How to reset the settings Xiaomi Mi Band to factory

The Xiaomi Mi Band fitness bracelets have proven to be reliable and durable devices that can run for years without failure. However, even the most stable electronics sometimes encounter software errors that require radical intervention. If your tracker stops syncing with your smartphone, freezes on the logo or displays incorrect pulsemeter data, the only right solution is often a complete reset.

Factory resetting may be required not only when critical errors occur, but also before selling the device to a new owner.Resetting all data ensures that your personal information, training history and personal settings are completely removed from the memory of the gadget.

In this guide, we will take a detailed look at all the available methods for restoring the health of your smartwatch, we will examine the standard methods through the mobile application, the methods of forced reboot for hanging devices and the nuances of working with different versions of firmware, carefully following the instructions will help bring the device back to life without going to the service center.

Preparation for the discharge procedure and important nuances

Before you take any action, you need to make sure that the device is ready to restart the system. Battery charge is a critical parameter: if the energy level drops below 10-15% during the formatting process, there is a risk of damage to the system files or complete failure of the module. Connect the bracelet to the charger and wait until the indicator shows a sufficient level of charge.

It’s also worth taking care to save the accumulated statistics if they’re important to you. Although the data is usually stored in the cloud of your Mi Fitness or Zepp Life account, manual synchronization before reset will be a good precaution. Make sure that Bluetooth on your smartphone is active and the application itself is updated to the latest version available in the official store.

⚠️ Warning: The reset process is irreversible, and once completed, all the accumulated history of steps, sleep, and heart rate that was not synchronized with the server will be irretrievably lost.

There are several scenarios where intervention in the software part is necessary, most often users are faced with a situation where the bracelet stops responding to touch or does not see the phone, in which cases forced restart often solves the problem of the frozen processes.

• 📱 The device does not appear in the list of available Bluetooth gadgets when scanning.
• ⏱ The tracker screen is gone and does not respond to touching or lifting the wrist.
• 🔄 Endless reboot cycle or hanging on the screensaver with the brand logo.
• 📉 A sharp increase in battery consumption or incorrect operation of sensors.

Reset via Zepp Life and Mi Fitness app

The safest and most recommended way to return the device to its original state is to use official mobile software. The interface of the Zepp Life (formerly Mi Fit) and Mi Fitness applications allows you to control most of the parameters of the tracker remotely. First, open the application on your smartphone and make sure that your bracelet is connected and displayed on the home screen.

Go to the device profile, usually at the bottom of the screen or in the Profile menu. Find the section that controls the gadget itself. Depending on the software version, the item may be called Device Settings, System, or have a gear icon, and that's where the detachment and reset function is hidden.

You need to find the option "Sever Connection" or "Unbind" in the settings menu. Once you click on this button, the system will request confirmation of your actions. The application will warn you that all data will be deleted from the bracelet, but can be stored in the cloud akkaMi account. Accept the terms and the cleaning process will begin.

Importantly, after the disconnection procedure, the tracker will return to the state it was in immediately after being removed from the box. QR-If you plan to sell the device, this stage is a must so that the new owner can connect it to his phone.

• 🔗 Open the main menu of the application and select your tracker.
• ⚙️ Go to the device profile settings.
• 🗑 Press the "Unbind" button).
• ✅ Confirm the action in the pop-up window.

Forced reboot when the system freezes

When the bracelet's software interface stops responding to commands, it's less common, but it requires a special approach: If the screen burns but doesn't respond to touch, or if the device doesn't turn on at all, standard methods through the application won't work, in which case hardware reset or simulate battery discharge is required.

Many Xiaomi Mi Band models, starting with the fourth version, don't have a physical button on the body, which makes it difficult to reboot, because the classic (long press) is not applicable here. However, engineers have provided an alternative method: completely discharging the device. Leave the tracker on until it completely loses charge and turns off.

Once the screen is out and the device is no longer responsive, connect it to the charger. At the time of power, many models automatically perform a cold start cycle, which is equivalent to resetting temporary files and restarting the system operating system. If the bracelet is on and working normally, the problem is solved.

⚠️ Warning: Do not attempt to disassemble the bracelet body or close contacts on the board yourself, this will lead to loss of warranty and can permanently disable the electronics.

For some advanced users, there is a method of using third-party utilities such as Mi Bandage or Notify for Mi Band. These applications have advanced functionality and sometimes allow you to send a command to restart even when the official application “sees” the device but can not manage it.

• 🔋 Wait for the battery to fully discharge before shutting down.
• 🔌 Connect the charger to start the system.
• 📲 Use third-party utilities to send a reboot command.
• ⏳ Wait. 5-10 minutes after connecting to the charger.

Comparison of recovery methods: table

The choice of the specific method depends on the current state of your gadget and the goals you are pursuing. Software reset via the application is suitable for routine data cleansing or before sale. Hardware methods are necessary in critical situations when the software has ceased to respond.

Below is a table to help you determine the most appropriate way. Pay attention to the risk column: the more radical the method, the higher the probability of data loss or errors if the procedure is interrupted.

Solving synchronization problems after reset

Once you have successfully reset, you may experience a situation where the phone and the bracelet "can't see" each other, which is normal because the pairing keys have been removed, but sometimes the reconnection process can be delayed or error-prone.

The first thing you need to do is remove the old device from the Bluetooth list in the settings of the smartphone itself. Find the Mi Band or Mi Smart Band in the list, click on the gear or information icon, and select Forget the device or Unpair the pairing. This will free up the communication channel for a new attempt.

Then open the Zepp Life or Mi Fitness app and start looking for new devices. Make sure you're close enough to the bracelet (no further than 1-2 meters). If the search doesn't work, try restarting the smartphone itself - this will clear the cache of the phone's Bluetooth module.

💡

If the bracelet is not after reset, try turning on geolocation (GPS) on your smartphone. In modern versions of Android, location permission is mandatory for Bluetooth Low Energy scanners to work.

In rare cases, a firmware update is required immediately after pairing, the application may suggest installing a new version of the software, which will take several minutes.

• 📵 Remove the device from your phone's Bluetooth settings.
• 🔄 Reboot your smartphone to reset the Bluetooth stack.
• 📡 Enable geolocation for correct search.
• 🔗 Perform the pairing again through the application.

Frequently Asked Questions (FAQ)

In conclusion, we will answer the most popular questions that users have when working with reset functions, these answers will help to dispel remaining doubts and avoid typical errors.

💡

Regular resets are not required for prevention, and only perform this procedure if there are real problems with the device or when transferring the gadget to another user.

Understanding how to reset the Xiaomi Mi Band is an important skill for any owner of this popular gadget.Using the right restore features allows you to extend the life of the device and its correct operation throughout its life.Remember that in most cases software failures are solved by simple methods that do not require complex hardware.