The Xiaomi Mi Band 4 fitness bracelet has become one of the most popular activity tracking gadgets, but even such a simple device can have situations when it needs to be removed. WedΕug users, the main reasons are changing the strap, resetting to factory settings, cleaning contacts or preparing for repair. However, many face the problem: the bracelet capsule sits tightly in the strap, and if you carelessly handle it can damage the latches or the body itself.
In this article, we'll look at all the possible ways to remove the Mi Band 4, from standard retrieval to emergency methods if the bracelet is jammed, what tools you'll need, how to avoid breakage, what to do if the latch breaks, and we'll also answer the common questions: can you remove the bracelet without tools, how to avoid losing data when you reset, and why the capsule sometimes doesn't lock back.
1. Standard method of removing the bracelet: step-by-step instructions
If you just want to change your strap or clean your contacts, use the official Xiaomi method.It doesn't require special tools and is safe for the device.
You only need a flat screwdriver (or any thin piece like a plastic card) and a little patience, and the key is not to make excessive efforts to not break the locking elements.
- π§ Take the bracelet and turn it over with the back of your arm, and on the strap you'll see a little hollowness next to the capsule, which is the lock.
- π Place the screwdriver in the recess and gently push away from the capsule (not deep.
- ποΈ After clicking, pull the capsule upwards, it should come out of the groove. If it doesn't, press the other side again.
- β οΈ Donβt pull the capsule behind the screen or side buttons β this can damage the sensor or body.
If the bracelet is new and the latches are tight, you can sway the capsule slightly left-right without pulling it out completely, which will help loosen the fixation.
Completely discharge the bracelet (if you plan to not use it for a long time)| Make sure that there is no moisture on your hands | Prepare a soft surface (towel) for laying the capsule |Phot current settings in Mi Fit-->
π‘
If you have long nails, you can try to fit the nail fixer instead of a screwdriver - the main thing is that the nail is strong and does not break.
2 How to remove a bracelet without tools: 3 alternative methods
You don't always have a screwdriver or a plastic card on hand, and you can do it with the tools you can get by, and here are three ways that people have tested.
- π§ Ice: Put the bracelet in the freezer for 10 to 15 minutes. The plastic strap will shrink slightly, and the capsule will come out easier. Minus: not suitable for bracelets with metal straps.
- π₯ Fen: Heat the strap with a hair dryer (don't send hot air to the capsule!) The plastic will soften and the locks will weaken. Important: don't overheat - 30 to 40 seconds is enough.
- π§Ό Soap solution: Wet the strap with warm water and soap and wait 5 minutes. This will reduce friction and the capsule will slip out more easily. After the procedure, dry the bracelet.
These methods are especially useful if the bracelets are stuck with sweat or dirt, but remember: exposure to temperature and moisture can damage the tightness of the bracelet, so check its performance after removing.
Standard (driver) |Ice |Dryer |Direction |Another method-->
3.What to do if the bracelet is jammed: emergency measures
Sometimes the Mi Band 4 capsule gets stuck in the strap so tightly that standard methods don't help.
- π§ Strap deformities (for example, after falling or severe compression).
- π¦ Moisture intrusion that caused the fixers to corrosion.
- π Incorrect installation of the capsule after the previous removal.
In such cases, be careful not to break the bracelet permanently.
- Try swaying the capsule left-right while pressing the locks on both sides.
- If it does not help, use two screwdrivers: insert them into the recesses on both sides and carefully dilute them to the sides.
- In extreme cases, you can cut a strap (if you don't need it already), for this you can use a stationery knife or a metal hacksaw.
β οΈ Warning: If the capsule is not removed even after the strap has been cut, do not attempt to knock it out with a hammer or other heavy objects.
What to do if the lock is broken?
4.How to remove bracelet for resetting or repair
If you are shooting Mi Band 4 for hard reset (reset to factory settings) or repair, you need to consider a few nuances:
- π Resetting does not require removing the capsule β it can be done through the bracelet menu or the Mi Fit application. But if the bracelet does not respond to pressing, you will have to remove the capsule to access the reset button (it is on the back side).
- π§ To repair (e.g., replace the battery), the capsule must be removed completely, in which case use a plastic mediator instead of a metal screwdriver to avoid scratching the body.
After the capsule is removed:
- Place it on a soft surface (such as a towel).
- Do not touch the contacts on the back side β this can cause static electricity.
- If you plan to not use the bracelet for a long time, remove the battery (if you can) or discharge it to 0%.
| Situation | Do I need to take off the capsule? | Recommendations |
|---|---|---|
| Replacement of the strap | Yes. | Use the standard method with a screwdriver |
| Resetting settings | No (if the bracelet reacts) | Reset via Settings β Reset in Mi Fit |
| Cleaning contacts | Yes. | Use a cotton swab dipped in alcohol |
| Battery replacement | Yes. | Complete disassembly of the capsule is required |
| The bracelet is off. | Yes (to check contacts) | Check if there is any oxidation on the contacts |
β οΈ Warning: If you remove a repair capsule, remember that the Xiaomi Mi Band 4 has a battery adhesive connection.Do not try to tear it off by force - use a plastic blade and heat (for example, a hairdryer).
5. How to set the capsule back: Step-by-step
Installing the capsule in the strap often raises more questions than removing it. Many users complain that the bracelet is not fixed or falls out when moving.
- Take a strap and find slots for the locks (they are located closer to the center).
- Insert the capsule at a 45 degree angle, starting on the side where there is no button.
- With a light press, click the capsule until the characteristic click. If you didn't click, check if the locks are standing correctly.
- Pull the capsule upwards to make sure it is securely secured.
If the capsule is not fixed:
- π§Ή Clean the strap grooves of dirt or sweat (use a toothpick).
- π Check if the caps on the capsule are bent.
- π Try another strap - possibly the current worn out.
π‘
The capsule should be able to enter the strap with a little effort, and if it dangles or falls out, the locks are not in place.
6. Frequent mistakes and how to avoid them
Even with the seemingly simple procedure, many users make mistakes that lead to the bracelet breaking. TOP-5 The most common mistakes and how to prevent them:
- π¨ Use of metal tools (knife, scissors). β Solution: Take only plastic or wooden stick.
- πͺ Excessive force when pressing the locks. β Solution: If you don't, change the method (e.g., heat the strap).
- πΏ Moisture on contacts after removal. β Solution: Dry the capsule before installing it back.
- π Removal of the capsule at low charge (less than 20%). β Solution: Charge the bracelet before manipulation.
- π Incorrect installation (inverted capsule). β Solution: The button should be on top and the sensor should be closer to the palm of your hand.
Another common problem is the loss of data after the bracelet is removed.
- π± Sync your data with Mi Fit before any manipulations.
- π Do not press the reset button (on the back of the capsule) without the need to.
- π Record or take pictures of your current settings (alarm clocks, activity goals).