How to install and configure Xiaomi mouse: instructions for beginners and experienced users

Xiaomi’s mice have gained popularity through a combination of affordable pricing, stylish design and advanced features. However, even with such a simple device, users often have questions about how to connect it to different devices, set up additional buttons or solve driver problems. This article will help you understand all the nuances from unpacking a new mouse to fine-tuning your needs.

Xiaomi gadgets often support multiple ways of connecting: wire, Bluetooth, and some models even Wi-Fi Direct (like Xiaomi Mi Wireless Mouse 2). We’ll look at all options, and give tips on how to optimize the mouse for games, design or office work. If you just purchased a device or encountered difficulties in using it, here you will find the answers.

1.Preparation for installation: what to do before connection

Before you start connecting, make sure you have everything you need. Complete with the mouse, Xiaomi usually goes:

• 📦 The mouse itself (check for mechanical damage)
• 🔋 Battery or battery (depending on model)
• 📡 USB-receiver (for wireless models)
• 📄 Short instructions (often in several languages, but without details)
• 🔌 Charging cable (if the mouse has a battery)

If you bought a used or unpacked mouse, look at the model — it’s usually listed on the bottom of the device (e.g. Mi Bluetooth Mouse or Xiaomi Gaming Mouse) — the way you connect and the features available depend on the model, such as gaming mice often require the installation of Xiaomi Mi Gaming Center proprietary software, and office mice work out of the box.

Important point: if your mouse is powered by batteries, use only high-quality alkaline cells (e.g. Duracell or Energizer). Cheap batteries can lead to unstable sensor operation or accidental shutdowns. For models with a battery (Xiaomi Mi Wireless Mouse 2), the first charge should last at least 2 hours - this will prolong the battery life.

⚠️ Note: Some Xiaomi mice (such as Mi Air Mouse) have touch panels instead of a wheel. If you are used to classic models, train with them beforehand - the sensitivity of such panels often requires customization.

2. Ways to connect the Xiaomi mouse: choose the best option

Xiaomi mice support up to three ways to connect, and let’s take a closer look at each of them so you can choose the one that’s most convenient for your task.

For office work or everyday use, it is better to choose Bluetooth - it is versatile and allows you to quickly switch between devices (for example, between a laptop and a smartphone). USB-receiver or wired connection – they provide minimal latency (1-5 ms vs 8-15 ms for Bluetooth).

💡

If your mouse supports both wireless methods (e.g. Xiaomi Mi Wireless Mouse 2), use the same method. USB-a receiver for a desktop PC and Bluetooth for a laptop or tablet, which will extend the battery life as Bluetooth consumes more power.

3. Step-by-step instruction: how to connect a Xiaomi mouse to a computer or laptop

Consider the universal connectivity algorithm for most models. If your mouse has specific features (such as a Mi Air Mouse with a gyroscope), additional settings will be described in the next section.

Turn on the mouse (switch on the bottom panel)

Insert batteries or charge the battery (if necessary)

Make sure that USB-Bluetooth or port on your computer is working

Update the drivers (for Windows) or check compatibility (for Windows) macOS/Linux)-->

Connection through USB-receiver (for models with support for 2.4 GHz)

1. Put it in. USB-The receiver is in the free port of the computer. USB 2.0 (black) – This provides a more stable connection than USB 3.0 (blue).
2. Turn on the mouse with a switch on the bottom panel. On most models, the indicator should flash red (connection search) and turn blue after 3-5 seconds (successful connection).
3. If the mouse doesn't work, try restarting the computer or inserting the receiver into another port, sometimes a brief press on the reset button (if you have one on the mouse) helps.

Connection via Bluetooth

1. Activate Bluetooth on your computer: 🪟 Windows: Start → Parameters → Devices → Bluetooth and other devices 🍎 macOS: System settings → Bluetooth 🐧 Linux: Use bluetoothctl command or graphical interface (e.g. Blueman)

Turn on the mouse and put it in pairing mode.

• Press the power button for 5-7 seconds (for Mi Bluetooth Mouse).
• Or use a special Pair button (if it is on the case).
• In the list of available devices on your computer, find a mouse (usually called Mi Mouse or Xiaomi). BT Mouse) and press "Connect." PIN-Enter 0000 or 1234.

4. Connecting Xiaomi mouse to smartphone or tablet

Xiaomi mice can be used not only with computers, but also with mobile devices. This is convenient for working with documents on a tablet or controlling a smartphone in DeX mode (for Samsung) or Desktop Mode (for Samsung) Xiaomi/Huawei). But there are nuances:

• 📱 Android: Supports most mice over Bluetooth, but may need to turn on mode "USB-squashing.
• 🍎 iPhone/iPad: It officially only supports mice in "AssistiveTouch" mode (for people with disabilities), and full control (like on a PC) is possible only on iPad with iPadOS. 13.4+.
• 🤖 MIUI (Xiaomi: on smartphones and tablets Xiaomi mouse works out of the box – just turn on Bluetooth and connect, as with a normal device.

Instructions for Android:

1. Open the Settings. → Connected devices → New device → Bluetooth.
2. Enable the mouse in pairing mode (as described in the previous section).
3. Select a mouse from the list. If the system requests permissions (e.g., access to notifications), allow them.
4. When you connect, the cursor will appear on the screen. To adjust its speed, go to Settings. → Special facilities → Control of the index.

⚠️ Note: Some Xiaomi smartphones (such as the Redmi Note 10) may turn off the touch screen when connecting the mouse over Bluetooth. This is not a mistake - just restart the device and both inputs will work simultaneously.

Xiaomi Mi Air Mouse and Mi Portable Mouse support gestures for mobile devices: for example, swiping left/right on the touchpad replaces swipes on the screen, which is convenient for presentations or viewing photos.

5. Set up additional buttons and proprietary software

Basic mouse functions (left/right button, wheel) work without additional drivers, but to unlock the full potential of the device will require proprietary software.

• 🎮 For gaming mice: Xiaomi Mi Gaming Center allows you to customize DPI (up to 10,000), macros and backlights RGB.
• 🖱️ For office models: Xiaomi Mi Mouse Utility adds gesture support and scroll speed adjustment.
• 🔄 For universal mice: Mi Bluetooth Suite allows you to quickly switch between devices.

How to install software:

1. Download the program from the official Xiaomi website (Support section) → Downloads) or from Microsoft Store (for Windows) 10/11). Do not use third-party sources – this may lead to malware installation.
2. Connect your mouse to your computer (even by wire) in any way.
3. Run the utility and follow the customization wizard. For example, at Mi Gaming Center, you can: Assign macros to additional buttons (for example, assign macros to additional buttons, F1–F12 or combinations of Ctrl+Alt+Calibrate the sensor for different surfaces (glass, mat, wood) and adjust the backlight color scheme (if any).

💡

Xiaomi’s proprietary software automatically detects the mouse model and downloads the settings profile. If your model is not recognized, update the program or verify the authenticity of the device (there are many fakes under the Xiaomi brand on the market).

For advanced users, there are alternative utilities:

• X-Mouse Button Control (Windows) – allows you to reassign buttons at the system level.
• Solaar (Linux) – manages Logitech settings and compatible devices (including some Xiaomi models).

6. Solving Common Xiaomi Mouse Problems

Even with quality devices, sometimes there are failures, and we've collected the most common problems and ways to solve them.

If the mouse is not defined by the computer, try the following steps:

1. Connect your mouse to another device (laptop or smartphone) to check its performance.
2. Update the drivers USB/Bluetooth: In Windows: Device Manager → Mice and other pointing devices → Update the driver. In Linux: perform sudo apt update && sudo apt upgrade (for Linux) Debian/Ubuntu).

Check your mouse for viruses. Xiaomi fakes sometimes contain malware in your firmware. Use USBDeview (Windows) to analyze connected devices.

7. Optimize the Xiaomi mouse for specific tasks: games, design, office

You can customize your mouse to fit specific use cases, and here are some tips for different tasks:

🎮 For games.

• Install. DPI maximum (8,000-10,000 for game models).
• Turn off pointer acceleration in Windows settings (Settings) → Devices → Mouse. → Additional Mouse Parameters → Index parameters).
• Assign to additional buttons frequently used actions (for example, Reload weapons or Open the map).
• Use a wired connection or USB-receiver.

🎨 For design and graphics

• Install. DPI 1200-2400 for accuracy.
• Activate the horizontal scroll (if there is a wheel with a slope).
• Set up sensitivity in programs like Photoshop or Illustrator (Pressure Sensitivity).
• Use a smooth sliding mat (e.g. Xiaomi Mi Gaming Mouse Pad).

📊 For office work

• Install. DPI 800-1200 for comfortable navigation.
• Set up gestures to switch between windows (Alt)+Tab).
• Activate silent mode (if any, as in Mi Silent Mouse).
• Use Bluetooth to quickly switch between your laptop and tablet.

Tips for Mi Air Mouse owners: This model supports a gyroscope that allows you to control your hand movements (like the Apple Magic Mouse). DPI 3 seconds - the indicator should flash purple.

FAQ: Frequent questions about Xiaomi mice