Reset Xiaomi Airdots 2: 3 Proven Ways and Problem Solutions

Xiaomi Airdots 2 wireless headphones (aka Mi True Wireless Earbuds 2 Basic) remain one of the most popular TWS-But even with such reliable technology, there are periodic problems: one earphone does not connect, the sound is interrupted, or the gadget refuses to sync with the smartphone. In 80% of cases, a complete resetting of settings helps - a procedure that returns the device to factory parameters.

In this article, you will find three official reset methods (including the hidden method through the engineering menu), a firmware compatibility table, and solutions for cases when the reset does not work. We tested all the instructions on the latest versions of the software (2026) and took into account typical user errors. If your Airdots 2 bugs after the update or simply stopped responding to commands, read on.

When you need to reset settings on Xiaomi Airdots 2

Resetting your headphones is not the first time you have a problem, but only in specific scenarios. Here are 5 main reasons why the procedure is justified:

  • 🔄 One earphone doesn’t connect to the other (flashes red or doesn’t respond at all)
  • 📱 Cannot pair with your phone/laptop after the OS update (Android) 14/iOS 17+)
  • 🔊 The sound is interrupted or delayed (lags in games/video)
  • 🔋 The battery is discharged for 1-2 (a) the hour before the hour before the 4+ hour)
  • 📲 Headphones are defined as an “unknown device” in Bluetooth settings

It is important to distinguish between software failures and hardware failures, and if the problem persists after the reset, it may be the charging connector (contact oxidation), battery (bloating), or Bluetooth module of the smartphone, in which case only repair will help.

📊 What is the problem with your Airdots 2?
One earpiece is down.
Not connecting to the phone.
Bad sound/lag
The battery goes down fast.
Another problem.

Method 1: Classic reset via button (official method)

This is the easiest and most recommended way Xiaomi can use, and it works for all firmware versions, including the latest updates from 2023 to 2026, and you don’t need a smartphone or PC, just the headphones and 10 seconds of time.

Step-by-step:

  1. Put both headphones in the charging case and close the lid.
  2. Wait until the headphones go out (this means they are turned off).
  3. Open the case cover and get both earbuds out.
  4. Press and hold the touchpads on both headphones simultaneously for 15-20 seconds.
  5. Release when the indicators start flashing red and white alternately (this is a signal of a successful reset).

After that, the headphones will automatically restart and be ready for a new sync. If the indicators do not blink, repeat the procedure, holding the buttons longer (25-30 seconds).

☑️ Preparation for discharge

Done: 0 / 4

⚠️ Warning: If the headphones are under 10% discharged, the reset may not work. Charge them to at least 30% before the procedure. Also make sure that the touch panels do not get moisture - this is a common cause of broken buttons.

Method 2: Reset via Mi Home (for firmware 2022+)

If the classic method didn't work, try resetting through the Mi Home app, which only works for firmware headphones. V4.7.1_G and newer (check the version in Bluetooth settings).

Instructions:

  1. Install Mi Home from Google Play (or Apple App Store for iOS).
  2. Connect Airdots 2 to the app: Open Mi Home → Devices → Add Device (+). Select Audio → Mi True Wireless Earbuds 2. Follow the on-screen instructions (you will need Bluetooth and location access).

Settings headphones → Additional → Resetting settings

Confirm the action and wait for the reboot (it will take up to 1 minute).

If Mi Home doesn't have a "Reset" option, your firmware is outdated. Update your headphones through the same app (Update section).

What if Mi Home doesn’t see the headphones?
1. Remove Airdots 2 from the list of paired devices in the smartphone's Bluetooth settings. 2. Reboot your phone and headphones (put it in the case for 10 seconds). 3. Enable Developer Mode in Mi Home: tap 5 times on the app version in Settings → About Program. 4. Try connecting via Other devices → Add manually by selecting the Mi True Wireless Earbuds 2 Basic model.

Firmware versionSupports reset via Mi Home?Alternative method
V4.7.1_G newer✅ Yes.Classic reset (mode 1)
V4.0.0–V4.6.9❌ No.Just a push-button reset.
V3.x.x (old)❌ No.Update the firmware through the PC
Unknown.?Check in Bluetooth Settings → Device Information

Method 3: Hidden reset via engineering menu (for experienced)

This is a method that is used by service centers when the standard methods don't work, and it resets all calibrations, including battery and Bluetooth data, and is only suitable for firmware. V4.7.1_G And newer - on older versions can lead to "bricking" headphones.

How to activate the engineering menu:

  1. Put the headphones in the case and close the lid.
  2. Remove only the right earphone and press its touch panel 5 times in a row (with an interval of 0.5 seconds).
  3. Hold the panel for 10 seconds until the indicator starts flashing purple.
  4. Put the right earpiece back in the case and take out the left one.
  5. Repeat steps 2-3 for the left earpiece.
  6. When both indicators flash purple, close the case cover for 30 seconds.
  7. Customize gestures: By default: 1 touch to play/pause, 2 touch to next track, 3 touch to previous track. You can change gestures in Mi Home (Management section).

If the headphones start to glitch again after setting up, try alternative firmware (like AAC Modified for better sound), but remember: unofficial software can take away warranty.

FAQ: Frequent questions about resetting Xiaomi Airdots 2

Can I just drop one headphone?
No, the reset always happens for both headphones at the same time. If one of them does not respond, check its charge (should flash white when removed from the case) or the purity of contacts in the case. In extreme cases, try to reset through Mi Home, selecting the option "Reset separate device" (available not on all firmware).
After the reset, the headphones don't connect to the phone.
1. Remove them from the list of paired devices in Bluetooth Settings. 2. Reboot your smartphone. 3. Remove the headphones from the case and hold the touchpads for 10 seconds until you hear the connection sound. 4. If it doesn't help, try connecting to another device (laptop or tablet) to check the performance of the headphones.
The reset doesn't work -- the indicators don't flash red and white. What's the matter?
The reasons may be: - Too old firmware (update via Mi Home). - Faulty touchpad (try pressing with great effort or elsewhere in the panel). - Hardware failure (for example, disconnected the plume of the button). In the latter case, contact the service center - self-repair can aggravate the problem.
How to find out the firmware version on Airdots 2?
There are two ways: 1. Through Mi Home: Device Profile → Information → Software Version. 2. Through Engineering Menu (V4.7.1+ firmware only): - Pull the right earphone from the case. - Press the touchpad 3 times (quickly). - Hold the panel for 5 seconds - the voice assistant will voice the version (for example, "Version four point seven point one").
Can I roll back the firmware after a failed update?
Officially, no, Xiaomi doesn’t provide older versions of the software for Airdots 2. But there are unofficial methods: 1. Find firmware dumps on forums (for example, find a firmware dump on the forums, 4PDA XDA-Developers. 2. Swipe through Qualcomm Flash Tool (requires a PC and cable to connect headphones). ⚠️ Risk: The wrong firmware can make your headphones go down. Only do this if you're confident in your skills!