Xiaomi AirDots (including the Pro, Pro 2, 3, SE) remain among the most popular wireless headsets due to the combination of price, sound quality and convenience. However, many users face problems with the first synchronization: one earbud does not connect, sound only in mono mode, or the device is not detected at all in the Bluetooth list. This article will help to understand all the nuances of connection from basic settings to solving rare errors.
We will look at official synchronization methods for Android and iOS, alternative methods (for example, through the Mi Home app), and also give a checklist for troubleshooting. LC3-codec and airdots SE, If you've tried to connect your headphones before, but you haven't succeeded, skip the introduction and go straight to Common Problems and Solutions».
Before you start, make sure your AirDots are charged (the indicator on the case should burn white or red), and your smartphone is enabled with Bluetooth 5.0.+ (If you use an iPhone, upgrade iOS to the latest version - old firmware has bugs that support it. AAC-codec for Xiaomi-headsets.
Basic synchronization with Android and iOS
The standard AirDots connection process is the same for most models, but there are nuances depending on the operating system.
- Remove the headphones from the case. They should automatically turn on (blitzes red/white indicator).
- Activate the pairing mode: 🔴 For AirDots. 1/2/SE: Press the touch panel on both headphones on 5 seconds until the indicators start flashing red and white. 🔵 For AirDots. 3/Pro 3: press the button on the case once - the indicator flashes white.
On a smartphone.
Settings → Bluetooth
Mi AirDots
Confirm the conjugation
Android
On iOS, after you connect, you will receive a notification to support automatic switching between Apple devices (if the headphones are compatible). For Android, we recommend installing the Mi Home app (link in the section about the software) to unlock additional features like Game Mode (reduced audio delay).
☑️ Checking before synchronization
Important: If the headphones were already paired with another device, they should be reset.
- Put both earphones in the case.
- Press the touchpad on both headphones for 15 seconds until the indicator flashes red 3 times.
- Remove the headphones – they are ready for a new connection.
How to turn on stereo mode (if the sound is only in one headphone)
One of the most common problems is that the headphones are plugged in, but the sound is only played in the right or left, and this is due to a synchronization failure between the headsets.
- 🔄 Reconnect: Forget the device in Bluetooth settings. Reset your headphones (see instructions above). Reconnect, wait for the sound signal "Stereo mode activated».
Forced activation through Mi Home
AirDots 3/Pro
- Open the Mi Home app → Profile → My devices → AirDots.
- Select headphone settings → Sound mode → Stereo.
- 🔋 Charge problem: If one earphone is discharged more than the other, the stereo mode may not activate. Charge the case to 100%.
You can download Mi Home at the following links:
- 🤖 Google Play
- 🍎 App Store
The update process takes 5-10 minutes. Don't remove the headphones from the case or close the application until it's finished. For AirDots 3 Pro, updates are more frequent - they add support for new codecs (for example, aptX Adaptive for Android 12+).
⚠️ Warning: If during the firmware update the indicator on the case goes out and the headphones stop responding, this is a sign of failure. Only resetting the button on the case for 30 seconds will help (does not work on all models).
After the update, we recommend:
- 🔄 Reboot your smartphone.
- 🎧 Forget your headphones in Bluetooth and connect again.
- 📊 Check the firmware version in Mi Home (must match the latest on the official website).
Connecting to multiple devices
AirDots (except SE) support multi-point connectivity, which allows you to switch quickly between a smartphone, laptop and tablet, but there are limitations:
- 📱 Android: You can only connect to one device at a time. To switch, you need to turn off Bluetooth on the first and connect to the second.
- 💻 Windows/macOS: Automatic reconnection is supported (if the headphones were previously paired).
- 🍎 iOS: AirDots 3 Pro is running Automatic Switching (switching between iPhone, iPad and Mac).