How to connect headphones Xiaomi AirDots: detailed instructions and troubleshooting

Xiaomi AirDots wireless headphones (and their modifications: AirDots Pro, AirDots Youth, Redmi AirDots) have become one of the most popular gadgets due to the combination of price, sound quality and convenience. However, many users face the problem: the headphones do not connect to each other or connect to the phone. In this article, we will discuss all possible ways of synchronization, including forced reset, manual pairing and solving typical errors.

It's important to understand that AirDots' connection process depends on the model and the firmware version. For example, AirDots 3 Pro supports Bluetooth 5.2 low-power technology, which affects the connectivity algorithm. If you're first to encounter wireless headphones, don't worry, our instructions will be suitable even for beginners.

Before you start setting up, make sure that:

• 🔋 Headphones charged (indicator on the case should burn white or green).
• 📱 Your smartphone supports Bluetooth. 4.2 or newer (for AirDots) 2/3 Bluetooth required 5.0+).
• 🔄 Headphones are not connected to another device (for example, a laptop or tablet).

1. standard connection of Xiaomi AirDots to the phone

If you've just bought headphones or reset them to factory settings, use this method.It's suitable for most models, including the Redmi AirDots and AirDots Youth Edition.

Algorithm of action:

1. Take both earphones out of the case. They should automatically turn on (blitzes red/white indicator).
2. Press the touchpad on the right earphone for 5-7 seconds until the indicator starts flashing red and white (pairing mode).
3. On the phone, open Settings. → Bluetooth and select Mi AirDots from the list of devices BASIC_R (Or a similar name for your model).
4. Confirm the connection. In 5-10 seconds, the headphones sync with each other, and the sound will go in stereo.

⚠️ Note: If two separate devices are displayed in the Bluetooth list (Mi AirDots) BASIC_L and BASIC_R), It means the headphones are not connected to each other, in which case you can go to the reset section.

2. Forced synchronization of headphones with each other

Sometimes Xiaomi AirDots headphones connect to the phone, but only one of them makes sound, which means that the left (L) and right (R) headphones don't connect into a stereo pair, and this solves the problem by forced pairing:

Steps for AirDots 1/2 generation:

1. Put both headphones in the case and close the lid for 10 seconds.
2. Pull them out and press the sensors on both headphones simultaneously for 15 seconds until the indicators start flashing red and white.
3. Put the headphones back in the case. In 5 seconds, pull them out, they should automatically connect.

For AirDots 3 Pro and Redmi AirDots 3:

• 🔄 Take out the headphones and press the sensor on the right earphone for 10 seconds (until the voice message "Cleared" sounds").
• 🔋 Put them in a case, close the lid for 30 seconds, then pull them out — synchronization will happen automatically.

💡 If the headphones don't connect after this, try connecting them to another device (like a tablet.

3.Full reset Xiaomi AirDots to factory settings

If standard methods don't work, do a hard reset, which will remove all the saved connections and return the headphones to their original settings.

Instructions for all models:

1. Put the headphones in the case and close the lid.
2. Press and hold the button on the back of the case (near the USB-C connector) for 20 seconds. The indicator on the case should go out, and then blink red.
3. Open the lid and pull out the headphones, and they'll automatically go into pairing mode (blinking white light).

⚠️ Warning: After reset, AirDots Pro 2 and later headphones may require a firmware update via the Mi Home app.

4. Connect via the Mi Home app (for new models)

Headphones Xiaomi AirDots 3 Pro, Redmi AirDots 3 and other modern models support advanced settings through the proprietary application.

• 🎛️ Set up sensor control.
• 🔊 Update the firmware to fix bugs.
• 📊 View the level of charge of each headphone.

How to connect:

1. Install the Mi Home app (available for Android and iOS).
2. Sign up or sign in to your Xiaomi account.
3. Click Add Device (+) → Headphones → Xiaomi AirDots.
4. Follow the instructions on the screen (you will need to confirm the connection via Bluetooth).

Important: Without a firmware update via Mi Home, the AirDots 3 Pro headphones may not support ANC (active noise cancellation) function or have microphone issues.

5. Solving typical connection problems

Even after successful synchronization, users are faced with common errors, and let's look at the most common ones and how to fix them.

⚠️ Warning: If after all the manipulations AirDots Youth Edition headphones still do not work, check them on another phone. If the problem persists, factory defect is possible - contact the Xiaomi service center.

6.How to check the originality of Xiaomi AirDots before connecting

There are many Xiaomi AirDots fakes on the market that may not connect or work properly. Before setting up, make sure your headphones are original:

Signs of genuine AirDots:

• 📦 Box with a hologram and serial number (you can check on the Xiaomi website).
• 🔊 Sound on: Original headphones pronounce "Mi AirDots" or "Connected" in English.
• 📱 The Bluetooth menu displays a name with the prefix Mi or Redmi (fakes often have Cyrillic characters).
• 🔋 The case has a magnetic cap fixation and charge indicator with 4 LEDs.

If you find a fake, you might not be able to plug it in to the standard instructions.

1. Try holding the touchpad on your headphones for 30 seconds (sometimes this works for clones).
2. Use universal reset codes (e.g. 0000 or 1234 when requesting a PIN).

💡

The original Xiaomi AirDots always have a serial number on the box and case, and also support the branded Mi Home app.

7. Alternative ways of connecting (for experienced users)

If the standard methods don't work, you can try non-obvious solutions, which are suitable for AirDots 2 and later:

Method 1: Connecting through Developer Mode (Android)

1. Activate Developer Mode on your phone (7 times click on the Build Number in the settings).
2. Include Bluetooth debugging in the developer menu.
3. Reboot your phone and try to reconnect the headphones.

Method 2: Use of third-party applications

Apps like Bluetooth Auto Connect or Btool can help if AirDots aren't defined by the system, they force the devices to be scanned and sometimes "see" headphones better than a standard Bluetooth menu.

⚠️ Note: Using third-party apps can compromise your phone’s security.Install them only from official sources (Google Play, App Store).

FAQ: Frequent questions about Xiaomi AirDots