The Chinese giant’s wearable electronics owners often face situations where the Mi Band is no longer working properly, such as a lack of data synchronization, sudden interface freezes, or improper display of notifications from a smartphone, in which case the most effective solution is to completely reset the device to factory parameters, which eliminates software errors.
The procedure for cleaning the tracker memory does not require complex technical skills or special equipment. However, it is important to understand the difference between simply disconnecting a gadget from an application and deep formatting its internal memory. The correct approach ensures that the device returns to the “out of the box” state, ready for a new setup without saving old configuration errors.
In this guide, we will take a look at all the available methods for restoring the health of your smartwatch, we will look at the standard tools of the mobile application, hardware methods for different generations of devices and specialized utilities for advanced users. Following the described algorithms will help to revive the gadget in the shortest possible time.
Preparation for the resetting procedure
Before you start cleaning, you need to perform a number of preparatory steps, which minimize the risk of losing important training data and ensure the stability of the procedure, first of all, make sure that the battery level is at least 50%, as a sudden shutdown during formatting can lead to critical firmware errors.
Also, you should break the connection in your smartphone’s Bluetooth settings beforehand, which will prevent automatic re-synchronization during the reset process, which can interrupt the execution of the command. Disabling Bluetooth on the phone is a must before you start manipulating the tracker itself.
⚠️ Before resetting, make sure that all important heart rate and steps data for the current day are synchronized with the server, otherwise they will be irretrievably lost.
If you plan to sell a device or transfer it to another user, pre-cleaning data through the application is mandatory, this ensures the confidentiality of your personal information and travel history.
Reset via Mi Fitness and Zepp Life app
The safest and most recommended way to return to factory settings is through the official mobile application. The interface of the programs Zepp Life (formerly Mi Fit) and Mi Fitness (formerly Xiaomi Wear) is almost identical in this aspect. First, open the application on your smartphone and go to the tab Profile in the bottom menu.
From the list of connected devices, select your bracelet. After you go to the device menu, scroll down to the very end of the screen, and you'll find "Unlock" or "Unbind." Pressing this button initiates the process of disconnecting the connection and automatically resetting the tracker settings.
- 📱 Open the Zepp Life or Mi Fitness app on your smartphone.
- 🔗 Go to the Profile section and select your bracelet.
- 🗑️ Click the "Unlock" button at the bottom of the options list.
- ✅ Confirm the action in the pop-up warning window.
Once the action is confirmed on the smartphone screen, the tracker vibrates and reboots. The brand logo will appear on the display, which indicates the successful completion of the procedure. Software reset via the application is the most gentle method, since it correctly closes all background processes before formatting.
☑️ Pre-reset check
Hardware reset for different Mi Band models
In situations where the bracelet is stuck and does not respond to touch, or the application does not see the device, hardware techniques are required. The mechanics of action depend on the generation of the device, as manufacturers have changed the logic of controlling the touch screen and side buttons.
For Mi Band 4, 5, 6, 7 and 8 models with a touchscreen display without physical buttons, the “deep discharge” method often helps. Leave the device on until the battery is completely exhausted. Once the screen goes out, put the gadget on charge and, without turning it on, try to perform the standard pairing procedure.
Button models, such as the Mi Band 2 or larger Amazfit watches, allow you to perform Hard Reset with a key combination. Usually you need to pinch the only button available for 15-20 seconds before the logo appears. If this does not help, discharge the device to zero.
| Model of the device | Type of management | Resetting method | Duration of clamping |
|---|---|---|---|
| Mi Band 2 / 3 | Touch button | Sensor clamping | 10-15 seconds |
| Mi Band 4-8 | Full touchscreen | Discharge + Charge | Before you turn it off |
| Amazfit Bip | Physical button | Double-push | 5 seconds |
| Mi Watch Lite | Sensor + Button | Settings menu | N/D |
It is important to understand that in modern touch-sensitive models without buttons, a full hardware reset without the application is often impossible due to the peculiarities of the firmware architecture, in which case the only way out is to wait for discharge or search for specialized software.
What to do if the bracelet is warm?
Use of third-party utilities for resetting
When standard methods fail, third-party tools developed by enthusiasts come to the rescue. One of the most popular Android solutions is the Notify for Mi Band app, which has extended access rights to data exchange protocols and can force a reset command.
To work with the utility, you need to download and install APK-file from a trusted source. Once installed, launch the application and pair with your tracker. In the device management menu, find the "Tools" or "Service" section".
- 🔧 Download Notify for Mi Band from Google Play.
- 🔌 Connect the bracelet through the program interface.
- ⚙️ Find the "Factory Reset" section in the device settings.
- 🚀 Start the command and wait for the gadget to restart.
Third-party software often allows you to solve problems that are not within the power of official applications, such as resetting a forgotten one. PIN-However, using such programs requires caution, since an incorrect command can damage the partition table of memory.
⚠️ Note: Using modified versions of applications or third-party software may result in a loss of warranty on the device.
For iOS users, third-party intervention is limited by the operating system’s security policies, and iPhone owners often rely on the official app or method of discharging the device completely.
💡
When using third-party utilities, always back up your data if this is technically feasible through file export.
Solving synchronization problems after reset
After successfully returning to factory settings, the user may find it difficult to reconnect. The smartphone can "remember" the old pairing and try to use outdated encryption keys.
Find the name of your bracelet (e.g. Mi Band 5) in the list of previously connected devices and click "Forget device" or "Unpair it." Only after clearing the list in Bluetooth can you start searching for a new device through the application.
If the bracelet is not detected during the scan, try restarting the smartphone itself. Often, Bluetooth services on Android or iOS can freeze, and a simple restart restores their correct operation. Rebooting the phone is a universal remedy for many communication problems.
Also make sure that the app has no tails left from the previous installation. In rare cases, a complete reinstallation of the Mi Fitness or Zepp Life app helps with pre-cleaning its cache through the Android settings.
💡
The main reason for connection problems after reset is the saved profile in the smartphone’s Bluetooth memory, which must be manually removed.