Xiaomi Earphones 2 Basic reset: a complete guide with photos and nuances

Xiaomi Earphones 2 Basic wireless headphones are a popular price-performance model, but even they sometimes require a factory reset, which may be needed if the headphones stop connecting to the phone, malfunction after a firmware update, or “forgot” pairing with the previous device. Unlike flagship models like the AirDots Pro, the Earphones 2 Basic does not have a mobile application to control, so the reset is performed exclusively with hardware buttons.

In this article, you will find all the current reset methods for Xiaomi Earphones 2 Basic, including visual cues, typical user errors and alternative methods if the standard procedure did not work. We will also discuss how to distinguish soft reset from hard reset (return to factory settings), and when to apply. If your headphones suddenly stopped responding to presses or make strange sounds, here you will find a solution.

When you need to reset Xiaomi Earphones 2 Basic

Resetting headphones is not a universal cure for all problems, but 80 percent of the time it helps to get the device back to work.

• 🔄 Headphones do not connect to a phone or laptop, although previously worked stably.
• 🎧 One of the headphones (left or right) does not make a sound, although the charge is.
• 🔋 After updating the firmware appeared artifacts of sound or headphones spontaneously turn off.
• 📱 Headphones connect to another device (such as someone else’s phone) without your knowledge.
• 🔊 The headphones are constantly heard interference, although the sound source is fine.

If the problem does not make it to this list, it may be a hardware malfunction (such as a discharged battery or a damaged speaker), in which case the reset will not help - you will need repair or replacement.

⚠️ Attention: Reset removes all stored pairings with devices. After the procedure, the Xiaomi Earphones 2 Basic headphones will have to be reconnected, as after purchase.

Preparation for resetting: what to do in advance

Before you start resetting, follow a few simple steps to avoid the typical mistakes:

1. Check the headphones. Make sure that the case has at least 30% charge (the indicator should burn white or green). If the indicator is red or flashing, charge the device for at least 15 minutes.
2. Turn off the headphones from all devices. Go to the Bluetooth settings on your phone/laptop and remove the Xiaomi Earphones 2 Basic from the list of associated devices.
3. Check your physical condition. Make sure the buttons on your headphones are not stuck or damaged. If the MFU button (multifunctional) is not pressed, the reset may not work.

If you have updated your headphone firmware through third-party utilities (such as Mi Fit or Xiaomi Wear), note that a reset will return the standard version of the software, not the one installed manually. LC3-codec for Android 13+).

Method 1: Standard reset via button (official method)

This is the main method recommended by the manufacturer. It works 95% of the time and doesn't require any additional devices. You'll only need the headphones and the case.

Step-by-step:

1. Place both earbuds in the case and close the lid. Wait 10 seconds, they should automatically shut down.
2. Open the case cover, but don't take the headphones out.
3. Press and hold the touch button on the right earphone for 10-15 seconds, and the indicator on the case will flash red and white (or only red on the older versions).
4. Release the button. The indicator should be permanently white, which is a signal for a successful reset.
5. Close the case, wait 5 seconds, and remove the headphones. Now they're ready for a new pairing.

If the indicator does not flash red, try to repeat the procedure by holding the button longer (up to 20 seconds).

Headphones do not automatically connect to previous devices |

Case indicator burns white when opened |

First connection requires proof of conjugation |

The sound on the switch is different from the previous one (shorter signal)-->

Method 2: Alternative reset through prolonged retention (if the standard one didn’t work)

If the official method didn't work, try the extended procedure, which has a longer hold on buttons and additional case manipulation.

Instructions:

1. Remove both headphones from the case and place them next to you.
2. Press and hold the touch buttons on both headphones at the same time.
3. After 5 seconds, the headphones will flash red. Keep holding the buttons.
4. In another 10 seconds (total 15 seconds), the blinking will turn red and white. Release the buttons.
5. Place the headphones back in the case and close the lid for 20 seconds.
6. Get your headphones out - they should be dropped.

This method works if the headphones are stuck at the firmware level or conflict with the saved Bluetooth settings, and if it doesn't work, move on to the next method.

⚠️ Warning: Do not repeat this method more than 3 times in a row. Excessive reset attempts can lead to blocking of the Bluetooth module in the headphones, and then you will need to flash through the service center.

Method 3: Reset via forced power outage (extreme case)

If Xiaomi Earphones 2 Basic headphones are no longer responsive to presses (no flashing, no sound), you can try forced discharge. This method is risky, but sometimes helps to "reanimate" the device.

How to do this:

1. Leave the headphones on outside the case until completely discharged (the indicator will go out, the sounds will cease to play).
2. Place them in the case and charge for at least 2 hours, even if the indicator caught fire earlier.
3. After full charging, perform a standard reset (Method 1).

This method works if the failure is caused by a Bluetooth cache overflow or an error in energy saving mode, but it will not help with hardware breakdowns (for example, if the battery or power controller fails).

Table: Comparison of reset methods for Xiaomi Earphones 2 Basic

Important: If none of the methods worked and the headphones are still not turned on or connected, most likely the problem is in the hardware (for example, a damaged Bluetooth module or power controller).In this case, contact the Xiaomi service center - self-repair can lead to a complete loss of warranty.

What to do after resetting: setting up and connecting

After a successful reset, Xiaomi Earphones 2 Basic headphones will return to factory settings.

1. Connect to the device: 📱 On Android: Go to Settings → Bluetooth, select Xiaomi Earphones 2 Basic and confirm pairing. 🍎 On iPhone: Settings → Bluetooth, wait for the headphones to appear in the list and click “Connect».

Check the sound:

Update the firmware (optional):

Mi Fit

Xiaomi Wear

If the headphones are connected after reset, but the sound is intermittent or with a delay, try:

• 🔄 Restart your phone/laptop.
• 📶 Disable other Bluetooth devices nearby (they may interfere).
• 🎵 In Bluetooth settings, select Sound Quality Priority (on Android).

💡

If the headphones are connected but quickly shut down, try rolling back the Bluetooth stack version on your phone. On Android, you can do this through the developer settings (Disable AVRCP 1.6 or Disable A2DP Hardware Offload).

Frequent Mistakes and How to Avoid Them

Many users make the same mistakes when resetting Xiaomi Earphones 2 Basic, which leads to unsuccessful attempts.

• ⏱️ Not enough hold time. Most users release the button in 5-7 seconds, although it takes at least 10-15 seconds to reset. Count to yourself to 20 to make sure the procedure is over.
• 🔋 Headphones are discharged. If the indicator on the case is red, the reset may not work%.
• 📱 Failure to remove headphones from the Bluetooth list.Be sure to remove Xiaomi Earphones 2 Basic from the paired devices on the phone before resetting, otherwise they can automatically connect with the old settings.
• 🔄 Use the wrong earpiece, reset only through the right earpiece (the main button is on it), pressing the left earpiece won't do anything.

If you’ve done everything right but the headphones still don’t work, check them on another device (like a tablet or laptop) to help determine if the problem is in the headphones or your phone.

💡

If after 3-4 attempts to reset the headphones do not respond, do not continue experiments - contact the service. Excessive manipulation of the buttons can damage the sensor or control board.

FAQ: Answers to Frequent Questions