═══ SHOCK 2: ARTICLE BODY ═══
Many smart gadget owners sooner or later face a situation when the wearable device begins to work incorrectly. Fitness bracelet may stop syncing with the smartphone, hanging on the logo or just showing incorrect pulse data, in such cases, the most effective solution is often a complete cleanup of the device’s memory from user data and settings.
The factory reset procedure on Xiaomi and Huami devices may vary depending on the model and firmware version. It is important to understand the difference between a simple disconnection from the phone and a deep system reset. In this article, we will discuss all available methods, including software and hardware solutions to problems.
This operation will help eliminate software errors that accumulate during long-term use. Resetting through the menu of the bracelet itself is available only on Mi Band 4 models and later with a color screen. Older versions will require the use of third-party software or special combinations of actions.
When you need a complete reset of a smart bracelet
It's not always worth taking drastic measures right after the first bug appears, but there are scenarios where hard reset is the only right solution, and if your device stops responding to touch or your screen goes off immediately after you turn on, it's a clear sign of a system failure.
Often, problems arise after a failed firmware update. If the process of writing new data was interrupted or there was a failure in the transmission of packets, the device can go into a cyclical restart, in which case cleaning the cache and settings allows you to delete the damaged configuration files.
Reset is also necessary when selling the gadget or transferring it to another user, which ensures that your personal data, including training history and biometrics, do not fall into the wrong hands.
⚠️ Warning: Once reset is complete, all accumulated steps, sleep and pulse data will be permanently deleted from the device. Make sure the information is synced with the Mi Fit or Zepp Life app.
Preparation of the device and smartphone for the procedure
Before you start active actions, you need to make sure that the battery is charged at least 30-40%. interruption of the reset process due to battery discharge can cause the microcontroller of the device will cease to respond to commands. Put the tracker on charging 15-20 minutes before work begins.
The second important step is to check the stability of the Bluetooth connection, make sure that the smartphone is in close proximity to the bracelet, sometimes to successfully execute the command requires turning off the Wi-Fi on the phone to prevent radio interference in the 2.4 GHz band.
It is recommended to update the companion app to the latest version in advance. Older versions of Mi Fit or Zepp Life may not have the necessary drivers or commands to manage new tracker models. Check for updates in the Google Play store or App Store.
☑️ Checklist of preparations
Reset method via Zepp Life and Mi Fitness app
The safest and most correct way to return the device to factory status is to use official software, which ensures that all pairing profiles are properly deleted and internal memory is cleaned without risking damage to system files.
To start, open the app on your smartphone and go to the device profile. In the Zepp Life interface, select your bracelet from the list of connected devices. Then scroll down to the very end where the device control button is located.
Click on Untie or Unpair, and the system will issue a warning that all data will be deleted, confirm the action, and the smartphone will send the team to the fitness tracker, the process will take no more than 30 seconds, after which the bracelet will reboot to its original state.
What to do if the “untie” button is inactive?
The Mi Fitness app (for new models) has the same logic: Profile -> Device Selection -> Scrolt down -> Untie. Then a confirmation request may appear on the tracker screen, which must be received by touching the touch area.
Hardware reset via the menu of the bracelet itself
Owners of Mi Band 4, Mi Band 5, Mi Band 6 and newer versions have the ability to reset directly from the screen of the gadget. This is convenient if the smartphone is lost, the application is removed or the phone can not find the device.
To get into the settings menu, swipe your finger across the screen to the right or left (depending on the firmware version) until you find the gear icon or the "More" icon. In the list that opens, look for "System" or "Reset" immediately.
Once you select Reset, the device will request confirmation, because it's a critical operation, and you usually press and hold the touch button or click the tick, and the bracelet vibrates, the screen goes out, and in a few seconds, the welcome logo will appear.
| Model of the device | The way is on the menu | Confirmation |
|---|---|---|
| Mi Band 4 | More -> Settings -> Reset | Touch + |
| Mi Band 5/6 | Settings (cogs) -> System -> Reset | Touching the tick |
| Mi Band 7/8 | Settings -> System -> Reset | Long press. |
| Redmi Band | Settings -> About the system -> Reset | Touch + |
💡
Hardware reset via the bracelet menu does not require a smartphone at hand, but is only available on models with a color display and an extended menu.
Use of third-party utilities for complex cases
If standard methods don't work and the bracelet is "hang-up" or doesn't respond to the application commands, you can use specialized software. One of the most popular tools is the Notify for Mi Band app, which has advanced control functions.
To use this method, install the application, pair (if possible), and go to the Tools or Mi Band Tools section. There is a feature called "Factory Reset" or "Reboot" that sends special messages. AT-commands directly to the Bluetooth tracker module.
There is also a "deep discharge" method, which is a last resort: leave the bracelet on next to a working Bluetooth emitter until the battery is completely discharged. Then put it on charge. When turned on, some models automatically initiate a system check, which can help to get out of the error cycle.
⚠️ Note: Using unofficial applications and modified versions of firmware may result in a loss of warranty. Use third-party software only if official methods are powerless.
Common Errors and How to Resolve Them
During the reset process, users are often confronted with a message saying "Disabled to reset" or "Time-out connection."This means that a command has been sent, but the device did not respond within the allotted time. Try restarting the smartphone and trying again.
Another common problem is that the bracelet resets but does not appear on the list of available devices for new pairing, in which case you need to go to the phone's Bluetooth settings, find the old Mi Band entry, and select "Forget the device" or "Delete."
If the wristband screen is on but the sensor is not responding, try gently pressing the touch button area several times in a row, sometimes helping to unlock the interface and log into the menu to perform a regular reset.
💡
If the bracelet is not visible after reset, turn on and off Bluetooth on the phone 3-4 times in a row - this will clear the scan cache and help to detect the device again.
Setup of the device after recovery
After successfully returning to factory settings, the device welcomes you to choose a language: choose Russian or English to continue.
It is important to take your time to install all the widgets and dials. First, give the device 5-10 minutes to back-sync the time and baseline settings, which will allow the tracker operating system to stabilize the modules.
When you reconfigure, it is recommended not to restore the backup immediately if the problem was a software failure. Try working with the clean device for a couple of days. If the errors do not recur, then the cause was in the damaged configuration data.