Modern wearable devices such as Xiaomi Watch S1, They store a huge amount of sensitive information, from health data to bank cards, which is why developers are implementing robust security systems that require input. PIN-However, there are situations when this protection becomes an obstacle: the user forgets the combination, the device is glitching, or the watch is already locked to the new owner.
There are a number of ways to remove the password from the Xiaomi Watch S1, but it's important to understand that most of them will lead to a complete data reset. This is not just deleting numbers from the screen, but returning the gadget to the factory settings. In this article, we will discuss in detail all available methods of unlocking, from regular through the application to forced, and explain how to minimize loss of information when you restore access.
Reasons for blocking and types of protection on Xiaomi Watch S1
Before you start removing the security, you need to clearly understand what type of lock is installed on your device. Smartwatch from Xiaomi can use various authentication methods, and the procedure for disabling them may vary slightly. Most often, users are faced with digital PIN-code that you need to enter when you start the system, or a pattern lock that connects points on the screen.
There's also a hand-held lock feature that activates protection if sensors stop recording contact with the skin. Forgotten password is the most common problem that services encounter. If you typed the wrong combination three times, the device can temporarily block input, and after ten failed attempts, suggest resetting the data.
It's important to distinguish between screen lock and account lock. If a watch requires you to log in to your Mi Account after you reset, that's a level of anchor protection that can't be avoided by simply removing your password from the screen. In the case of a normal screen lock, you have full control of the device, as long as you remember the login details to the paired smartphone.
- 🔒 PIN-code: numerical combination (usually) 4-6 numerals) required for inclusion.
- 🔑 pattern lock: Connecting points in a particular order on a touchscreen display.
- 👋 Blocking when removed: Automatic activation of protection when the pulse sensor does not fix the wrist.
⚠️ Warning: Repeatedly entering the wrong password can cause the device to be temporarily locked for 30 seconds or a minute.Do not try to guess the code by brute force unless you are sure of your actions.
Understanding the type of protection is critical, because it's the way you choose to unlock, and if you just want to turn off your password request for convenience, it's through settings, and if you lose access, you'll need a more radical approach, and in any case, having a conjugated smartphone with Wear OS by Google or Mi Fitness installed makes it much easier.
Removing password through smartphone settings
The safest and most appropriate way to remove a password is to use the regular settings menu, which is a good way to do this if you remember the current code and you just want to turn it off so you don't type it every time, and you can control it not only from the watch itself, but also through the app on your phone, which is more convenient because of the larger screen.
To start, open the Mi Fitness app (or Wear OS if you’re using the global version) on your smartphone. Go to your device profile by selecting your Xiaomi Watch S1 from the list. You’ll need to find a section related to security or screen lock. The path can look like Settings → Security → Screen lock.
After entering the menu, the system will ask you to confirm the action by entering the current one. PIN-This is a mandatory security measure to prevent unauthorized persons from removing protection. Once confirmed, you will see a "Screen Lock" or "Ship Lock" switch. Choose "No" or "Disable" option".
The change is instantaneous, and when you wake up a screen or take a watch off your hand, you won't be able to request a password, but it's worth remembering that in this case, anyone who takes your watch will have full access to notifications, training history, and possibly payment information, if it's tied.
💡
If you disable the password, it is recommended to leave the "Find the device" function enabled so that in case of loss, you can track the gadget or remotely block it.
Reset to factory settings via the clock menu
If you have forgotten your password but have access to the settings menu (for example, through voice control or if the lock allows you to open some partitions), you can reset. However, on modern versions of Wear OS, access to the reset without unlocking is usually closed, so this method is relevant if you remember the code, but want to completely clear the device before selling.
To reset, take the watch and unlock it. Press the side button to call the app menu. Find the Settings icon. In the list that opens, scroll down to System or About, and you'll need to find the option to Unplug from your phone and reset or Reset.
The system will alert you that all data will be deleted. Confirm the action. The process will take a few minutes, during which time the Xiaomi Watch S1 will restart. Once completed, you will get a clean device that requires new configuration and pairing.
- 🔄 Press the side button to enter the menu.
- ⚙️ Go to Settings. → System system → Reset.
- ✅ Confirm the deletion of all data.
This method ensures that the password is completely deleted, as it erases all user information, and it is the best way to prepare the watch for resale or transfer to another user, and make sure that the battery is at least 50% so that the process does not stop in the middle.
☑️ Preparation for full discharge
Hard Reset (forcing reset) buttons
The situation where the password is forgotten and access to the menu is closed is the most difficult, in which case the only way out is a forced reset, often called Hard Reset. On the Xiaomi Watch S1, this procedure can be performed by a combination of buttons, if such is provided by the manufacturer in a particular firmware version.
To perform Hard Reset, turn off the watch completely. If it doesn't respond to touches due to locking, press the side button 10-15 seconds before the vibration or logo appears. Once the device starts to turn on, try pinching the button combination. On many Xiaomi models, this is the side button + bottom button (if there are two) or holding a single button for a long time at start.
If the Recovery menu appears on the screen (usually a list of items in English), select Wipe data/factory reset with the buttons. Confirm. If the Recovery menu doesn't appear, try holding the power button for more than 30 seconds. Some models are reset simply by holding the button long when you connect to the charger.
⚠️ Warning: Hard Reset deletes all data, including stored Wi-Fi networks, alarms, music files and dial settings. It will be impossible to restore them without a backup copy.
Some users note that on certain versions of the software, direct entry into Recovery via buttons is blocked, in which case you can rely on a reset via the application on the phone or waiting for the battery to drain, after which the system can itself suggest a reset after many failed input attempts.
What to do if the buttons don’t work?
Reset via Mi Fitness and Wear OS
The most effective way to remove a password if you forget it, but the watch is still paired with the phone is to use the device deletion feature in the app.This initiates a reset command that ignores the screen lock, as it has a higher priority in the device management system.
Open the Mi Fitness (or Wear OS) app on your smartphone. Go to Devices and select your Xiaomi Watch S1. In the upper right corner or at the bottom of the settings list, find Unplug or Delete the device. The system will warn you that this action will reset the clock settings.
Once confirmed on the phone, the watch will receive a signal and begin the cleaning process. The screen will go out, and in a minute or two the device will reboot in a "out of the box" state. The password will be completely removed, and you can reset the watch by creating a new combination or rejecting it.
It is important that the watch and phone are in close proximity to each other and connected via Bluetooth at this point, and if the connection is lost, the command will not pass, and also make sure that the phone is active on the Internet, since the server needs to confirm the detachment operation.
💡
Unbinding through the application is the only way to guarantee to remove the forgotten password without logging into the menu of the watch itself, provided that the Bluetooth connection is active.
Table: Comparison of password deletion methods
To make it easier for you to choose the right option, we have organized all the methods described in a comparative table that will help you assess the risks and conditions for each method.
| Method | Access to the menu is required | Data retention | Difficulty |
|---|---|---|---|
| Through settings (remember the code) | Yes. | Complete. | Low. |
| Annex decoupling | No. | No (reset) | Low. |
| Hard Reset (buttons) | No. | No (reset) | Medium |
| Complete discharge. | No. | No (reset) | Low (long wait) |
As you can see from the table, if your goal is just convenience, use the first method. If the problem is forgotten code, then the methods with data loss (decoupling or Hard Reset) are the only correct solutions. The table demonstrates that there is no safe way to “bypass” a password without losing data, it is done for security.
Possible problems and solutions
Users may encounter various difficulties in unlocking, such as a watch that requires a password from a Google account or a Mi Account after a reset (FRP — Factory Reset Protection: If you don’t remember your account details, it will be extremely difficult to unlock your device without having to access the original purchase check.
Another common problem is a bootloop after a failed reset. If the watch is constantly rebooting and doesn't reach the settings screen, try leaving it on charge for a few hours. Sometimes the system takes time to recover the file tables.
You can also experience a situation where the touch screen stops responding after reset, in which case only waiting for a full discharge and recharging will help. If the problem persists, you probably need to flash the device through special engineering utilities, which is better to trust the specialists.
- 📉 Pairing error: once reset, the phone may not see the watch. Solution: Remove the device from the Bluetooth list in the phone's settings and search again.
- 🔋 Fast discharge: after reset, the system indexes. Let the clock lie on the charge. 1-2 half-hour.
- 📡 No. GPS: Check the permissions in the app on your phone. Once you reset, you need to re-allow the geo-location.
⚠️ Note: If after a reset, the device writes “This device is locked” and requires the account of the previous owner, it is almost impossible to return access without his participation by legal means.
Frequently Asked Questions (FAQ)
In conclusion, we will answer the most popular questions that owners of Xiaomi Watch S1 have when they have problems with passwords, these answers are based on real-world user experience and the technical features of Wear OS.