Using Xiaomi’s smart bracelet often becomes a routine when the device starts to work unstable, users face interface freezes, problems connecting to a smartphone or refusing to display notifications. In such situations, the only right solution is to completely reset the device to factory settings, which deletes all temporary files and returns the system to its original state.
Reset procedure may be required not only if there are errors, but also when transferring the gadget to another owner.It is important to understand that Hard Reset will completely clear the accumulated activity statistics if it was not synchronized with the cloud storage of the application. Before starting any manipulations, make sure that the battery charge of your Mi Smart Band is at least 50% to avoid disconnection at a critical moment.
Recovery methods vary depending on the firmware version and the specific tracker model. Some versions allow cleaning through the menu of the bracelet itself, while others require the use of third-party software or a mobile application. We will look at all the current ways to help reanimate your gadget without going to the service center.
When you need to reset the fitness bracelet settings
The main indication for the procedure is malfunctioning software: if the screen goes out but the sensors continue to burn, or if the bracelet stops responding to touch, a software failure is present, and flashing or reset is required if the device is endlessly trying to connect to the phone, but the connection is constantly broken.
Another common reason is to sell or donate a device, which means not only untethering the device from your account, but also erasing all personal data, and the fitness tracker stores your pulse history, your walking routes, and other personal information that the new owner shouldn't see.
Sometimes users just want to update the list of available dials or reset the Bluetooth module settings. In such cases, a complete reset may not be necessary, just rebooting or reconnecting in the Mi Fitness or Zepp Life app will be enough. However, if simple methods do not help, radical measures become inevitable.
Preparation of the device and application before resetting
Before you start cleaning, you need to perform a number of preparatory steps, which minimizes the risk of loss of important data and ensures the successful completion of the operation, make sure that your smartphone is in the zone of confident reception of the signal and the bracelet is charged.
- 📱 Make sure that the Zepp Life or Mi Fitness app is updated to the latest version through the Google Play Store or App Store.
- 🔋 Charge the bracelet to minimum. 60-70%, Since the discharge process is energy intensive and interruption can lead to a brick».
- ☁️ Open the application and force synchronize data by clicking on the update button in the main menu.
- 📝 Record or take pictures of important settings, such as step goals or alarm clocks, to quickly recover them from the scoring.
It's also important to check the firmware version. Sometimes the problem is solved not by a reset, but by a software update. Go to the device profile in the app and check the Update Check section. If a new version is available, install it - this can fix the bugs without losing data.
💡
Before reset, be sure to untie the device in the application, otherwise after cleaning, problems with re-binding may occur.
If you plan to use third-party utilities for resetting (which will be discussed below), they must be downloaded and installed in advance. ADB-commands or specialized programs require drivers on the computer or access rights on Android-smartphone.
Reset via the menu of the bracelet itself (Mi Band 6, 7, 8, 9)
Starting with the Mi Band 6 and the newer versions (7, 8, 9), the reset function came directly through the device interface, which is the safest and most correct method, not requiring a phone connection, but is only available if the touch screen responds to touch.
To perform the procedure, you need to unlock the screen and scroll through the menu to the Settings item (cog icon). In the list that opens, you need to find the System section or the Reset item immediately.
⚠️ Warning: Once the reset is confirmed through the bracelet menu, it will automatically reboot. Do not try to connect it to the phone right away - the cleaning process may take up to a few hours. 2-3 minute.
In some firmware, the path may be slightly different. For example, in Mi Smart Band 8, you need to select Settings → System → Reset. Confirm the action by clicking on the green tick. The device will vibrate and go out, then the reboot cycle will begin. If the bracelet asks you to select a language after turning on, then the reset was successful.
☑️ Reset algorithm through menu
It's worth noting that this method isn't always available if the system is dead, so the screen might not respond to swipes and you'll have to look for alternative solutions, and a menu reset doesn't always clear the Bluetooth cache completely, so sometimes you need to have an extra uncoupling in the app.
Using the Zepp Life and Mi Fitness app to clean up
Xiaomi’s official apps provide a handy tool to manage the device, including the detachment function. While this is not always a complete Factory Reset, for many cases, disconnecting from your account is enough. The process is as follows: open the app, go to profile and select your bracelet.
In the device menu, find Control or scroll down to Unbind. The system will warn that data will be deleted from the phone, but not necessarily from the bracelet itself. However, once unset, the bracelet often goes into pairing mode, which is equivalent to resetting the connection settings.
| Action. | Zepp Life | Mi Fitness | The result |
|---|---|---|---|
| The path to the menu | Profile → Mi Band → Management | The device → Settings | Access to options |
| Reset button | Unbind (Unbind) | Disconnect/Reset | Breaking the link |
| Data retention | Data in the cloud remains | Data in the cloud remains | Security of data |
| Condition of the bracelet | Ready to pair | Ready to pair | Clean start. |
If the standard undocking doesn’t help and the bracelet continues to hang in the phone’s memory, try uninstalling the app completely and then installing it again, and then when you first start up, the system may suggest clearing the cache of Bluetooth devices, which sometimes helps to solve the problem.
What to do if the bracelet is not removed from the application?
It rather breaks the logical connection. To completely delete user data, a combination of actions is often required: uncoupling in the application + resetting through the wristband menu (if available).
Third-party utilities and methods for advanced users
For models that don’t have a reset menu (like the old Mi Band 2, 3, 4) or if the system is completely locked, enthusiasts use third-party tools. One popular solution is the Notify for Mi Band app (formerly Notify & Fitness for Mi Band), which allows you to control many hidden tracker features.
In this application, you need to connect to the bracelet, then go to the section "Mi Band" → "Action Menu" (or "Actions"). There may be an option "Factory Reset" or "Reboot" available. Using such programs requires caution, since interference with system processes can lead to unstable work.
⚠️ Note: Using third-party reset software may void the warranty. Use these methods only if the official methods do not work and you are aware of the risks.
There is also a PC flashing method using amazfit-tools (older models) or similar open-source projects on GitHub, which involves putting the bracelet into DFU mode and downloading a clean firmware image, the most radical method that is guaranteed to erase all data.
💡
Third-party utilities are a last resort, and 95 percent of the time, a regular reset through a menu or re-association is enough.
If you decide to flash it, make sure you download the firmware file for your model and region. Wrong firmware (e.g., from global to Chinese) can turn the bracelet into a useless piece of plastic. Always check the hash sums of files and other users' reviews.
Solving problems after resetting and reconfiguring
After successfully completing the reset procedure, the bracelet returns to the "out of the box" state. QR-code or suggestion to scan the code through the application. At this stage, it is important to perform pairing correctly to avoid repeated errors.
Don't try to connect the bracelet right away through your phone's Bluetooth settings. Xiaomi requires you to use a proprietary app to set up your initial setup. Open Zepp Life or Mi Fitness, log in to akkaMi Account and click Add Device. The app will find the bracelet and prompt you to complete the setup.
- 🔄 When pairing, you may need to confirm on the bracelet screen (vibration or tick).
- 📲 Allow the application to access all requested: geolocation, notifications, contacts.
- ⌚ Wait for the firmware update if the application offers to do this immediately after connecting.
- 🚫 If the bracelet is not, turn on and off Bluetooth on your phone, and also reboot the smartphone itself.
A common problem after reset is time desynchronization. If the clock shows the wrong time, just pull the app screen down for forced synchronization.Time and date are taken from the smartphone, so make sure the phone has an automatic time setting.
Does the bracelet not see the phone after the reset?
In some cases, after reset, the interface may work slower than usual in the first few years. 10-15 It's okay, it indexes files and adjusts the background, and it gives the device time to warm up without doing anything.