcome image, at which point the device is ready for further setup, however, if the screen is still black despite the lengthy charging, there may be a software failure or hardware malfunction.
What if the screen doesn’t light up after 30 minutes of charging?
If so, 30 minutes of charging and attempts to activate the screen is silent, try to connect the bracelet to another USB-You can also try to tap the sensor on the port or other cable (using the adapter). 10-15 And if it doesn't work, it's at a rhythmic pace, sometimes it helps push the power controller, and if it doesn't, it might have been defective or deeply discharged when stored more. 2 Successful inclusion is confirmed by the appearance of a choice of language or QR-This is a critical point, which is that the firmware is functioning correctly, followed by the phone, the app installation and the smartphone pairing. For full operation, setting up dials and data synchronization, it is necessary to install a special application. For the Xiaomi Mi Band 5, the main app is Mi Fitness (formerly known as Zepp Life) or Mi Fit, depending on the region and firmware version. Download the app from the official Google Play or App Store. APK-files from unverified sources, as this can lead to malware installation or tracker malfunction. Once installed, launch the app and create a Xiaomi account or log in through an existing one. The pairing process is as follows: 1. Turn on Bluetooth on your smartphone. 2. Open the app and click Add Device. 3. Select from the list of Mi Smart Band 5. 4. Confirm pairing by shaking the bracelet or pressing the sensor when a vibration or request appears on the screen. ☑️ Checklist of successful pairing Bluetooth included on phone Mi app Fitness/Zepp Life set geolocation (GPS) The bracelet is located next to the smartphone (up to the 1 Meter) Xiaomi account created and active: 0 / 5 It is important to note that during the first pairing, you may need to update the firmware of the bracelet itself. 5 before 15 You should absolutely not interrupt the upgrade process or take your phone away from the bracelet until the progress scale has reached its target. 100%. 📱 Make sure that the geolocation is enabled on the smartphone (GPS), This is an Android requirement for search. BLE-device. 🔒 Allow the application to access all requested: notifications, contacts, location. 🔄 Do not open other heavy apps while updating the bracelet firmware. After a successful connection, you need to set up a personal profile. The accuracy of calorie calculations, steps and sleep analysis depends on the data you enter. Mistakes in weight, height or age will lead to incorrect operation of the activity tracking algorithms. In the application, go to the Profile section and carefully fill in all the fields. Pay special attention to the goals by steps. By default, it can be 10,000, but you can set a more realistic figure to avoid demotivating yourself in the first days of use. Also at this stage, the preferred interface language and time format (12 or 24 hours if you plan to use the water lockout mode). There are different sets of dials available for iOS and Android users. In the Dials section, you can choose the screen design from the built-in gallery or download a new one from the online store. This is not only an aesthetic choice, but also a way to bring the right widgets to the screen, such as weather or pulse. The Mi Band 5 Basic Features Table To better understand the capabilities of your new device, check out its technical parameters. This data will help you use the functions of the tracker more effectively and understand the limitations of hardware. Value / Description Effect on use of AMOLED Screen, 1.1 inch Bright picture, always on mode (AOD) Battery 125 mAh Up to 14 days of operation in normal mode Waterproof 5 ATM (up to 50 meters) You can swim in the pool and take a shower Sensors PPG (pulse), Accelerometer Sleep monitoring, steps and pulse 24/7 Bluetooth 5.0 BLE Communication Low power, stable communication As can be seen from the table, the device has a serious set of sensors for its price. Sensor PPG (Pulse) You can easily monitor the nature of the recovery, however, it is useful to familiarize with the medical problems, even the problem after the fact that the medical test is not to be used. Let's break down typical scenarios and how to fix them. If the bracelet doesn't see the phone even though Bluetooth is on, try "forgetting" the device in your smartphone's Bluetooth settings and doing pairing again through the app. Also helps to reboot the smartphone itself, as Bluetooth drivers may work incorrectly after a long uptime. ⚠️ Warning: If the bracelet is showing the wrong time, check the time zone settings in the app. Often times get lost when traveling to other regions or when switching to winter/summer time if autosynchronization is disabled. If the sensor has stopped responding to touch, reboot the device. To do this, in the brast menu, find the System (cog icon) and select Reboot or Reset. If the menu is not available, put the bracelet on charging - some models reboot when power is connected. 📶 Weak Bluetooth signal? make sure there are no thick walls or metal barriers between your hand and phone. 💧 Dry the device immediately, do not connect to the charger until the contacts dry completely. 📉 Check if stress or high-resolution sleep monitoring is on all the time. 💡The main secret to a long life of the gadget is regular, but not excessive charging. Try not to bring the battery to 0% and do not keep on charging for days after reaching 100%. FAQ: Frequently Asked Questions: Can I swim with Xiaomi Mi Band 5 at sea? Device has 5 protection ATM, This means resistance to pressure up to 50 meters, but the sea water is aggressive because of the salt, and after swimming in the sea, be sure to rinse the bracelet with fresh water to avoid corrosion of contacts and damage to the strap. Why does the bracelet not show notifications from WhatsApp or Telegram? To work notifications, you need to give the application Mi Fitness (or Zepp Life) permission to access notifications in your smartphone settings. Also make sure that the app settings in the Notifications section are ticked against the right messengers. 5? With active use (constant monitoring of the pulse, notifications, training), charging is enough for about three hours. 7-10 In base mode with rare time checks, the device can run until 20 Is it compatible with an iPhone? Yes, Xiaomi Mi Band. 5 Compatible with iOS (iPhone) 5s and newer, iOS 10.0 The functionality is almost identical to the Android version, except for the ability to quickly respond to messages (view only).