How to pair headphones Xiaomi among themselves: instructions for all models

Xiaomi wireless headphones are some of the most popular gadgets for music lovers, athletes and just active users. However, after buying, many people face the problem: instead of stereo sound, only one headphone works, or devices do not see each other at all, the reason most often lies in the wrong pairing between each other - a procedure that the manufacturer does not always describe in the instructions.

In this article, we will discuss how to synchronize Xiaomi headphones of different series - from the budget Redmi AirDots to the flagship Xiaomi Buds 4 Pro. You will learn not only the standard algorithm, but also hidden nuances that will help avoid typical errors. And if something goes wrong - at the end of the article there is a section with solving the most common problems.

Why do Xiaomi headphones not automatically mate?

Many users mistakenly think that it is enough to simply pull the headphones out of the case and they will immediately pair up. In practice, this only works in ideal conditions: if both devices are fully charged, have never connected to other gadgets and have the latest version of the firmware. In reality, Xiaomi uses several pairing mechanisms that depend on the model and version of the software.

The main reasons why headphones are not synchronized:

• 🔋 A discharged battery of one of the headphones (even if the indicator in the case is burning green).
• 📱 Residual settings from a previous connection to a smartphone or other device.
• 🔄 Reset to factory settings of one headphone without a second.
• 📦 Different firmware on the left and right device (relevant after updates).
• 🎧 Mechanical damage to contacts in the case or the headphones themselves.

Interesting fact: Xiaomi AirDots 3 Pro and later uses Dual Device Connection technology, which allows you to connect to two sound sources at the same time (for example, a smartphone and a laptop), but if you activate this mode before pairing the headphones with each other, they can “forget” each other.

Preparation for pairing: what to do before the beginning

Before you start synchronization, follow the necessary preparatory steps, which will save time and eliminate most errors:

Charge the case and headphones to 100%|Remove headphones from the list of connected devices on all gadgets|Check the integrity of contacts in the case|Update the headphone firmware (if available)|Turn off Bluetooth on other devices nearby-->

Pay special attention to battery power, even if the indicator in the case shows green, it does not guarantee that both earbuds are charged the same way, to check the charge level of each earbud separately:

1. Get both earphones out of the case.
2. Look at the charge indicators on the headphones themselves (if any).
3. For models without indicators, use the Mi Home or Xiaomi Earbuds app (available on Google Play and App Store).

If one of the headphones is discharged, plug the case into charging and wait until both devices charge to 100%. In Xiaomi Buds 3 Pro and later, you can check the charge of each headphone through Bluetooth Settings → Xiaomi Earbuds → Battery status.

💡

If the headphones have not been used for a long time, before pairing, leave them in the case on charging for 10-15 minutes - this will reset possible power errors.

Standard pairing procedure for most models

The algorithm for synchronizing Xiaomi headphones with each other is almost the same for all models, except for some nuances. Below is a universal instruction that is suitable for:

• 🎧 Redmi AirDots (all generations)
• 🎧 Xiaomi Mi AirDots (including Youth Edition)
• 🎧 Xiaomi Buds (1-4 generation)
• 🎧 Xiaomi FlipBuds (Pro and regular)

Sequence of action:

1. Put both headphones in the case and close the lid.
2. Open the case cover and hold the pairing button (usually located on the back of the case) for 10-15 seconds until the indicator starts flashing white and red (or only white in new models).
3. Take both earbuds out of the case, and they need to automatically connect to each other, whether it's a voice alert ("Connected" or "Couple connected") or a double beep.
4. Activate Bluetooth on your smartphone and find the name of your headphones (e.g. Redmi) in the list of devices. AirDots_R Mi True Wireless Earphones).
5. Connect to the headphones. If the pairing is successful, Bluetooth will display the status "Connected to media audio".

In Xiaomi Buds 3 Pro and later, the process is slightly different: instead of a button on the case, touch control is used. To activate the pairing mode, touch and hold the touch panel on the case for 5 seconds until the indicator begins to pulse with white light.

Resetting headphone settings before pairing

If the standard procedure didn't work, it's likely that the headphones have "remembered" the previous connections and are in conflict, and then a full reset will help, and the way you reset depends on the model:

Once reset, the headphones will automatically disconnect and be ready for a new pairing. Importantly, in some models (Xiaomi Buds 4 Pro), the reset leads to a loss of user settings (for example, touch controls or equalizer settings), they will have to configuring again through the application.

💡

Resetting is a last resort. Before you do that, just reset your headphones: put them in the case for 30 seconds, then pull them out and re-pair them.

Features of conjugation for specific models

Despite the general logic, each Xiaomi headphone series has unique nuances. Let's take a closer look at them.

Redmi AirDots (1-3 generation)

The most budget line, but with frequent synchronization problems, the main feature is that there is no automatic pairing when you first turn on.

1. Get both earphones out of the case.
2. Press and hold the touchpad on both headphones simultaneously for 5 seconds.
3. Wait for the double beep - this means that the headphones are connected.

If one of the headphones doesn't respond to pressing, check if the sensor is contaminated. Wipe it with an alcohol napkin.

Xiaomi Buds 3 Pro / 4 Pro

The flagship models support advanced synchronization through the Xiaomi Earbuds app, to bundle them together:

1. Install the app and connect to the headphones.
2. Go to Settings → Device Interconnection.
3. Click on "Sync Headphones" and follow the instructions on the screen.

In these models, button-to-case pairing only works if the headphones have never connected to the smartphone, and after the first connection, the control goes to the application.

Xiaomi FlipBuds Pro

These headphones have Dynamic Pairing mode, which automatically switches the lead headphone (right or left) depending on which one you pull out of the case first, to turn off this mode and lock the pair:

1. Open the Xiaomi Earbuds app.
2. Go to Settings → Connection mode.
3. Select "Fixed pair"

💡

In FlipBuds Pro, after upgrading to 1.7.0.0+, the pairing between the headphones is automatically on the first turn on. If you have old firmware, update it through the app.

Frequent mistakes and their solutions

Even when paired properly, Xiaomi headphones may not work properly, and here are the most common problems and ways to fix them:

🔊 Problem: The sound is only in one headphone

Causes and solutions:

• 🔋 One of the headphones is dead. → Charge both to 100%.
• 🎵 Incorrect audio profile → In Bluetooth settings, select the profile "Stereo (A2DP) instead of "Phone call (HFP).
• 🔄 Synchronization failure → Put the headphones in the case, close the lid for 10 seconds, then pull out and reconnect.
• 📱 The smartphone problem → Restart your phone or try connecting to another device.

🚫 Problem: Headphones are not defined by the system

If the smartphone does not see headphones in the list of available devices:

• 🔄 Reset Bluetooth settings on your phone: Settings → System system → Reset → Resetting Wi-Fi, Mobile Network and Bluetooth.
• 📱 Update the firmware of headphones through the Xiaomi Earbuds app.
• 🛠️ Check the physical condition: clean the contacts in the case with a cotton swab dipped in alcohol.

🔊 Problem: Constant communication breakdowns

If the sound is interrupted or the headphones are turned off:

• 📶 Eliminate interference: turn off nearby operating devices at a frequency of 2.4 GHz (Wi-Fi routers, microwaves).
• 🔋 Check the battery: if the charge level is below 20%, failures may occur.
• 📱 Turn off power saving for Bluetooth in your phone settings.

Additional settings after pairing

After successfully synchronizing the headphones with each other, it is recommended to adjust them for optimal operation.

🎵 Sound tuning

In the Xiaomi Earbuds app, you can:

• 🎛️ Equalizer with presets (bass, vocals, classics).
• 🔊 ANC (Active noise reduction – control of the level of suppressed noise.
• 🎧 Transparent mode - for communication without removing headphones.

⚙️ Sensory management

You can reassign actions to touch:

• 👆 Single touch: playback / pause, answer to the call.
• 👆👆 Double touch: next track, call voice assistant.
• 👆👆👆 Triple touch: previous track, inclusion ANC.

🔋 Optimizing the battery

To extend the working hours:

• 📴 Turn it off. ANC, if he doesn't need it.
• 📵 Reduce the volume – at the maximum level, the battery sits down 2 times faster.
• 🔄 Enable automatic shutdown in the application settings (via 5-10 minutes of inactivity).

💡

Xiaomi Buds 4 Pro models have an “Adaptive ANC” feature that automatically adjusts noise reduction levels depending on the environment, which increases battery consumption by 15-20%, but significantly improves sound quality in noisy places.

FAQ: Answers to Frequent Questions