Modern wireless headsets offer incredible freedom of movement, but their initial setup can sometimes be difficult for users, especially for popular models like Xiaomi Earbuds Basic, which often require the right pairing procedure for stable operation. If you are faced with a situation where the left or right earbuds do not play sound, or devices do not see each other, then the problem is solved by the correct synchronization.
In this article, we will take a look at all the steps of connection, from case extraction to forced resetting. Synchronization is the process by which two separate modules are combined into a single stereo system before connecting to a smartphone, and understanding this mechanism will allow you to avoid most errors in operation.
Don't panic if the lights don't flash as described in the brief memo, or if the phone only sees one device. TWS-And then we'll look at a step-by-step algorithm that's guaranteed to restore your headset to work.
Principle of operation and preparation for interface
Before you start any manipulation, you need to understand the basic principle of TWS (True Wireless Stereo) technology, unlike conventional Bluetooth headphones, communication goes not only from the phone to each ear, but also between the headphones themselves, one of them acts as a master (usually the right one), and the second – as a plume, receiving a signal from the first one.
That's why it's critical to connect the ears first, and then connect them to the sound source. If you skip this stage, you'll only get the sound in one channel or mono mode. To get started, make sure the case and the earbuds are at least 30-40% charged.
💡
Make sure that there is no oxidation or dust on the headphone contacts and inside the case, as this can prevent charging and the correct start of the synchronization procedure.
It is also important to clear the connection history on your smartphone.If you have previously tried to connect Redmi AirDots or Xiaomi Earbuds Basic to this phone, but without success, the old profile may conflict with the new communication session.
Primary activation and entry into mode
The initial activation process begins with the removal of both headphones from the charging case, at which point they should automatically turn on, as the indicators signal, and usually they start flashing red, which means waiting for a connection or finding a partner.
At this point, the lights may flash at different frequencies, and your task is to wait for one of the headphones (most often the right one) to flash white, and the other to blink red or go out, signaling that the device has entered search mode and is ready to mate.
- 🎧 Remove both earphones from the case at the same time.
- 🔴 Wait for the indicators to turn red.
- ⚪ Wait until one of the indicators flashes white (search mode).
- 📱 Turn on Bluetooth on your smartphone and find the device in the list.
If the automatic transition to white flashing mode did not occur within 5-7 seconds, manual activation may be required. To do this, touch the touch zone on both headphones and hold your finger for about 5 seconds until the indicators go out, and then release. After re-energizing, they should go into pairing mode.
Step-by-step instructions for synchronization
Once you've seen one light flash white and the other flash red (or white, but at a different frequency), you can move to the final stage. Open the Bluetooth settings on your mobile device and start searching for new gadgets. The list of available devices should appear Mi True Wireless EBs Basic or Redmi AirDots.
Click on the device name to connect. At this point, the system may request a pairing confirmation or access code (usually 0000), but most often the connection is automatic. Once the connection is successful, the voice assistant will report status: Connected or Connected.
☑️ Checklist of successful synchronization
There is a nuance that is often overlooked: if you connect a headset to a new device and the old one is within range, priority may be given to the previous gadget, so turning off Bluetooth on all previously used devices is a prerequisite for clean synchronization.
Forced Resetting (Hard Reset)
In situations where the standard procedure does not help, or the headphones are no longer synchronized with each other (working as two independent mono-device), a complete reset is required.This action will return the Xiaomi Earbuds Basic to the factory settings and clear the memory of previous pairs.
To perform the reset, place both headphones in the case, but don't close the lid completely to have access to the touch areas. Make sure they start charging (the indicators burn red). Then press and hold the touchpads on both headphones simultaneously for 10-15 seconds.
⚠️ Attention: During reset, the indicators may flash red several times in a row. Do not release the buttons until you see that they flashed red 5 times and then went out or went into white flashing mode. Early interruption will lead to surgery.
Once the lights are gone or flashed white, the reset is complete, and you have to re-extract the headphones from the case, and they automatically go into pairing mode, and you can pair again, just like the first purchase.
What if the reset didn't help?
Table of indicators and their significance
Understanding color is key to quickly diagnosing problems: different flashing modes tell the user about the current state of the device, charge level or connection errors. Below is a transcript of the main signals.
| Color of indicator | Blinking mode | Meaning | User action |
|---|---|---|---|
| Red. | It's burning all the time. | Charging's coming. | Leave in the case until full charge |
| Red. | Migayette | Low charge or standby mode | Charge or activate with a button |
| White | Migayette | Search mode (Pairing) | Search for the device in Bluetooth |
| Blue | Migayette | Successful phone connection | We can use it. |
Note that in some revisions, the color may be slightly different, but the logic remains the same: red is energy/expectation, white/blue is active communication. If you see both colors blinking chaoticly at the same time, this may indicate a critical controller error.
Addressing common problems
Even after proper synchronization, there can be specific failures, such as desynchronization of the sound when the music is late in the left earphone, or the complete absence of sound in one of the channels, often solved by repeating the reset procedure described above.
Another common problem is that the phone sees two devices with the same name (e.g. two Mi True Wireless EBs Basic) which is a classic sign that the headphones have not paired with each other, in which case you need to delete both profiles from the phone's memory, put the headphones in the case and perform Hard Reset.
💡
The main reason for desynchronization is the loss of communication between the master and the plume, which is treated exclusively by complete reset and re-mating.
If problems persist, check the Bluetooth version on your smartphone. Xiaomi Earbuds Basic supports Bluetooth 5.0 and higher are desirable for stable operation, although they are compatible with 4.2. Also make sure that the phone does not include energy-saving modes that can limit the operation of the Bluetooth module.
⚠️ Warning: Do not try to update your headphone firmware through third-party apps not designed for this model.This may result in the device being locked. Use only official methods or trust factory settings.