Xiaomi’s modern wireless headsets have become a benchmark for price-performance, but their initial setup may raise questions for new owners. The process of connecting Xiaomi Earbuds headphones to a smartphone seems trivial, but often hides the nuances that depend on the operating system and device model. Proper execution of the sequence of actions guarantees not only stable sound, but also the correct operation of touch control.
In this article, we will take a look at all the steps of connection, from case extraction to fine-tuning through the system menu. You will learn how to avoid typical pairing errors and what to do if the gadget does not appear in the list of available devices. A deep understanding of the procedure will allow you to enjoy music without delays and technical failures.
Preparation of the headset and smartphone for the first start
Before you try to create a wireless connection, you need to make sure that both devices are ready. First of all, check the charge level in the case and the headphones themselves, since a discharged battery can block detection mode.
You should also prepare your smartphone: turn on Bluetooth and make sure it is visible to other devices. It is recommended to temporarily turn off the search for old, unnecessary gadgets in the Bluetooth list so as not to get confused with the names. If you previously connected these headphones to another phone, it is better to reset or “forget” the device in the menu of the old smartphone.
⚠️ Warning: If the headphones have just been removed from the factory packaging, make sure that protective films are removed from the contacts on the headphones themselves, otherwise they will not charge and turn on.
An important aspect is the cleanliness of the contacts. Wipe the metal dots on the bottom of the headphones and inside the case with dry soft cloth.Oxidation or dust can prevent charging, which will cause one of the headphones to not turn on when the lid is opened.This is a common reason why users think the device is broken, although the problem is solved by simple cleaning.
Algorithm of connection to devices on Android
The Android operating system provides the most native integration with Xiaomi accessories. First, open the charge case cover without removing the headphones themselves. At this point, the indicator on the front of the case should light up, signaling the transition to pairing mode.
☑️ Checking before connection
Then take your smartphone and go to Bluetooth settings. Press the scan button or just wait for a new device to appear on the list of available devices. The model name usually contains the Mi True Wireless or Redmi Buds label with the addition of the model letters. Click on the name to initiate the connection.
In some cases, the system may request confirmation of pairing through a pop-up with the code. If the request appears, make sure the code matches, and click "Confirm." Once the connection is successful, you will hear a characteristic beep in the headphones, and the phone's status bar will show the headset battery icon.
Connection with iPhone and iOS devices
Apple appliance owners can also easily use the Chinese giant's products, although the process may be slightly different visually: Open the Bluetooth settings on your iPhone or iPad. Make sure the wireless module is active.
Remove the headphones from the case. Unlike Android, where it is often enough to simply open the lid, iOS sometimes requires double-tapping the touch zones on the headphones themselves to put them into visibility mode. The indicator on the case should start flashing white, which means that you are ready to connect.
Find the device in the Other Devices list on your smartphone screen. After clicking on the name, the driver installation process will begin. It is worth noting that some advanced features, such as the instant pop-up with charge, can only work with a special application, since native support for the MI Connect protocol in iOS is limited.
⚠️ Note: When connecting to iOS devices, you may receive a request for permission to access contacts or microphone – this is necessary for the voice assistant function and answer calls.
Using the Xiaomi Earbuds app to customize
To unlock the full potential of your headphones, it is highly recommended to install the official Xiaomi Earbuds app (or Mi Wear for older models), which allows you not only to see the exact percentage of charge, but also to adjust the equalizer, update the firmware and reassign the actions of the touch zones.
Once you install the app, launch it and press the add button, and the system will find the connected headphones, and inside the menu you can choose one of the preset sound modes or create your own profile by adjusting the bass, mid and treble frequencies.
Why do you need a firmware update?
One of the app's key features is to set up touch management. You can assign double, triple touch, or prolonged finger retention to perform specific commands, such as switching a track or calling a voice assistant. Without using the app, these settings often remain standard and may not fit your habits.
| Function | No app. | With an annex |
|---|---|---|
| Equalizer setting | Unavailable | Full frequency setting |
| Headphone search | No. | Audible search signal |
| Update of the PO | Automatically (rarely) | Manual version control |
| Transparency regime | Fixed | Level adjustment |
Solving Connection and Visibility Problems
Sometimes people are faced with a situation where the headphones are not connected or the phone does not see them. The first thing you can do is put the headphones back in the case, close the lid and wait 10 seconds, and then repeat the opening procedure. This restarts the Bluetooth module of the headset.
If that didn't work, check if the headphones are connected to another device nearby.The connection priority is often given to the last active gadget.Switch off Bluetooth on a tablet or laptop that can intercept the signal.
💡
If the headphones are visible but not connected, try in the Bluetooth settings of the phone to click “Forget device” (or “Unpair”), and then perform the search again.
In the case when the headphones are no longer synchronized with each other (only one plays), you need to reset to the factory settings. Usually, this requires clamping the touch areas on both headphones simultaneously for 5-10 seconds until the indicator flashes a certain color (often red or orange).
Resetting and re-synchronization
Hard Reset is a universal solution for most software glitches, which returns the headphones to the “out of the box” state by removing all stored pairing profiles, which is especially useful when selling the device or transferring it to another user.
To do the reset, place both headphones in the case and open the lid. Find the function button on the case (if any) or use touch control. In models without a button, you need to remove the headphones and pinch the sensors. The exact combination for your model is better specified in the instructions, as it varies.
After reset, the indicators should flash, confirming the memory clear. Now the headphones are back in (pairing) mode and ready for a new connection. Delete the old record of the headphones from the phone's memory before re-searching to avoid profile conflicts.
💡
Resetting eliminates 90% of problems with desynchronization of the left and right channel, and also solves problems with the inability to connect.