How to properly tie headphones Xiaomi to each other: instructions for all models

Xiaomi’s wireless headphones are among the most popular accessories, thanks to a combination of price, sound quality and functionality. However, many users face a problem: after buying or resetting the left and right earphones stop working synchronously, or one of them does not connect at all, the reason lies in the violation of pairing between devices, a process that often occurs automatically on the first turn on, but can be confused due to software failures or mechanical damage.

In this article, we will analyze all the ways of binding Xiaomi headphones to each other - from the standard procedure to forced synchronization through reset. Particular attention will be paid to common errors that can lead to failure, and also consider the specific nuances for different models (from budget Redmi AirDots to flagship Buds 4 Pro). If you have already tried to connect headphones, but nothing has failed, do not rush to carry them into the service: in 90% of cases, the problem can be solved independently in 5-10 minutes.

For convenience, we have separated the instructions by headphone type (TWS, neck, gaming) and firmware versions, and added a compatibility table with Xiaomi devices. If your model is not mentioned, don’t worry: most methods are universal and work even for little-known modifications.

1.Why do Xiaomi headphones "disconnect" and stop working together?

Before you start binding, it's important to understand why the headphones lost sync, most often because of:

🔹 Software failures: incorrect firmware update, conflict with a Bluetooth device (for example, if the headphones were connected to several smartphones at the same time).

🔹 Mechanical damage: falling, moisture or dust entering the contacts of the charging case.

🔹 Battery discharge: if one of the headphones is completely discharged in the case, it can "fall off" from the pair at the next turn on.

🔹 Settings reset: Some models (e.g. Redmi AirDots 2) automatically break the peg after resetting via long button hold.

Interesting fact: Xiaomi headphones use Bluetooth 5.0+ with Dual Mode support, which should theoretically guarantee stable communication. However, in practice, cheap chips in budget models (for example, Redmi AirDots S) often suffer from the “loss” of one of the headphones when reconnected.

2. standard Xiaomi headphone binding (for most models)

If the headphones are new or just disconnected, try the standard method of binding first. TWS-models (Redmi AirDots, Xiaomi Buds, Haylou, etc.):

1. Place both headphones in the case and close the lid for 10 seconds. Make sure the case is charged (the indicator should burn or blink).
2. Get both headphones out at the same time – they should automatically turn on and synchronize with each other (blitzes white / red indicator).
3. On your smartphone, turn on Bluetooth and find the name of your headphones in the list of devices (for example, Redmi). AirDots_R Mi True Wireless).
4. If you connect to them, if you're successful, you'll see one device in your Bluetooth settings (rather than two separate headphones).

⚠️

Note: If two separate devices are displayed in the Bluetooth list (e.g. Redmi) AirDots_L redmi AirDots_R) — It means that the binding has not worked, in which case you move to forced reset.

For touch-controlled models (such as the Xiaomi Buds 3 Pro), the process is slightly different:

1. Put the headphones in the case.
2. Touch and hold the touchpad on both headphones simultaneously for 10-15 seconds until the indicators start flashing red and white.
3. Get the headphones out of the case – they should automatically sync.

Put both earphones in the case for 10 seconds.|

Charge the case to at least 30%|

Make sure that Bluetooth on your smartphone is turned on |

Remove old headphone connections in Bluetooth settings (if you have been)-->

3. Forced reset and re-binding (if the standard method does not work)

If the headphones don’t sync automatically, you’ll have to reset, which works for all Xiaomi models, but the way you activate the reset is different.

For models with mechanical buttons (Redmi AirDots 1/2/3, Haylou GT1/GT2):

1. Put both headphones in the case and close the lid.
2. Press and hold the button on the case (usually side or back) for 20-30 seconds until the indicator flashes red and white.
3. Release the button, pull out the headphones – they should automatically sync.

For touch-controlled models (Xiaomi Buds 3/4 Pro, Redmi Buds 3 Lite):

1. Put the headphones in the case.
2. Touch and hold the touchpads on both headphones simultaneously for 15 seconds (until the lights flash).
3. Get the headphones out - they will reboot and sync.

💡 If one of the headphones still doesn't connect after reset, check it on another device (for example, on a PC or tablet). If the problem persists, the Bluetooth earphone module is likely to malfunction.

💡

After resetting, the headphones may lose their uniformity settings (EQ).To return factory sound, open the Mi Home or Xiaomi Wear app and update the headphone firmware (if available).

4. Binding features for specific models

Some Xiaomi headphones have unique synchronization nuances, and we put them together in a table:

⚠️

Note: Xiaomi Buds 4 Pro and newer headphones may require a firmware update before binding. If sync is not happening after reset, plug the headphones into the Xiaomi Wear app and check for updates.

5. Post-sequence problems: what to do if the headphones are unstable?

Even after successful synchronization, problems can arise:

• 🎧 One headphone is quieter than the other – check the sound balance settings in the Bluetooth settings of the smartphone (on the phone). MIUI: Settings → Bluetooth → Headphone settings → Balance of sound).
• 🔊 Permanent communication breaks – try to disable the Absolute volume function (Spatial Audio) in the headphone settings.
• 🔋 Fast discharge of one headphone – reset battery statistics through the Xiaomi Wear app.
• 📱 Gestures do not work - update the firmware of headphones and a smartphone.

If the headphones are constantly disconnected when reconnecting, try:

1. Remove them from the list of Bluetooth devices on all previously connected gadgets.
2. Disable Bluetooth on other devices nearby (may cause interference).
3. Enable Low Lag (if any) in the headphone settings.

💡

If Xiaomi headphones after the binding work unstable, in 80% of cases, it is not the device itself that is to blame, but the conflict with the Bluetooth module of the smartphone. Try connecting the headphones to another phone - if the problem disappears, update the firmware of your gadget.

6. Tethering through the Xiaomi Wear app (for advanced models)

Xiaomi Buds 3/4 Pro, FlipBuds Pro and other mid-to-premium models support tethering and customization through the Xiaomi Wear (formerly Mi Home) app, which is especially useful if standard methods don’t work.

Step-by-step:

1. Install the Xiaomi Wear app from Google Play or the App Store.
2. Open the app and click Add Device → select your headphone model.
3. Follow the instructions on the screen (usually you need to confirm the connection on your smartphone and headphones).
4. After connecting, go to the headphone settings → Reset (if necessary).

The annex may also include:

• 🔄 Update the firmware of headphones (critical for stable operation).
• 🎛️ Customize gestures and uniformity of sound.
• 📊 View the charge level of each headphone separately.
• 🔇 Turn on/off noise cancellation (ANC).

⚠️

Note: The Xiaomi Wear app may not see the headphones if they are already connected to the smartphone via Bluetooth. First remove them from the list of associated devices, then try again.

7. Alternative binding methods (if nothing helps)

If none of these methods worked, try alternative solutions:

Method 1: Forced synchronization through a sound signal

1. Put both earphones in the case.
2. Close the lid and wait 30 seconds.
3. Open the lid and tap your headphones against each other 3 times (for some models, this activates the anchor mode).
4. Get your headphones out, they need to sync.

Method 2: Connection via PC

• Connect the headphones to your computer via Bluetooth.
• In Windows Device Manager, find the headphones and update the driver (right click → Update the driver).
• Turn off and reconnect the headphones.

Method 3: Using a second smartphone

1. Connect the headphones to another phone (preferably on Android 10+).
2. If they synced, reset them and try connecting them to the main device.

FAQ: Frequent questions about Xiaomi headphones binding