Modern wearable gadgets from Xiaomi have become a real standard of affordable electronics, allowing you to track activity and health without unnecessary costs. the Mi Band 4 model, despite the release of newer versions, remains popular due to the excellent design of the new model. AMOLED-However, the initial setup of the device often raises questions for beginners, especially if you have not previously used the ecosystem of the smart watch of this brand.
The activation process requires sequential steps, from preparing your smartphone to fine-tuning the interface. Mistakes in the pairing phase can lead to the bracelet not synchronizing data or receiving notifications. In this article, we will take a detailed look at each step to ensure that the Mi Band 4 installation goes smoothly, and you can immediately enjoy the functionality of the tracker.
It is important to understand that the basic functions of the gadget without tethering to the phone are limited only by displaying time and steps. To fully work, you need to create a digital bridge between devices through a special application. Without pre-installing the Mi Fit application (or Zepp Life) on the smartphone, activation of the bracelet is impossible, since it acts as the center for managing all settings.
Preparation of the smartphone and downloading the application
The first step before you start installing a fitness bracelet is to make sure your mobile device is compatible. Xiaomi gadgets work correctly with Android version 5.0 and higher, as well as iOS 10.0 and later. Check whether Bluetooth is enabled in the system settings, since this protocol provides wireless communication between the phone and the tracker.
The official software is then downloaded, and it used to be called Mi Fit, but after rebranding it is known as Zepp Life, and you can find it in the Google Play Market or Apple App Store, and be careful with third-party sources, as unofficial versions may contain bugs or malicious code, which is critical to the security of your health data.
- 📱 Make sure that the geolocation is enabled on the smartphone (GPS), This is a mandatory requirement for finding a device.
- 🔋 Charge the bracelet to at least level. 20-30%, So that it does not turn off during the setup process.
- 📶 Turn it off. VPN-services if they are active, as they can block the connection to Xiaomi servers.
Once you install the app, start it and create an account, you can use your phone number, email, or log in through your Google and Facebook accounts, and registration is mandatory, because all the statistics are stored in the cloud, not just in your phone's memory, and without authorization, you will be denied access to the pairing menu.
⚠️ Note: When registering, choose the right region of residence. If you choose the wrong country, the server may not process weather data correctly or work with delays in synchronization.
The process of pairing the device
When the preparatory phase is complete, you can move to the direct connection of the gadgets. Open the Zepp Life app and go to profile by clicking on the human icon in the lower right corner. In the list of available options, select Add Device or Profile → Add. The system will suggest you select the device type from the list; find the Mi Smart Band 4 there.
Once you select a model, you'll see a request for permission to use Bluetooth on your smartphone screen. Confirm the action, and you'll start an automatic search. At that point, a vibration and a Bluetooth symbol for mode(s) may appear on the screen of the bracelet itself. Don't press any buttons on the tracker yet, wait for the device name to appear in the app.
As soon as the name "Mi Band 4" appears on the list of found devices on the phone, tap it. The tracker screen will light up a request for confirmation of communication, usually a vibration signal and a flashing icon. Press the touch button of the bracelet (touch the screen) to confirm. The process takes from 10 to 30 seconds depending on the speed of the Bluetooth module.
☑️ Pre-conjugation check
If pairing is successful, you will hear a distinctive beep (if it is on), and a welcome window will appear on the phone screen suggesting you adjust your settings. Now your fitness tracker is officially linked to your smartphone and ready for initial calibration.
Setting up a user profile and goals
To correctly count calories and analyze sleep, the system needs your personal data. Immediately after pairing, the app will ask for the input of height, weight, age and gender. These parameters are used by algorithms to calculate body mass index (BMI) and energy expenditure. Don't ignore this stage, because without it, the statistics will be extremely inaccurate.
And at this point, you set your daily goals. You default to 10,000 steps, but you can change that to any direction. You can edit the goals later at any time, but the starting point motivates you to get in on the process. Remember, realistic goals are more important than ambitious goals, so you don't lose interest in the lessons.
| Parameter | Impact on work | Where to change |
|---|---|---|
| Weight. | Accuracy of calorie calculation | User profile |
| Purpose of steps | Motivation and notification | Settings → The purpose of activity |
| Time zone | Synchronization of time | Profile → Mi Band 4 → Time zone |
| Wrist lifting | Auto-on-screen | Profile → Mi Band 4 → Screen. |
The settings section also recommends activating the “Wrist Raise to Turn on the Screen” feature, which allows you to see the time and notifications with a simple turn of your hand without touching the screen, but it is worth considering that frequent activation of the screen can slightly increase battery consumption, although this is not a critical issue for the Mi Band 4.
💡
If you live in a region with a daylight/winter time switch, make sure the app includes an automatic time synchronization option to keep the clocks running slowly and on track.
Managing Notifications and Calls
One of the main functions of the smart bracelet is to receive notifications. For the Mi Band 4 to begin vibrating when incoming messages or calls, you need to give the appropriate permissions in the application. Go to the device settings in the Zepp Life menu and find the Application Notifications section.
Here you will see a list of all the programs installed on the phone. Activate the switches opposite the apps you want to see messages from on your wrist (WhatsApp, Telegram, Viber, SMS, calls). Importantly, on Android, this feature often requires additional permission to access notifications in the system settings of the phone.
It allows you to flexibly adjust the types of events, you can turn off vibrations when you call, leaving only messages, or vice versa, and there is also a Do Not Disturb feature that blocks all notifications at a given time, for example, at night during sleep, so that the light of the screen does not interfere with rest.
⚠️ Note: On some Android models (Xiaomi, Huawei, Samsung), the system can “kill” the application’s background process to save energy. To keep notifications coming in consistently, fix the app in memory and remove battery restrictions in your phone settings.
Customization of dials and interface
Visuals are what Xiaomi gadgets love, and it supports third-party dials, allowing you to completely change the look of the screen. In the app, go to Profile → Mi Band 4 → Dials, and there is a store with thousands of free design options available.
Choose your favorite design and click "Install." The download process takes 30 seconds to 2 minutes depending on file size and Bluetooth connection speed. During installation, do not move your phone far from the bracelet and do not lock the smartphone screen so that the interruption of communication does not lead to a firmware error.
What to do if the dial is not up?
In addition to static images, complex dials are available that display pulse, steps, moon phases and even weather in real time. Using complex dials with constant data transfer can require more frequent synchronization, which is worth considering when planning autonomous operation.
Additional functions and health monitoring
After basic adjustment, you should pay attention to health functions. The Mi Band 4 can track your heart rate automatically. In the heart sensor settings, you can choose the interval of measurement (every minute, 10, 30 minutes or only during exercise), constant monitoring is useful for analyzing stress and sleep quality, but increases energy consumption.
For sports enthusiasts, there are training modes available: running, walking, cycling, swimming, etc. When you start a workout through a bracelet menu or an app, the device will record pace, distance and pulse zones in detail. Once completed, the data is stored in history, allowing you to track the progress of physical activity on charts.
- 🏊♂️ Swimming mode: bracelet has protection of 5 ATM, This allows you to swim in the pool, but not to dive from a great depth.
- 🌙 Sleep monitoring: automatically detects deep and superficial sleep phases, as well as daytime naps (siesta).
- 📵 Phone Search: A feature that lets you trigger a loud signal on your smartphone if you lost it at home.
Remember to update your firmware periodically, the manufacturer releases updates that improve stability, fix bugs and add new dials, and notify you of a new version of the software will appear automatically in the application when you have an Internet connection.
💡
Regular synchronization and firmware updates are key to the stable operation of all sensors and the correct display of notifications throughout the life of the device.