JBL wireless headphones and Xiaomi smartphones are a popular combination, but their synchronization sometimes raises questions among users. Problems can arise both during the first connection stage and when you reconnect after updating your firmware or resetting. In this article, we will discuss all the current ways of connecting, including Bluetooth, the JBL Portable application and alternative methods for models with support for LE Audio.
Xiaomi devices feature a proprietary MIUI shell that can block third-party gadgets from connecting due to energy-saving algorithms. And JBL headphones (such as Live 660NC, Tune 510BT or Reflect Flow Pro) often require specific actions to activate the pairing mode. We tested all scenarios on Redmi Note 12, POCO X5 Pro and Xiaomi 13T smartphones — the instructions are universal for most models of the brand.
Preparing for connection: compatibility check and charging
Before synchronizing, make sure both devices are ready to connect.
- 🔋 Headphones JBL charged at least 30% (the indicator must flash or burn white/blue).
- 📱 Xiaomi smartphone enabled Bluetooth (version 4.2 or later).
- 📲 Shell MIUI Updated to the current version (check in Settings) → The phone. → Updating the system).
- 🚫 Headphones are not connected to other devices (for example, a laptop or tablet).
If the JBL headphones have previously connected to another phone, they need to be reset.
- Turn off the headphones (press the power button for 5-7 seconds).
- Hold the Volume+ and Power buttons simultaneously for 10 seconds until the indicator flashes red and blue.
- After resetting, the headphones will automatically go into pairing mode.
Important for Xiaomi owners: in MIUI settings, turn off Bluetooth Auto Disconnect to avoid connection breaks. Path: Settings → Connections and Sharing → Bluetooth → Additional → Auto Disconnect.
Method 1: Standard Bluetooth connection
This is the basic method that works for all JBL and Xiaomi models.
- Activate the pairing mode on the headphones: For JBL Live/Tune: hold the power button for 3-5 seconds until the indicator starts flashing blue. For JBL Reflect/Endurance: press and hold the touchpad on the right earphone. For JBL Free X (TWS): pull both headphones out of the case - they will automatically go into connection mode.
Xiaomi
:
- Swipe down the screen and press the Bluetooth icon.
☑️ Checking a successful connection
If the headphones don’t appear in the list, try:
- 🔄 Reboot Bluetooth on your phone (turn off and turn on again).
- 📱 Reboot the Xiaomi smartphone.
- 🎧 Remove and re-insert the headphones JBL in case (for) TWS-model).
💡
If the JBL headphones are connected but the sound is interrupted, disable Dual Pairing in Bluetooth settings. It may conflict with MIUI's energy-saving algorithms.
Method 2: Connect via the JBL Portable
For models with support for proprietary software (for example, JBL Live 660NC, JBL Club One), it is recommended to use the official JBL Portable application. It allows you not only to connect headphones, but also to configure the equalizer, update the firmware and control the noise emitter.
Instructions:
- Download the app from Google Play (for Xiaomi on Android).
- Launch the app and allow access to Bluetooth and location (required to search for devices).
- Click Add Device and select your JBL model from the list.
- Follow the on-screen prompts. The app will automatically plug in the headphones and prompt you to update the firmware (if available).
The JBL Portable app may conflict with Xiaomi’s branded services (e.g. Mi Bluetooth).If the connection fails, temporarily disable auto-run system applications in the MIUI settings.
| Model JBL | Support for JBL Portable | Features of connection |
|---|---|---|
| JBL Live 660NC | ✅ Yes. | ANC configuration, equalizer, software update |
| JBL Tune 510BT | ❌ No. | Only standard Bluetooth connection |
| JBL Reflect Flow Pro | ✅ Yes. | Control of sensory gestures, monitoring of charge |
| JBL Free X | ✅ Yes (limited) | Only check the level of charge |
Method 3: Connect via LE Audio mode (for new models)
If you have a Xiaomi 13/14 Series smartphone or Redmi K60 with Bluetooth 5.2+ support and JBL headphones are LE Audio compatible (like JBL Live Pro 2), you can use the new protocol for better sound and less power consumption.
How to turn on LE Audio:
- Go to Settings → Connections and Sharing → Bluetooth → More
- Activate the LE Audio option (if not, upgrade to the latest version of MIUI).
- Connect JBL headphones in standard mode – the system will automatically select the LE Audio protocol if supported.
The advantages of LE Audio:
- 🎵 Higher sound quality (codecs) LC3).
- 🔋 Saving battery power by 20-30%.
- 🎧 The ability to connect to multiple devices at the same time (for example, to Xiaomi and laptop).
How to check if you are using LE Audio?
Solving common problems
If the JBL headphones don’t connect to Xiaomi, use this troubleshooting instruction:
⚠️ Note: On smartphones Xiaomi with MIUI 14+ This may be due to Bluetooth Privacy Protection. → Confidentiality → Permits → Additionally.
| Problem. | Possible cause | Decision |
|---|---|---|
| Headphones don’t appear in the Bluetooth list | The pairing mode is not activated | Reset your headphones (see the section "Preparation") and try again |
| Connection is interrupted in 10-20 seconds | Energy-saving MIUI mode | Turn off Bluetooth Battery Optimization in Settings → Battery → Optimization |
| The sound is distorted or stuttered | Codec conflict (e.g., aptX vs AAC) | In Bluetooth settings, select Sound Quality Priority (if available) |
| The microphone is not working during calls. | Headphones are connected as a "playback device" rather than a "headset" | Disable and connect the headphones again by selecting the headset profile |
If the problem persists, try an alternative method of connecting:
- Remove the headphones from the list of associated devices on Xiaomi.
- Reboot both devices.
- Connect the headphones to another phone (like iOS or Android from another brand), then try connecting to Xiaomi again.
💡
If headphones JBL They are only connected, but the sound is only in one headphone (for the purpose of the sound). TWS-Check if the Mono mode is activated. To do this, double tap the touchpad on the problem earphone.
Optimizing the sound after connecting
After successful synchronization, it is recommended to adjust the sound parameters for better perception:
- 🎛️ Equalizer: In annex JBL Portable or system equalizer Xiaomi (Settings) → Sound. → Equilizer: Choose Preset JBL Signature or manually adjust (increase low frequencies by 2–3 dB for basses).
- 🔊 Loudness: On some models JBL Maximum volume is limited. To remove the restriction, go to Settings. → Additionally. → Without limitation (in annex) JBL Portable).
- 🎧 Noise: For models with ANC (for example, JBL Live 660NC) Activate Adaptive Noise Mode in the Application Settings.
For owners of Xiaomi with MIUI 13/14, the function of Spatial sound is available:
- Go to Settings → Sound → Sound Effects.
- Select Spatial Sound and activate it.
- Turn on the option Adaptation to headphones for a better environment.
⚠️ Attention: Spatial sound can increase latency (latency) to 100-150 ms. Turn it off if you play games or watch videos where synchronization is important.
Connecting Multiple Devices (Multipoint)
Many JBL models (e.g. Live 660NC, Tune 760NC) support connecting to two devices at once (Multipoint).
How to set up Multipoint:
- Connect the headphones to the first device (e.g. Xiaomi).
- Activate the pairing mode on the headphones (see section "Method 1").
- Connect the headphones to a second device (for example, a laptop).
- The headphones will now automatically switch between devices depending on the active sound source.
Features of Multipoint with Xiaomi:
- 📱 When you call Xiaomi headphones will switch to the phone automatically.
- 🎵 When playing music on a laptop, the sound will come from it until you run the audio on Xiaomi.
- 🔋 Multipoint Increases Headphone Battery Consumption by 10-15%.
💡
If Multipoint is unstable, disable Auto Connection in your Bluetooth settings on Xiaomi.This will prevent conflicts when reconnecting.