How to properly harbour Xiaomi True Wireless Earbuds Basic 2: The Complete Guide

Wireless headsets of the True Wireless Stereo format have long ceased to be a luxury, becoming a de facto standard for everyday use. Xiaomi True Wireless Earbuds Basic 2 model deservedly popular due to its affordable price and stable operation, but the initial setup can raise questions for beginners. Proper pairing is the foundation on which all further stability of the connection and sound quality are built.

Synchronization with a mobile device takes only a few minutes if you follow a certain algorithm of actions. Violation of the sequence of taps or ignoring indicators often leads to the fact that the headphones can not see each other or the phone can not find the device. In this article, we will discuss in detail all the stages of connection, and also look at methods for solving typical problems.

Understanding the logic of how Bluetooth works in this model will help you avoid common errors when you first start. It is important to consider that the left and right headphones must first connect before transmitting sound to the smartphone, only after that you can fully transmit the stereo signal without delays and breaks.

Primary preparation of the device for work

Before you start actively searching for the device in the smartphone menu, you need to make sure that the headset itself is ready. The factory transport film often remains on the charging contacts inside the case, which blocks the power supply. Carefully remove the headphones from the charging case and check for protective stickers on the metal contacts.

After removing the insulation, place the headphones back in the case to start the charging cycle. The indicators on the outside should light up red to signal the current. If there is no glow, check the integrity of the charging cable and make sure that the power supply produces sufficient current.

The optimal condition for the first turn on is a battery charge of at least 50%. Xiaomi True Wireless Earbuds Basic 2 can behave unstable at low charge during the mating procedure. Fully charged batteries ensure that the process is not interrupted halfway due to a sudden shutdown.

⚠️ Note: Do not use powerful fast charging units from smartphones (Quick Charge) 3.0/4.0) to charge the case, unless the instructions say otherwise, high-power current may damage the headphone power controller.

The initial charge usually lasts about 1.5-2 hours, and you shouldn't leave your device unattended overnight or for a few days, although modern controllers have overcharging protection, and taking care of lithium polymer cells will prolong the life of your headset.

Step-by-step instructions for pairing with a smartphone

The basic connection process is to perform sequential actions that activate visibility mode. First, remove both earbuds from the charging case simultaneously, at which point they should automatically turn on, as announced by voice messages or characteristic beeps.

On your smartphone screen, go to Bluetooth settings and activate your search for new devices. The list of available gadgets should appear as Mi True Wireless EBs Basic 2 or a similar combination of letters and numbers. Click on it to start the connection procedure.

Successful connection is confirmed by the voice phrase "Connected" and flashing indicators. If the phone requests confirmation of the access code, just agree with it, then the audio profiles of A2DP and HFP will be activated automatically.

In rare cases, manual pin-code input may be required. The standard value for most Xiaomi devices is the combination 0000 or 1234. However, this is extremely rare for the Basic 2 model, since it uses a modern protocol of secure pairing.

Synchronization of left and right headphones with each other

The critical thing for stereo is to connect the left and right modules together correctly, so if you hear only one earpiece, you're not activated in TWS mode. You need to reset the settings to fix the situation.

Remove the device from the list of gadgets saved on the phone by selecting the option "Forget this device." Then place both earbuds in the case, close the lid and wait 10 seconds. Then remove them at the same time and wait until they signal to communicate.

⚠️ Attention: Remove the headphones from the case at the same time, and if you take them out in turn at a long interval, they may not synchronize with each other and will work as two independent mono-devices.

The headphones should flash at a certain frequency, indicating the search for a partner. When the left and right channels find each other, one of the indicators will stop flashing often, going to standby mode for connection to the phone, only after that you can search for a headset in a smartphone.

The stability of the radio link between the modules depends on the distance to the source of the signal. Try not to cover the antenna area with your hand during the initial pairing, this will ensure the purity of the signal and the correct distribution of the channels.

Connecting to devices on different operating systems

The algorithm for connecting to Android and iOS smartphones is almost identical, but there are nuances in the menu interface. On Android devices, after choosing a device, you may need permission to access contacts and call logs to fully work the headset.

iPhone users need to be careful when pairing first, since iOS strictly controls the access rights of Bluetooth accessories. After connecting, check in the audio settings that the Xiaomi Basic 2 is chosen as the audio output device, and not the phone speaker.

For laptop and Windows PC owners, the procedure is also standard: open Settings → Devices → Bluetooth and add a new device. Make sure the Bluetooth adapter drivers are updated to the latest version to avoid codec issues.

Cross-platform makes it easy to switch between gadgets, but remember that connecting to multiple active sound sources at the same time is impossible. The headset will play sound from the device from which the last signal was received.

Use of Mi Wear app and additional settings

For advanced management, it is recommended to install the official Mi Wear app (formerly Xiaomi Wear), which allows you not only to track the battery charge of each headphone separately, but also to update the firmware of the device.

You can set up touch controls in the app, and you can reassign the action to double or triple taps by adapting the headset to your habits, such as calling a voice assistant or switching tracks.

Software updates through the app often solve problems with audio and video desynchronization. Manufacturers regularly release patches that improve connection stability and microphone performance. Don't ignore notifications about the availability of a new version of the software.

⚠️ Warning: During the firmware update through the application, do not open the case cover or remove the headphones. Interrupting the data recording process can lead to a break in the device.

Also in the app you can find the headphone search feature, which will help locate the device if you lost it nearby.The sound will play at maximum volume, which will make it easier to search.

Solving common problems when connecting

If the headphones don't match, try resetting the headphones completely, press the touch zones on both earphones simultaneously for 20 seconds (while they are in the ears or in the hands, but outside the case), and the indicators should blink several times, signaling a reset.

A common problem is to desynchronize the sound when one earphone is behind the other, in which case it will help to repeat the procedure of initial pairing between each other outside the range of the Bluetooth phone, make sure that there are no powerful sources of interference, such as Wi-Fi routers or microwave ovens.

Case charging problems are often solved by cleaning contacts; oxidation or dust can interfere with energy transfer; use a dry cotton swab to clean the metal areas inside the case and on the headphones themselves.

💡

If the headphones stop charging, try to rotate them slightly in the case or press your finger. Sometimes contact is lost due to the design features of the seats.

If the phone sees the device but the sound is not coming, check the multimedia settings in the Bluetooth menu. Make sure the ticks are opposite the Audio and Multimedia points. Sometimes the audio profile is disabled manually or programmatically.

Frequently Asked Questions (FAQ)

The Xiaomi True Wireless Earbuds Basic 2 provides a comfortable listening experience and clear voice transmission during calls, and by following these guidelines, you can avoid most of the typical problems and enjoy high-quality sound.