How to reset your settings on Xiaomi headphones: a complete guide with photos

Xiaomi headphones are some of the most popular wireless gadgets on the market due to their combination of price, sound quality and functionality. However, even the most reliable technology sometimes requires a reboot: headphones can start to connect unstablely, produce distorted sound or refuse to sync with each other at all, 90% of which helps reset to factory settings, a procedure that returns the device to its original state, as after purchase.

In this article, we will analyze how to properly reset on different models of Xiaomi headphones - from budget Redmi Buds to flagship Xiaomi Buds 4 Pro.

🔍 When it is necessary to reset (and when it does not help)
📱 Step-by-step instructions for TWS-headphones of all generations
⚠️ What not to do during the procedure
🔧 Alternative ways to solve problems without resetting

Particular attention will be paid to the hidden functions of the firmware, which the manufacturer does not advertise, but which can save the headphones from contacting the service center.

When you need to reset settings on Xiaomi headphones

Resetting to factory parameters is not a universal solution to all problems, but an extreme measure that should be resorted to only in certain cases.

🎧 The headphones are not synchronized with each other (left / right do not connect at the same time)
🔌 The device is not defined by any gadget (phone, laptop, tablet)
🔊 Constant communication breaks or sound stuttering when listening
🔋 Incorrect charge display (for example, 100% immediately changes to 1%)
🔄 Headphones spontaneously switch between devices

However, there are situations where resetting will not help:

💧 Physical damage (water hit, fall, cable rupture)
🔋 Bloating or failure of the battery (replacement is required)
🎛️ Problems with Bluetooth module on the connected device (phone/PC)

📊 What kind of Xiaomi headphone problem are you facing?

Not connecting to the phone.

One earpiece is down.

Bad sound/noise

They're discharged fast.

Another problem.

If your problem doesn’t make it to the first list, try alternative methods first (which we’ll discuss at the end of this article) and resets all user settings, including the Mi Account (if any) link.

Preparation for resetting: what to do in advance

Before you start resetting, follow a few mandatory steps to avoid additional problems:

Check the headphones. Make sure that at least 30% of the charge is left in the case. If the headphones run out during the procedure, it can damage the firmware.
Turn off the headphones from all devices. Go to the Bluetooth settings on your phone/PC and delete the (Forget the device) pair of Xiaomi.
Prepare an alternative sound source, and after the reset, the headphones will have to be reconnected and tuned.

Case charge >30%|Headphones are disconnected from all devices|There's a backup headset.|Instructions for connecting at hand-->

Pay special attention to your headphone models. The reset procedure may be different for:

🎧 Xiaomi AirDots (1st and 2nd generation)
🎧 Redmi Buds (3/3 Pro/4/4 Pro/5)
🎧 Xiaomi Buds (3/3 Pro/4/4 Pro)
🎧 Xiaomi FlipBuds and others

Some models (such as the Xiaomi Buds 3T Pro) have a hidden reset menu that is activated by a non-standard button combination.

Resetting settings on Xiaomi headphones: a universal way

Most of the time. TWS-Xiaomi headphones support the standard reset procedure through a button on the case:

🎧 Redmi Buds 3/3 Lite/3 Pro/4/4 Pro
🎧 Xiaomi AirDots 2/3/3 Pro
🎧 Xiaomi Buds 3/3 Pro/3T/3T Pro

Instructions:

Put both headphones in the case and close the lid.
Connect the case to the power source (the charging indicator will light up).
Press and hold the button on the case for 10-15 seconds.
The indicator will flash red and white – this is a signal of a successful reset.
Disconnect the case from charging and reconnect to the phone.

What to do if the indicator does not flash?

If after 15 seconds of holding the button, the indicator does not start to flash, try: 1. Use another charger (sometimes the case does not recognize a weak current). 2. Remove the headphones from the case, wait 30 seconds and repeat the procedure. 3. For models with touch control (for example, Xiaomi Buds 4 Pro), try holding the touch panel on both headphones simultaneously for 20 seconds.

For touch-controlled models (such as Xiaomi Buds 4 Pro or FlipBuds Pro), the procedure is different:

Put the headphones in the case.
Open the case lid.
Touch and hold the touchpads on both headphones simultaneously for 10 seconds.
The indicator on the case will flash red-white-red - the reset is completed.

💡

If the headphones don’t connect to your phone after reset, try connecting them to another device (like a laptop) and then back to your smartphone, which helps wake up the Bluetooth module.

Reset for specific models: features and nuances

Some Xiaomi headphones have unique combinations for resetting, and the table below shows the current data for popular models (as of 2026):

Model	Resetting method	Notes
Redmi Buds 3 Lite	Hold the button on the case for 12 seconds (blinking in red and white)	After resetting, the headphones automatically go into pairing mode.
Xiaomi Buds 3T Pro	Triple tap on the left-ear headphone touchpad in the case	It only works when the case is connected to charging.
Xiaomi AirDots 2	Hold the button on the case for 15 seconds (the indicator will go out, then blink)	If the indicator does not go out, the case is discharged
Xiaomi FlipBuds Pro	Hold the touch panels on both headphones for 8 seconds	After reset, you need to update the firmware through Mi Home
Redmi Buds 4 Pro	Four-time pressing of the case button in 2 seconds	The method only works on firmware 1.4.0.6 and later.

For models Xiaomi Buds 4 Pro and the newer reset can be done through the application Mi Home:

Open Mi Home → Choose your headphones.
Go to Settings → Additional → Resetting settings.
Confirm the action (earphones should be in the case with the lid open).

💡

For headphones with Mi AI support (for example, Xiaomi Buds 4 Pro), reset via the application is preferable – it saves the history of firmware updates.

What not to do when resetting settings

Mistakes during resets can cause headphones to break or lose functionality, and these are key mistakes to avoid:

⚠️ Warning: Never remove headphones from a case during a reset, which can cause the sync between the left and right earphones to break, requiring repairs at a service center.

🔌 Do not use non-original chargers. Weak or unstable current can interrupt the resetting process.
📱 Do not connect your headphones to your phone until the procedure is complete (the indicator should stop blinking).
🔋 Do not drop your headphones when the case is below 20.
🔄 Do not reset more than 1 time per hour.Frequent reboots can damage the device's memory.

Be especially careful with models that support LC3-codecs (e.g. Xiaomi Buds 4 Pro) A wrong reset can reset codecs, which will lead to a deterioration in the sound quality.

⚠️ Note: If after resetting headphones ceased to support AAC or aptX, run a firmware update through Mi Home. Otherwise, the sound will be transmitted in a reduced quality.

Alternative ways to solve problems without resetting

Before resorting to radical measures, try more gentle methods of restoring the work of headphones:

🔄 Reboot the Bluetooth module on your phone: Turn off Bluetooth in the settings. Reboot your smartphone. Turn on Bluetooth and try to reconnect.
🎛️ Resetting Bluetooth settings on your phone: Settings → System system → Resetting settings → Resetting Wi-Fi, mobile network and Bluetooth settings This will remove all saved devices, but often solves connection problems.
🔋 Full discharge and charge headphones: Discharge headphones and case to 0%. Charge to 100% with the original cable. Reconnect.

If the problem is to desynchronize the headphones (for example, the left one works and the right one does not), try:

Put both earphones in the case.
Wait until the indicator on the case stops flashing (usually 30-60 seconds).
Get your headphones out – they should automatically sync.

💡

For models that support Mi AI Assistant (such as Xiaomi Buds 4 Pro), try saying the voice command “Reset settings” – this sometimes works even without manual reset.

Frequent errors and their solutions after resetting

Even after a successful reset, there can be problems, and here are the most common ones and ways to fix them:

Problem.	Possible cause	Decision
Headphones don't connect to the phone	Residual Bluetooth data in your phone	Remove the device from the list of conjugates and search again
The sound is interrupted or distorted	Resetting codecs (e.g. aptX)	Update the firmware through Mi Home
One earpiece is down.	Razsynchronization after reset	Put both earbuds in the case for 1 minute, then pull out
Case doesn't charge headphones.	Resetting of the power controller	Connect the case to charging for 12 hours (full cycle)

If Xiaomi earphones stop supporting gestures after reset (for example, double-touch for playback), it means that the user settings have reset.

Through the Mi Home app (Gestural Management section).
Through Bluetooth Settings on your phone (if the model supports settings without an app).

How do you get back factory gestures?

If you don’t remember which gestures were default, most Xiaomi models have the following settings: – Double touch: playback/pause – Triple touch: next track – Hold: call voice assistant – Swipe up/down: volume adjustment (if supported)

FAQ: Answers to Frequent Questions

Reset doesn't work, the indicator doesn't blink. What do we do?

If you hold the button, the indicator on the case doesn't respond: Try another charger (better the original one from Xiaomi). Leave the case on charging for 10 minutes, then try again. For models with touch control, try holding the case button, not the case button, but the touch panels on the headphones themselves. If nothing helps, the case controller may be defective (repair).

After reset, the headphones only connect one at a time. How do you fix it?

This is a typical desynchronization problem. Solutions: Put both earbuds in the case and close the lid for 1 minute. Pull out the headphones, they should automatically sync (the indicator flashes white). If it doesn't work, reset again, but this time don't plug the case into the charge. For Redmi Buds 4 Pro models, try updating the firmware through Mi Home.

Can I reset Xiaomi headphones without a case?

Without the case, a full reset is impossible, but you can try a partial reset: On models with buttons, hold the button on one earphone for 10 seconds. On models with touch controls, touch and hold the touchpad for 15 seconds. The earpiece should reset (the indicator will blink). This is not a complete reset, but sometimes helps to restore communication with the case.

How to find out the model of your headphones Xiaomi?

There are several ways: Look at the box or in the documentation (the model is indicated next to the barcode). In the Mi Home app, the model is displayed in the device name. On some models, the name is applied to the inside of the case (for example, MDZ-45-DA for Redmi Buds 4 Pro). In Bluetooth settings, the phone sometimes displays the full name (for example, Xiaomi Buds 3T Pro).

Will the reset delete the firmware history? Do I need to update the software after it?

It depends on the model: For Redmi Buds 3/4 And Xiaomi AirDots reset does not affect the firmware - you do not need to update. 3 Pro/4 Pro and newer resets resets the firmware to factory settings. It is recommended to update the software via Mi Home. To check the relevance of the firmware, open Mi Home. → pick out the headphones → Settings → Firmware update.