How to Link Xiaomi AirDots to Your Phone: Instructions for All Models (2026)

Xiaomi AirDots wireless headphones (including Redmi AirDots, Mi True Wireless Earbuds and Mi Air 2/3) remain among the most popular gadgets in the Mi Ecosystem line. Their main advantage is the ease of connection, but even here users face nuances from the lack of response to the on button to problems with synchronization among themselves. This article will help you understand how to properly tie AirDots to an Android or iOS smartphone, what to do if the headphones are not defined, and how to avoid typical errors.

We’ll look at not only the standard pairing procedure, but also the hidden Mi Code features that make it easier to connect to Xiaomi devices. And for older models (like the 2019 Redmi AirDots S), we’ll give you the current ways to reset settings — they’re often required after a long downtime or firmware update. If you’ve tried to connect your headphones to your phone, but failed, skip the first partition and go straight to solving problems.

Which Xiaomi AirDots models support fast tethering?

Not all Xiaomi wireless headphones connect the same way, and not only does the design depend on the model, but the pairing protocol, the presence of a mi-code, and even the order of action when you first turn on, and here is a table of key differences:

If your model is not listed in the table, check its name on the box or in the documentation. For example, Redmi AirDots 2 (model TWSEJ04LS) and Mi AirDots Pro 2 (TWSEJ09LS) have different connection protocols. For new devices (2022 and later), it is recommended to use the Mi Earphones brand application, which automatically determines the model and offers optimal settings.

Standard connection to Android and iOS

The process of linking Xiaomi AirDots to a phone is virtually the same as other wireless headphones, but there are a few key points that are often overlooked:

1. Remove the headphones from the case. On most models, the power button is on the back of the case (e.g., Redmi AirDots) or on the headphones themselves (e.g., Mi Air 2). Some devices (e.g., Xiaomi Buds 4 Pro) are activated automatically when the cover is opened.
2. Activate the pairing mode: 🔄 Press and hold the button on the case (3-5 seconds) until the white/red indicator flashes. 🎧 In models with touch control (for example, Mi Air) 2S) Touch and hold the touchpad on both headphones at the same time.

Find the headphones in the list of devices

• 📱 On Android: Go to Settings → Connected devices → New device.
• 🍎 On iOS: Open Settings → Bluetooth and wait for Mi True Wireless (or similar name) to come along).

Advantages of Mi Code:

• 🔗 Automatic sync with Mi Account (earphones will be available on all your Xiaomi devices).
• 📊 Displaying the charge level of the case and each headphone in real time.
• ⚡ Quick reconnect after discharge (no need to re-search the device in Bluetooth).

If the pop-up window does not appear, check:

• 📱 Is Mi Code enabled in settings: Settings → Connection and sharing → Mi Code.
• 🔄 Update the firmware of the smartphone (on versions) MIUI Below 12.5 Mi Code may not work properly).
• 🔋 Headphone charge level (at a charge below 20% Mi Code may not work).

💡

If Mi Code doesn't work, try turning off and re-enable Bluetooth on your smartphone. Sometimes rebooting your phone with pre-removal helps. SIM-cards (this resets the cache of the Bluetooth module).

Solving Connection Problems

Even with the right actions, Xiaomi AirDots may not be tethered to the phone.-5 causes and ways of eliminating them:

1. Headphones are not defined in the Bluetooth list

If after activation of the pairing mode, the device does not appear in the search:

• 🔋 Check the case charge: connect it to charging for 10-15 minutes, then try again.
• 🔄 Reset the headphone settings (instruction below).
• 📱 Restart your phone and turn on Device Search in Bluetooth settings.