How to tie a Xiaomi scooter to a phone: instructions for all models (2026)

Tethering Xiaomi’s electric scooter to a smartphone is a must-do step to unlock top speed, adjust driving modes and monitor battery status. Without the correct connection to the official Mi Home or Xiaomi Scooter app, you won’t be able to use the scooter at full capacity, and some features (such as cruise control or lock-in) will not be available.

In this article, we will analyze the step-by-step binding process for all current models - from Mijia. M365 Update to Xiaomi Electric Scooter 4 Pro, including solutions to typical problems (Bluetooth errors, device reset, firmware incompatibility) and pay special attention to the updated requirements of 2026, as with the release of new versions of applications, the synchronization algorithm has changed.

1.What Xiaomi Scooters Require Phone Tethering

Not all Xiaomi electric scooters need binding, but without it, you lose key features. Here is a full list of models for which syncing with the phone is critical:

• 🛴 Xiaomi Mijia M365 — The first mass model, requires a tether to unlock speeds above 20 km / h.
• 🛴 Xiaomi M365 Pro – similar to the basic version, but with an increased power reserve.
• 🛴 Xiaomi 1S — improved version of the E-ABS, binding is necessary to activate energy-saving modes.
• 🛴 Xiaomi Pro 2 – supports the proprietary application Xiaomi Scooter with extended telemetry.
• 🛴 Xiaomi 3 Lite / 3 / 3 Pro – all modifications require synchronization to update the firmware.
• 🛴 Xiaomi 4 / 4 Pro - new models 2023–2026 year with improved Bluetooth 5.0, But the binding algorithm stayed the same.

Important: Xiaomi scooters without being tethered to the phone operate in “guest mode” – the speed is limited to 20-25 km / h, energy-saving functions are disabled, and data on the mileage and battery status are not stored.

If you bought a used scooter, it must be reset to the factory settings before being tied to the new phone, otherwise the device will remain "tied" to the previous owner, and synchronization will be impossible.

2. Which application to use for binding

From 2026, Xiaomi officially recommends two applications for scooters management:

1. Mi Home is a universal application for the entire Xiaomi ecosystem, including scooters, suitable for all models, but the interface is less adapted for two-wheeled transport.
2. Xiaomi Scooter (formerly Mi Scooter) is a specialized software with advanced settings (brake adjustment, battery calibration, detailed travel statistics) since 2023 supports only 3 Lite models and newer ones.

Important: Mi Home may not display a scooter in the device list if the phone settings select a region outside of China. To fix this, go to Mi Home profile → Settings → Region and select Mainland China.

⚠️ Note: If you use Xiaomi Scooter for models M365 or Pro 2, some features (such as firmware updates) may not work properly.

3. Step-by-step instruction for linking the scooter to the phone

The synchronization process takes no more than 5 minutes, unless the scooter has previously been tied to another device.

Turn on Bluetooth on your phone

Charge the scooter at least 20%

Install the Mi Home or Xiaomi Scooter app

Press the power button on the scooter 1 time (to activate)

-->

1. Turn on the scooter. Press the power button once, the indicator should light up (white or green light). If the indicator flashes red, the scooter is discharged (you need to charge at least 20%).
2. Activate Bluetooth on your phone. Make sure your phone is not connected to other devices (earphones, smartwatches) - this can interfere with finding a scooter.
3. Launch the app. In Mi Home: press + → Add the device → Transportation → Electric scooter. in Xiaomi Scooter: click Connect Scooter → Start the search.

Choose a model of scooter.

Other

Put the phone to the scooter.

Confirm the binding.

PIN-code

0000

1234

If the scooter is successfully tied, its basic information will appear in the application:

• 🔋 Battery level of charge.
• 📊 Total mileage.
• ⚙️ Affordable driving modes (Eco, Standard, Sport).
• 🔒 Blocking status (if the scooter is blocked, a reset will be required).

⚠️ Note: If the scooter is not unlocked after the tie (an error remains). E:014 or E:018), The previous owner has not removed his binding, in which case a complete reset of the scooter is required (instruction in the next section).

💡

If the scooter is not in the app, try rebooting the Bluetooth module: turn off the scooter, press the power button for 10 seconds, then turn it on again.

4.How to Reset Xiaomi Scooter Before a New Bind

If the scooter previously belonged to another owner or issues errors when connecting (E:014, E:018, E:022), It needs to be reset to factory settings. The procedure varies depending on the model:

Method 1: Software reset (for 3 Lite and newer models)

1. Turn on the scooter.
2. Press the power button and the brake button simultaneously for 5-7 seconds until the double signal sounds.
3. Release the buttons - the scooter will reboot and reset the settings.

Method 2: Hardware reset (for M365, 1S, Pro 2)

Older models require physical shutdown of the controller:

1. Turn off the scooter.
2. Remove the bottom cover (a screwdriver will be required). T20).
3. Unplug the battery connector for 10 seconds, then plug it back in.
4. Turn on the scooter - it will be in factory condition.

Important: Once reset, the scooter will lose all mileage and settings data. If you drop someone else's scooter, make sure the previous owner untie it in his app (otherwise, the binding may not work).

5. Solving common problems in binding

Even if instructions are followed correctly, users often encounter errors, and consider typical cases and ways to fix them:

If none of these methods helped, check:

• 📱 Version Android/iOS: Mi Home and Xiaomi Scooter apps require Android 8.0+ iOS 12+.
• 🔄 Scooter firmware updates: outdated software may conflict with new versions of applications.
• 🛡️ Phone security settings: Some brands (like Huawei or Xiaomi) block app background work – add Mi Home to exceptions.

💡

If the scooter makes a mistake E:022, This means a hardware fault in the controller, which you can't fix by yourself, you need to go to the service center.

6. How to untie Xiaomi scooter from your phone

If you're selling a scooter or you want to tie it to another device, you first need to untie it from your current account, and you can do this in two ways:

Method 1: Through the application (if the scooter is connected)

1. Open Mi Home or Xiaomi Scooter.
2. Select your scooter in the list of devices.
3. Go to Settings. → Remove the device (in Mi Home) or Untie the scooter (in Xiaomi Scooter).
4. Confirm the action.

Method 2: Forced uncoupling (if the scooter is not available)

If the scooter is broken or you can’t connect to it:

1. Sign in to your Mi Account at account.xiaomi.com.
2. Go to the Device Management section.
3. Find your scooter in the list and click Delete.

⚠️ Attention: Once uncoupled, the scooter is automatically locked. To unlock it, the new owner must undergo the binding procedure again (see section 3).

7. Additional settings after binding

After successful synchronization, it is recommended to adjust the scooter to your needs. Here are the key parameters that can be changed:

• 🚀 Driving modes: Eco - economical mode (maximum speed) ~15 km/h, increased range). Standard - balance of speed and power consumption (~20–25 km/h). Sport – top speed (up to 30 km/h for Pro 2 and 4 Pro).
• 🔒 Locking from theft: Turns on the beep and blocks the wheels when you try to steal (activated via Settings) → Security).
• 📊 Travel statistics: Includes a record of routes, average speed and energy consumption (available at Xiaomi Scooter).
• 🔋 Battery calibration: It is recommended to be performed every 3 months to accurately display the charge level (c Settings) → Battery).

Important for models 4/4 Pro: These scooters have Automatic firmware updates. Turn it on to get bug fixes and new features without manual updates.

💡

If you often drive in the rain, turn off Regenerative Braking in the settings. It can cause the wheel to lock on a wet surface.

8. Frequently Asked Questions (FAQ)