How to reset the headphones Xiaomi: full instructions for all models

Xiaomi wireless headphones are some of the most popular accessories because of the combination of price, sound quality and functionality. However, even the most reliable technology sometimes fails: the headphones stop connecting to the phone, the sound is distorted, or one of the modules discharges faster than the other, in 90% of cases, resetting to factory settings helps - a procedure that returns the device to the original parameters and eliminates software errors.

In this article, you will find step-by-step instructions for all current models, from the budget Redmi AirDots to the flagship Xiaomi Buds 4 Pro. We will discuss when to reset, how to do it without the risk of damaging the device, and what to do if the headphones do not respond to standard commands. And for those who are afraid of losing important settings, we have prepared a section with answers to frequent questions.

When do I need to reset Xiaomi headphones?

Resetting your headphones is not the first time you have a problem, but only when other methods have failed, and here are key signs that the device needs a “hard reboot”:

• 🔌 Headphones do not connect to a phone or PC, although they used to work stably.
• 🔊 The sound is interrupted, distorted or lost in one of the headphones.
• 🔋 One earphone discharges much faster than the other (the difference is more than 30%).
• 🎧 Headphones are not synchronized with each other (for example, the right does not turn on with the left).
• 📱 Mi Home or Xiaomi Earbuds app doesn’t recognize device.
• 🔄 After updating the firmware, glitches appeared (spontaneous shutdowns, control failures).

If the problem is hardware-related (such as physical damage to the speaker or battery), resetting won't help -- it will require repairs. To distinguish a software glitch from a breakdown, try connecting the headphones to another device. If the error is repeated, it's likely the firmware's fault.

Preparation for resetting: what to do in advance

Before you reset your settings, follow a few simple steps to avoid additional problems:

1. Check the battery. Make sure the case and headphones have enough power (at least 30%) If the charge is critically low, plug the case into charge for 10-15 minutes.
2. Turn off the headphones from all devices. Forget them in the Bluetooth settings on your phone, tablet, and computer. This will prevent conflicts when you reconnect.
3. Remove the headphones from the Xiaomi app. If you've used Mi Home or Xiaomi Earbuds, remove the device from the list of connected gadgets.
4. Prepare instructions for your model. Reset methods may vary, and below we will provide detailed guides for different lines.

If you use an active noise-canceling (ANC) headphone, such as the Xiaomi Buds 3 Pro or Buds 4, this feature may turn off after reset. Don't worry, you can activate it again in the app settings.

💡

Take a picture of the current headphone settings in the Xiaomi Earbuds app (e.g. equalizer, control gestures). Once reset, you can quickly restore them.

How to reset the headphone settings Xiaomi: a universal way

Most Xiaomi models support hardware reset via a combination of buttons on the case or the headphones themselves, which works even if the headphones do not respond to touch touch touch or connect to the phone.

Instructions for most models (Redmi AirDots, AirDots 2, Buds 3/4, Air 2/3, etc.):

1. Put both headphones in the case and close the lid.
2. Connect the case to a power source (for example, to charge from the phone).
3. Press and hold the button on the back of the case (usually one) for 10-15 seconds.
4. The indicator on the case will flash red and white (or only red) – this is a signal that the reset is made.
5. Release the button, take the headphones out of the case and try to connect them again.

If the indicator does not blink, try holding the button longer (up to 20 seconds) or repeat the procedure with another power source (sometimes the case does not recognize a weak current from the device). USB-port).

Make sure the headphones are charged | Disconnect them from all Bluetooth devices | Remove them from the Xiaomi app (if used) | Prepare the charger | Put both headphones in the case-->

Reset for specific models: detailed instructions

Some Xiaomi headphones have unique reset options, and below is a table with instructions for popular models:

For touch-controlled models (such as Buds 3 Pro or Buds 4), it is important to touch the sensors simultaneously on both headphones, and if you touch only one, you will not reset.

What to do after resetting: setting up and connecting

After a successful reset, Xiaomi headphones will return to factory settings.

• 📱 They won’t remember previous devices, they’ll have to reconnect them.
• 🎛️ All individual settings (equalizer, gestures, ANC) throw off.
• 🔄 You may need to update the firmware through the application.

To connect the headphones after reset:

1. Open the case cover and make sure the indicator flashes white (search mode).
2. On your phone, turn on Bluetooth and find the device in the list (usually the name begins with Mi True Wireless or Redmi Buds).
3. Confirm the connection if required. PIN-code, try 0000 or 1234.
4. Install the Xiaomi Earbuds app (for new models) or Mi Home (for old ones) and perform the initial setup.

If the headphones don’t appear in the Bluetooth device list, try:

• 🔄 Reboot the phone.
• 📱 Forget all previously connected Xiaomi devices in Bluetooth settings.
• 🔋 Remove the headphones from the case and manually turn them on (holding the sensor 3 seconds).

💡

After reset, the headphones can connect longer than usual (up to 30 seconds), which is normal - the device restores the connection between the left and right modules.

Common Resetting Mistakes and How to Avoid Them

Many users experience problems when resetting due to wrong actions, and here are the typical errors and ways to solve them:

⚠️ Note: If headphones Xiaomi Buds 3 Pro or newer are not reset through the sensors, do not try to disassemble the case or headphones - this will lead to a loss of warranty.

• ❌ Insufficient charge. If the indicator on the case is red, the reset may not work. Charge the device to at least 50%.
• ❌ The headphones are not in the case. Most models are only dropped when both modules are in the case. 2S, which can be discarded separately.
• ❌ Use a non-original cable. Cheap cables may not provide enough current to reset. Use a proprietary charger.
• ❌ If you release the button too soon, the reset will not end.

Another common problem is that the headphones are plugged in, but there's only one sound that comes in. It doesn't always require resetting.

1. Clean contacts on headphones and in the case with a cotton swab dipped in alcohol.
2. Reboot the phone.
3. In Bluetooth settings, “forget” the device and reconnect it.

Frequent questions about resetting Xiaomi headphones

We've collected answers to some of the most popular user questions, and if your problem isn't here, check the FAQ section at the end of the article.

Conclusion: When resetting does not help

If after several reset attempts, Xiaomi’s headphones still don’t work properly, the problem may be deeper:

• 🔋 Battery wear: If the headphones are discharged in 1-2 hours, it may be necessary to replace the battery (especially for models over 2 years old).
• 🎧 Wheezing, distortion of sound or complete absence of sound in one earpiece often indicate a physical breakdown.
• 📡 Bluetooth module malfunction: If the headphones are not detected by any device, the problem may be in the antenna or controller.

In such cases, we recommend:

1. Contact the official Xiaomi service center (the warranty is saved if the device is not disassembled).
2. Check the headphones on another phone (like a friend) to rule out a problem with your device.
3. If headphones are older than 2-3 years, evaluate the feasibility of repair - sometimes it is cheaper to buy a new model.

⚠️ Warning: Do not try to disassemble the case or headphones yourself - this almost always leads to a loss of warranty.Inside, glue joints and fragile plumes are used, which are easily damaged.

We hope this guide has helped to make your Xiaomi headphones work again, and if you have any questions or your model is not mentioned in the article, please clarify the details in the comments, we will try to quickly update the manual.