How to properly connect headphones Xiaomi Redmi: instructions for all models

Xiaomi Redmi wireless headphones are a popular accessory for music lovers and active users, but their first connection sometimes raises questions. Even if you have previously used headsets of other brands, the pairing process for Redmi Buds, AirDots and other models has nuances: From activating search mode to manually resetting your settings when you crash. In this article, we'll look at all the ways you connect to your smartphone. Android/iOS, We can also solve typical problems such as lack of sound or constant communication interruptions.

Xiaomi’s headphones feature support for the Mi TrueWireless Stereo protocol, which provides a stable connection between the left and right earphones, but it requires the right sequence of actions when it is first turned on. If you have purchased a new model (e.g. Redmi Buds) 5 Pro or AirDots 3), Do not be in a hurry to get upset by unsuccessful attempts. 90% In some cases, the problem is solved for 2-3 step.

Preparing headphones for pairing: what to do before connecting

Before you look for headphones on the list of available devices, make sure they are out of sleep and ready to connect.

• 🔋 Charging the case and headphones: if the indicator on the case does not burn or flashes red, connect it to charging on the case 10-15 Minimum charge level for pairing — 15%.
• 🎧 Removing the headphones from the case: pull out both earphones - they must automatically turn on (blitzes white/blue indicator). If this does not happen, press and hold the touchpad on each earphone on the headphone at the same time. 3-5 seconds.
• 📱 Disabling old connections: If the headphones were previously paired with another device, reset their settings (instructions in the section below.

Important: Redmi Buds 4 and later only support Fast-Pair when you first turn on, and if you've already connected them to another device, you'll need to manually reset.

Also check that your smartphone or computer has Bluetooth enabled and no active connections to other audio devices (columns, car systems). On Android, this can be done through the Quick Settings Panel, on iPhone, in Settings. → Bluetooth.

Interface with Android-smartphone: step-by-step instructions

On devices running Android 10 and later (including Xiaomi, Redmi smartphones, POCO) The connection process is as simplified as possible thanks to built-in profile support A2DP. Follow the algorithm:

1. Open the Settings. → Connected devices → Bluetooth (on) MIUI The path may look like settings. → Bluetooth).
2. Activate Bluetooth if it's turned off. The headphones should appear on the list of available devices called Redmi Buds or Mi True Wireless.
3. Click on the headphone name. If you have a request for code confirmation (usually 0000 or 1234), type it in.
4. Wait for the message "Connected to media audio." Now the headphones are ready to use.

On smartphones. Xiaomi/Redmi s MIUI 12 And then, after you connect, you'll see a pop-up with a suggestion to install the Mi Earphones app (available on Google Play:

• 🎛️ Equalizer and noise reduction settings (if supported by the model).
• 🔄 Updates to the headphone firmware.
• 📊 View the charge level of the case and each headphone separately.

If the headphones don’t appear on the list:

1. Turn off and turn on Bluetooth on your phone again.
2. Return the headphones to the case, wait 10 seconds, then pull them out again.
3. Reboot your smartphone.

Connection to iPhone (iOS) and features of work

While Xiaomi Redmi is an Android brand, their headphones are compatible with the iPhone, but with some limitations, with the main difference being the lack of support for the Mi Earphones app and some features like adaptive noise reduction (on Buds 3 Pro models and older).

Instructions for iOS 15 and newer:

1. Open Settings → Bluetooth.
2. Take the headphones out of the case and wait until they start flashing white/blue.
3. In the list of devices, find Redmi [model] and tap it.
4. Confirm the connection (no code required).

⚠️ Note: On iPhone, Xiaomi Redmi headphones can display as two separate devices (left and right earphones).This is normal - choose the one with the prefix L or R in the title.

After connecting, check:

• 🔊 The sound is played in stereo (if only one earpiece is heard, reset the settings, see the section below).
• 📱 In the control panel (swipe down from the upper right corner) the charge level of the headphones is displayed.
• 🎵 There is no audio delay in the Apple Music or Spotify app (if any, turn on Low Latency mode in Bluetooth settings).

💡

If your iPhone has headphones connected but the sound is interrupted, try turning off the Auto Sound Switch function in Bluetooth settings.

Matching with a laptop or PC (Windows/macOS/Linux)

Connecting to a computer is not much different than a smartphone, but there are nuances with drivers and codes. Let's take each case separately.

Windows 10/11

1. Open Settings → Devices → Bluetooth and other devices.
2. Turn on Bluetooth and click "Add Device" → "Bluetooth".
3. Select Redmi from the list. If the device is not found, click "Update".
4. Confirm the connection (code is not usually required).

If the sound is distorted or interrupted after the connection:

• 🔧 Go to the Control Panel. → Sound. → Headphone properties.
• In the "Additional" tab, select 16-bit, 44100 Hz (quality) format CD).
• Turn off the option "Allow applications to exclusively manage this device."

macOS

On a MacBook or iMac:

1. Open System settings → Bluetooth.
2. Click "Connect" next to Redmi [model].
3. If there is no sound, go to System settings. → Sound. → Exit and select headphones manually.

Linux (Ubuntu/Debian)

On distributions with GNOME or KDE:

1. Install Bluetooth support packages: sudo apt install pulseaudio-module-bluetooth bluez-tools
2. Reboot the service: sudo systemctl restart bluetooth
3. Turn on the headphones in pairing mode and connect through the Bluetooth Manager graphical interface.

⚠️ Note: On Linux, Xiaomi Redmi headphones can only work in mode HSP/HFP (low sound quality. A2DP You will need to manually adjust PulseAudio.

Problem Solving: Headphones are not connected or not working

If pairing fails, use this troubleshooting manual, and 95% of the time, the problem is solved by one of these methods.

1. Resetting headphone settings

For most Redmi models, the reset is done as follows:

1. Put both headphones in the case and close the lid.
2. Open the lid and press simultaneously on the touch panels of both headphones on the 10-15 seconds.
3. The indicator on the case should flash red and white - this is a signal of a successful reset.
4. Close and open the case cover again - the headphones will go into pairing mode.

Redmi AirDots 3 Pro and Buds 4 Pro are different.

• Get the headphones out of the case.
• Press and hold the touchpad on the right earpiece for 20 seconds until the indicator flashes red.

2. Problems with synchronization of the left and right earphone

If the sound is only in one headphone:

• Put both earphones back in the case.
• Take out the right one first, wait 5 seconds, then the left one.
• If it does not help, reset the settings (see above) and repeat the pairing.

3.The headphones plug in, but no sound.

Check it out.

• 🔊 Volume level on the device and the headphones themselves (on some models is regulated by touching the touch panel).
• 📵 No active calls or notifications that may block the audio stream.
• 🔧 In Bluetooth settings, the Media Audio profile is selected" (A2DP), Not "Telephone audio" (HFP).

Additional Features: How to Get the Most from Headphones

After successful pairing, we recommend setting up additional features that will improve the user experience:

Activation of low latency (for games and videos)

On Android:

1. Open the Settings. → Connected devices → Headphones → Additionally.
2. Enable the option "Low Lag" or "Game Mode".

On Windows:

• In the sound control panel, select the 16-bit, 48000Hz format.
• Turn off all sound effects.

2. Sensory control settings

By default:

• 🎵 One touch: playback/pause.
• 🔀 Double touch: the next track.
• 🔙 Triple touch: previous track.
• 📞 Long-term retention: Calling a voice assistant.

You can change the purpose of gestures in the Mi Earphones app (available only for Android).

Checking the level of charge

On Android with MIUI:

• Open the notification panel - the charge level of the case and headphones will be displayed automatically.

On iOS:

• Add the Battery widget to the main screen.

Nana Windows/macOS:

• The charge level is visible in the device properties in the Bluetooth settings.

💡

For maximum autonomy, turn off the headphones when not using them – they automatically go to sleep after 5 minutes without connecting, but do not turn off completely.

Connection with other devices: TV, game console, car

Xiaomi Redmi headphones can be connected not only to smartphones and computers, but also to other gadgets. Let's consider the nuances for each case.

TVs (Smart TV)

Android. TV (For example, Xiaomi Mi TV):

1. Go to Settings → Devices → Bluetooth.
2. Select Redmi from the list.
3. In the TV sound settings, select the headphones as the output device.

Nana Samsung/LG TV:

• Use the Sound menu → Sound output → Bluetooth device.
• Some models require a connection through TV SoundConnect.

Game consoles (PlayStation, Xbox, Nintendo Switch)

On PlayStation. 4/5:

• Use it. USB Bluetooth adapter, as consoles do not support direct Bluetooth audio transmission.

On Nintendo Switch:

• Upgrade your console to version 13.0.0 or later.
• Go to System Settings → Bluetooth audio → Connect the device.

Car tape recorders

To connect to the car system:

1. Activate Device Search Mode on the tape recorder (usually a button) PHONE Bluetooth).
2. Select Redmi from the list.
3. If the sound is only on calls, in the settings of the tape, turn on the option "Media-audio".

⚠️ Note: In some cars (for example, Toyota, Volkswagen) headphones Xiaomi can connect only in mode HFP, It limits the sound quality. Use music to listen to it. AUX-cable FM-transmitter.

FAQ: Answers to Frequent Questions