Protect your favorite Xiaomi headphones from scratches, dust and accidental blows can not only be purchased case, but also stylish accessory, tied with their hands. You can pick up the color under your phone case, add your favorite patterns, or even embroidery the brand logo. In this article, we will break down the step-by-step knitting technique for the most popular Xiaomi headphone models (including AirDots, Buds, etc.). 3/4 Pro and FlipBuds, we will tell you how to calculate the size, and share the secrets of decorating.
The benefits of a homemade case are obvious: it will cost less than a branded one (wring and fittings cost a penny), and the quality will not be inferior to the factory version, and you can adapt the design to your needs, for example, add pockets for spare bottles or a loop for attachment to a backpack. Even if you have never held a hook in your hands, don't worry: we will analyze the basic loops in detail and provide schemes for beginners.
What yarn and hook to choose for the headphone case Xiaomi
The right choice of materials depends not only on the appearance of the case, but also on its functionality. For headphones Xiaomi ideally suited the following yarn options:
- 🧶 Cotton yarn (e.g. YarnArt Jeans or Pekhorka Cotton): strong, well-shaped, non-electrified. Suitable for tight knitting covers.
- 🧶 Acrylic with added wool (e.g. Alize Bella): soft, lightweight, but less wear-resistant. Perfect for openwork patterns.
- 🧶 Microfiber yarn (e.g. Tilda Chenille): creates a velour effect, is pleasant to the touch, but can roll when frictioned.
- 🧶 Flax or jute: for eco-style, but requires knitting experience (rigid structure).
The thickness of the yarn should be the size of the hook. №2.5-3.5 mm If you knit a case for Xiaomi Buds 4 Pro (large case), take the hook thicker — №4-5 mm to make it work faster. №2.5 mm.
⚠️ Warning: Avoid too fluffy yarn (such as mohair or angora) - villi can get clogged in headphone speakers and worsen sound.
The color scheme depends on your preferences, but keep in mind that dark shades (black, blue, green) hide pollution, and light (white, beige) visually enlarge the case. For the original design, you can combine several colors or use gradient yarn.
How to take measurements from the case of headphones Xiaomi for knitting
Before you start knitting, you need to accurately measure the case of headphones. Take a centimeter tape or ruler and record the following parameters:
- The length of the case (from one edge to the other in a closed state).
- The width of the case (the widest part, usually in the middle).
- The height of the case (thickness in closed form).
- The diameter of the hole for the charging cable (if you plan to leave it open).
For example, let’s give the standard sizes of popular Xiaomi models:
| Model headphones | Length (cm) | Width (cm) | Height (cm) |
|---|---|---|---|
| Xiaomi AirDots (Redmi) | 5.5–6 | 4–4.5 | 2–2.5 |
| Xiaomi Buds 3/3T Pro | 6.5–7 | 5–5.5 | 2.5–3 |
| Xiaomi FlipBuds Pro | 7.5–8 | 3.5–4 | 3–3.5 |
| Xiaomi Buds 4 | 6–6.5 | 4.5–5 | 2.5–3 |
When knitting, the case should be 0.5-1 cm wider and longer than the case, so that the headphones can easily enter and exit. If you plan to add zippers or buttons, consider their thickness when calculating.
💡
To avoid making a mistake with size, link a small sample (10×10 Then, take a look at the size of the sleeves, and then measure the size of the sleeves. 1 centimeter).
Basic loops and patterns for headphone case: what you need to know beginners
If you are new to crocheting, don’t be afraid: for a Xiaomi headphone case, you just need to master 3-4 basic loops. We will analyze them in detail from photos and videos (links are given at the end of the article).
- 🪡 The air loop is the basis of any knitting, used to set loops and create openwork elements.
- 🪡 The bar without the cape is the simplest and densest loop, perfect for the bottom of the cover.
- 🪡 A column with a cape (sn) - a universal loop for the main canvas.
- 🪡 Half-pillar with nakid (psn) - an intermediate option between SBN and SN, creates a neat edge.
The following patterns can be used for the cover:
- 🧶 The silk is a silk, and the silk is a silk, and it is a good fit.
- 🧶 "The scalp is a scalp for the scalp.
- 🧶 Openwork "fans" - for decorative inserts.
- 🧶 Braids or harnesses - for voluminous design.
For the first case, we recommend using columns without a cape, which create a dense canvas that will not stretch. If you want an openwork case, combine the sbn with air loops (for example, a spider scheme).
How do you tie a "ditch step"?
Step-by-step: how to tie a case for Xiaomi AirDots hook
Consider the universal scheme of knitting a case for Xiaomi AirDots (also suitable for Redmi Buds and similar models with a round case).
- 🧵 yarn (cotton or acrylic, ~50g).
- 🪡 Hook №2.5–3 mm.
- ✂️ Scissors and a stitching needle.
- 🔘 Loop markers (or English pins).
Step 1. Tie the bottom of the cover
Dial 4 air loops (V.P.) and lock them into the ring with a connecting column.
1 row: 8 sbn in the ring (in each sbn 2 sbn).
2 row: 1 sbn, increase (2 sbn in one loop) - repeat 4 times (12 sbn).
3 row: 2 sbn, increase - repeat 4 times (16 sbn).Continue to add loops in each row until the diameter of the bottom is equal to the width of the case (usually 10-12 cm).
Step 2. Form the walls of the cover
Go to knitting in a circle without adding extras. The height of the walls should be equal to the height of the case plus 1-1.5 cm (for free removal of headphones). Use pillars with a cape or rubber band for elasticity.
Step 3. We tie the valve (top)
For the valve, type a chain of V. p. length, equal to the diameter of the case. Tie the rectangle with columns without a cape (width - 3-4 cm, length - equal to the circumference of the cover). Sew the valve to the upper edge, leaving a hole for lightning or buttons.
☑️ What to check before stitching the cover
How to add zippers, buttons or other fasteners
The zipper is an important part of the case that protects the headphones from falling out. Let's look at 3 popular options:
- 🔗 Lightning: the most reliable way. Buy a lightning bolt that is 1-2 cm shorter than the circumference of the cover. Sew it with a secret seam to the valve, pre-tied the edges with columns without a cape for strength.
- 🔘 button + loop: suitable for valve covers, loops can be tied up in air loops or made of braids.
- 🧶 Knitted fastener: tie the lace of the air hinges and run it through the holes in the valve (the "needle" technique").
For lightning, use a hidden seam with a needle with a thread tone of yarn. If the lightning is too thick, tie its edges with columns without a cape so that it does not cling to the cover.
⚠️ Note: If you knit a case for Xiaomi FlipBuds Pro (with an oval case), lightning is better placed on the long side, not on the circumference.
For decor, you can add:
- 🎀 Same yarn bow.
- 🧷 A fob with the Xiaomi logo (buy ready-made or hooked).
- 🖌️ Embroidery with threads of mouline (for example, name or geometric pattern).
Design ideas: from minimalism to author's masterpieces
A headphone case can be not only functional, but also a stylish accessory. Here are some ideas for inspiration:
- 🎨 Minimalism: a monochromatic case with a relief pattern (for example, "bubbly" or "waffle"). Suitable for Xiaomi Buds 4 in corporate style.
- 🌈 Ombre: smooth color transition from dark to light (use Alize Miss Batik yarn).
- 🐱 Thematic design: a cat, minion or pizza case (this will require amurgumi schemes).
- 💎 Geometry: diamonds, triangles or hexagons (the technique of "faces").
- 🌿 Eco-style: a linen yarn case with embroidered leaves.
For inspiration, check out Pinterest for "crochet xiaomi case" or "knitted headphone case." Don't be afraid to experiment with colors and patterns - even a simple change of yarn can transform a case!
An important nuance: if you knit a case for Xiaomi Buds 3 Pro with wireless charging, avoid metal decorative elements (beads, rhinestones) - they can interfere with charging.
💡
The case should be functional: do not close the charge indicators, do not block the cable connector and do not use thick jewelry that will prevent the closure of the case.
Frequent Mistakes and How to Avoid Them
Even skilled craftsmen sometimes make mistakes when knitting headphone cases, and here are the most common problems and solutions:
| Problem. | Reason. | How to fix it |
|---|---|---|
| The case is too loose | Mistakes were taken or too thick a hook was used. | Bandage with the hook to a size smaller or add the rubber band on the upper edge. |
| The edges are "wavy" | Uneven thread tension or error in increases. | Use markers to mark the beginning of the row and control tension. |
| Lightning clings to the yarn | The edges of the lightning are not tied or too fluffy yarn is used. | Tie the edges of the lightning columns without a cape or replace it with a secret one. |
| The case is deformed after washing | The squirrels were shrunk (especially acrylic). | Wash by hand in cold water or use cotton yarn. |
If the case is too small, don't worry: it can be used as a dust bag for headphones or a case stand. And if the yarn ran out early, add contrast inserts from another thread - this will be the original design move!