How to remove the bracelet Xiaomi: instructions for Mi Band, Smart Band and Watch

Why it is important to remove the bracelet correctly

Xiaomi fitness bracelets are some of the most popular wearables on the market, thanks to a combination of functionality and affordable price. However, even these simple devices have nuances in operation that many users do not think about, one of them is the correct removal of the bracelet from the hand or replacement of the strap.

Careless handling of the mount can cause the latch to break, damage to the body, or even the loss of the gadget. 7/8 They have an improved fixation mechanism, but they have more fragile plastic elements than the earlier versions. And in the Xiaomi Watch, the strap attachment system is fundamentally different, and it requires care when working with spring pins.

In this article, we will discuss:

• 🔧 How to remove the bracelet from your hand without damage (including models with a heart rate sensor on the back)
• 🔄 Step-by-step instructions for replacing the strap on Mi Band 1-8, Smart Band Pro and Xiaomi Watch
• ⚠️ Typical errors that lead to latch breakage or loss of gadget
• 🛠️ What to do if the bracelet is stuck or not removed in the standard way

Anatomy of fastening: how to arrange bracelets Xiaomi

Before you take off the bracelet, it’s important to understand what type of mount you’re dealing with. Xiaomi uses three basic locking systems:

1. The classic latch (Mi Band 1-5, Smart Band) is a plastic tongue that is inserted into the groove on the body, and over time, the plastic can deform, causing the bracelet to spontaneously unbutton.
2. The magnetic latch (Mi Band 6-8) is a more reliable mechanism with metal contacts, but requires precise positioning when snapping.
3. The Xiaomi Watch (Watch) S1/S2) — standard solution for smart watches, where the strap is mounted through holes in the body using miniature springs.

Also, consider the material of the strap:

• 🧶 Silicone - flexible, but can "stick" to the skin with prolonged wear.
• 🧵 Tissues are less slippery, but more difficult to clean.
• 💎 Metal (for Xiaomi Watch) – reliable, but require a special tool for adjustment.

⚠️ Note: If you are wearing a Mi Band bracelet 7/8 sensory SpO₂ (saturation of blood with oxygen), do not pull the strap with force - the sensor is located close to the fastener and can come off when a sharp movement.

Step-by-step: how to remove the bracelet from the hand

To start with, it's safe to remove the bracelet from your hand without damaging your skin or gadget, and this is especially true for models with a heart rate sensor on the back (Mi Band 6-8, Smart Band Pro), where the body fits tightly to the wrist.

Algorithm of action:

1. Relax the strap by pulling the free end (not the body!).
2. Carefully move the bracelet to the base of the palm, without tearing the sensor from the skin sharply.
3. If the bracelet "sucked" (characteristic of sweaty hands or silicone straps), tuck the edge with a nail or plastic card.
4. For models with a magnetic latch (Mi Band) 7/8) First, remove the strap, and then remove the body.

Important: If you use a sleep monitoring bracelet, remove it 10-15 minutes before going to bed – this will allow the skin to “rest” and avoid irritation from prolonged contact with sensors.

Relax the strap beforehand|Check the cleanliness of the sensors|Use a plastic mediator (not a knife!)|Remove from your hand in front of a shower or pool-->

Replacement of the strap: instructions for different models

Now, we're going to figure out how to remove the band for replacement or cleaning, and the process varies depending on the model.

Mi Band 1-5 and Smart Band (plastic latch)

1. Turn the bracelet up with sensors.

2. find a small button on the back of the strap (usually marked with a symbol) PUSH).

3. Press the button with a screwdriver or nail and pull the strap up.

4. Repeat for the second side.

⚠️ Attention: On the Mi Band 4 and Smart Band, the button is sunk deeper - do not use metal objects so as not to scratch the body. SIM-map.

Mi Band 6-8 (magnetic latch)

1. Take the body of the bracelet with one hand and the other - for the strap at the base.

2. Pull the strap sideways (not up!) until you hear a click.

3. Similarly, disconnect the second side.

4. To install a new strap, combine the magnetic contacts before clicking.

Xiaomi Watch and Watch S1/S2 (spring-pin)

1. Turn the clock over and find on the back of the strap a small hole at the base.

2. insert a thin object into the hole (needle, paper clip, special tool for the watch).

3. Press the pin to the point - it will move out, and the strap will be freed.

4. Repeat for the second side.

Tip: For Xiaomi Watch S1 With a metal bracelet, it is better to use a professional watch tool (spring bar tool) so as not to scratch the case.

💡

If you do not have a special tool, you can use a fork - its teeth are ideal for pressing spring pins.

Frequent problems and their solutions

Even with careful handling, there can be difficulties.

1. The bracelet is not removed from the hand ("sucked")

The reason: Sweat or cream creates a vacuum between the sensor and the skin.

Decision:

• 💧 Soak the bracelet edge with warm water (not boiling water!).
• 🧊 Bring the ice to the edge of the body for 10 seconds - this will narrow the vessels and reduce the "suction".
• 📄 Tap the edge with a plastic map, moving parallel to the skin.

2. The latch is broken or not fixed.

For Mi Band 1-5: Most often, the plastic tongue breaks, and the temporary solution is to fix the strap with tape or replace it completely.

For Mi Band 6-8: If the magnetic latch is not holding, check:

3.The strap got stuck in the body

For plastic latches:

• 🔨 Carefully tuck the strap on the side with a thin screwdriver.
• 💨 Blow in the crevice with a hair dryer (warm air will expand the plastic).

For spring pins (Xiaomi Watch):

• 🧲 Apply a magnet to the body - this can move the pin.
• 📏 Use tweezers to pull the pin from the back side.

⚠️ Note: If the Xiaomi Watch bracelet S1 with a metal strap jammed, do not try to unclose it with pliers - this will damage the mechanism).

💡

If the bracelet is not removed in standard ways, do not apply excessive force - in 80% of cases, the problem is solved by heating (dryer) or cooling (ice).

How to avoid breakdowns: tips for care

To fasten the bracelet last longer, follow simple rules:

• ☀️ Avoid direct sunlight. Ultraviolet makes plastic brittle (especially for Mi Band 1-4).

For models with metal straps (Xiaomi Watch) S1/S2):

• 🔧 Adjust the size only with a special tool.
• 🧲 Keep your watch away from strong magnets (speakers, refrigerators) – this can disrupt the compass.

Interesting fact: In the bracelets Mi Band 7/8 a neodymium magnet is used for latching, which in 10 It's more powerful than normal, which is why the strap is so tightly fixed, but it's easier to damage the mechanism if you're not handling it carefully.

When to contact the service: signs of serious problems

Not all faults can be repaired by yourself. Contact Xiaomi Service Center if:

• 🔴 Latch broken inside the case (visible fragment of plastic or metal).
• 🔋 The bracelet does not hold charge after falling (possibly damaged battery or contacts).
• 📡 Sensors stopped working (HRC, SpO₂) post-strap.
• 💧 Water got under the case, and the bracelet does not turn on (even after drying with rice).
• 🔊 There was an outside noise inside the body (for example, after impact).

For warranty repairs will need:

• 📄 Check or electronic copy of purchase.
• 📦 Original packaging (for some services).
• 🆔 Serial number (located on the back of the case or in the settings of the Mi application) Fit/Zepp Life).

⚠️ Note: If you disassembled the bracelet yourself (for example, tried to fix the latch), the warranty is canceled. In this case, the repair will be paid - the cost of replacing the mount in the service is from 500 to 1500 rubles depending on the model.

FAQ: Answers to Frequent Questions